From: Vasileios Amoiridis Date: Fri, 28 Jun 2024 17:35:42 +0000 (+0200) Subject: doc: api: bootcount: Convert to rST documentation X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=1c1e484ba856fa03122a01cd9e7b8e038fa5d1bc;p=u-boot.git doc: api: bootcount: Convert to rST documentation Move to the new documentation style with rST formatting. Signed-off-by: Vasileios Amoiridis --- diff --git a/doc/README.bootcount b/doc/README.bootcount deleted file mode 100644 index 0f4ffb6828..0000000000 --- a/doc/README.bootcount +++ /dev/null @@ -1,53 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0+ - -Boot Count Limit -================ - -This is enabled by CONFIG_BOOTCOUNT_LIMIT. - -This allows to detect multiple failed attempts to boot Linux. - -After a power-on reset, the "bootcount" variable will be initialized to 1, and -each reboot will increment the value by 1. - -If, after a reboot, the new value of "bootcount" exceeds the value of -"bootlimit", then instead of the standard boot action (executing the contents of -"bootcmd"), an alternate boot action will be performed, and the contents of -"altbootcmd" will be executed. - -If the variable "bootlimit" is not defined in the environment, the Boot Count -Limit feature is disabled. If it is enabled, but "altbootcmd" is not defined, -then U-Boot will drop into interactive mode and remain there. - -It is the responsibility of some application code (typically a Linux -application) to reset the variable "bootcount" to 0 when the system booted -successfully, thus allowing for more boot cycles. - -CONFIG_BOOTCOUNT_FS --------------------- - -This adds support for maintaining boot count in a file on a filesystem. -Supported filesystems are FAT and EXT. The file to use is defined by: - -CONFIG_SYS_BOOTCOUNT_FS_INTERFACE -CONFIG_SYS_BOOTCOUNT_FS_DEVPART -CONFIG_SYS_BOOTCOUNT_FS_NAME - -The format of the file is: - -==== ================= -type entry -==== ================= -u8 magic -u8 version -u8 bootcount -u8 upgrade_available -==== ================= - -To prevent unattended usage of "altbootcmd", the "upgrade_available" variable is -used. -If "upgrade_available" is 0, "bootcount" is not saved. -If "upgrade_available" is 1, "bootcount" is saved. -So a userspace application should take care of setting the "upgrade_available" -and "bootcount" variables to 0, if the system boots successfully. -This also avoids writing the "bootcount" information on all reboots. diff --git a/doc/api/bootcount.rst b/doc/api/bootcount.rst new file mode 100644 index 0000000000..9435a7ef15 --- /dev/null +++ b/doc/api/bootcount.rst @@ -0,0 +1,58 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Boot Count Limit +================ + +This is enabled by CONFIG_BOOTCOUNT_LIMIT. + +This allows to detect multiple failed attempts to boot Linux. + +After a power-on reset, the ``bootcount`` variable will be initialized to 1, and +each reboot will increment the value by 1. + +If, after a reboot, the new value of ``bootcount`` exceeds the value of +``bootlimit``, then instead of the standard boot action (executing the contents +of ``bootcmd``), an alternate boot action will be performed, and the contents of +``altbootcmd`` will be executed. + +If the variable ``bootlimit`` is not defined in the environment, the Boot Count +Limit feature is disabled. If it is enabled, but ``altbootcmd`` is not defined, +then U-Boot will drop into interactive mode and remain there. + +It is the responsibility of some application code (typically a Linux +application) to reset the variable ``bootcount`` to 0 when the system booted +successfully, thus allowing for more boot cycles. + +CONFIG_BOOTCOUNT_FS +-------------------- + +This adds support for maintaining boot count in a file on a filesystem. +Tested filesystems are FAT and EXT. The file to use is defined by: + +CONFIG_SYS_BOOTCOUNT_FS_INTERFACE +CONFIG_SYS_BOOTCOUNT_FS_DEVPART +CONFIG_SYS_BOOTCOUNT_FS_NAME + +The format of the file is: + +.. list-table:: + :header-rows: 1 + + * - type + - entry + * - u8 + - magic + * - u8 + - version + * - u8 + - bootcount + * - u8 + - upgrade_available + +To prevent unattended usage of ``altbootcmd``, the ``upgrade_available`` +variable is used. +If ``upgrade_available`` is 0, ``bootcount`` is not saved. +If ``upgrade_available`` is 1, ``bootcount`` is saved. +So a userspace application should take care of setting the ``upgrade_available`` +and ``bootcount`` variables to 0, if the system boots successfully. +This also avoids writing the ``bootcount`` information on all reboots. diff --git a/doc/api/index.rst b/doc/api/index.rst index 51b2013af3..ec0b8adb2c 100644 --- a/doc/api/index.rst +++ b/doc/api/index.rst @@ -6,6 +6,7 @@ U-Boot API documentation .. toctree:: :maxdepth: 2 + bootcount clk dfu dm