From: Becky Bruce <becky.bruce@freescale.com>
Date: Wed, 5 Nov 2008 20:55:30 +0000 (-0600)
Subject: mpc86xx: Move setup_bats into cpu_init_f
X-Git-Tag: v2025.01-rc5-pxa1908~21708^2~11
X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=24bfb48c35fed6ad1f047e3e4a27df302482cd93;p=u-boot.git

mpc86xx: Move setup_bats into cpu_init_f

In order to later allow for a physical relocation of the
flash, setup_bats, which sets up the final BAT mapping
for the board, needs to happen *after* init_laws().
Otherwise, there will be no window programmed for the flash
at the new physical location at the point when we change
the mmu translation.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
---

diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
index 06f179c093..a7e6036dbe 100644
--- a/cpu/mpc86xx/cpu_init.c
+++ b/cpu/mpc86xx/cpu_init.c
@@ -33,6 +33,8 @@
 #include <asm/fsl_law.h>
 #include "mp.h"
 
+void setup_bats(void);
+
 DECLARE_GLOBAL_DATA_PTR;
 
 /*
@@ -57,6 +59,8 @@ void cpu_init_f(void)
 	init_laws();
 #endif
 
+	setup_bats();
+
 	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
 	 * addresses - these have to be modified later when FLASH size
 	 * has been determined
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 48f8c5acf5..0d30e91b61 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -272,11 +272,6 @@ in_flash:
 
 	GET_GOT			/* initialize GOT access	*/
 
-	/* setup the rest of the bats */
-	bl      setup_bats
-	sync
-
-
 	/* run low-level CPU init code	   (from Flash) */
 	bl	cpu_init_f
 	sync