From: Fabio Estevam <festevam@denx.de>
Date: Tue, 14 Mar 2023 11:58:16 +0000 (-0300)
Subject: mx51evk: Remove unused mx51evk_video.c file
X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=0d297597762c1c979e761ce2690fba71bf9d493a;p=u-boot.git

mx51evk: Remove unused mx51evk_video.c file

Since commit 1fa43cad8625 ("video: Drop references to CONFIG_VIDEO et al")
the mx51evk_video.c is no longer used.

Remove the unused file.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---

diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c
deleted file mode 100644
index 3715c5d738..0000000000
--- a/board/freescale/mx51evk/mx51evk_video.c
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- * Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <common.h>
-#include <env.h>
-#include <linux/list.h>
-#include <asm/gpio.h>
-#include <asm/arch/iomux-mx51.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-#define MX51EVK_LCD_3V3		IMX_GPIO_NR(4, 9)
-#define MX51EVK_LCD_5V		IMX_GPIO_NR(4, 10)
-#define MX51EVK_LCD_BACKLIGHT	IMX_GPIO_NR(3, 4)
-
-static struct fb_videomode const claa_wvga = {
-	.name		= "CLAA07LC0ACW",
-	.refresh	= 57,
-	.xres		= 800,
-	.yres		= 480,
-	.pixclock	= 37037,
-	.left_margin	= 40,
-	.right_margin	= 60,
-	.upper_margin	= 10,
-	.lower_margin	= 10,
-	.hsync_len	= 20,
-	.vsync_len	= 10,
-	.sync		= 0,
-	.vmode		= FB_VMODE_NONINTERLACED
-};
-
-static struct fb_videomode const dvi = {
-	.name		= "DVI panel",
-	.refresh	= 60,
-	.xres		= 1024,
-	.yres		= 768,
-	.pixclock	= 15385,
-	.left_margin	= 220,
-	.right_margin	= 40,
-	.upper_margin	= 21,
-	.lower_margin	= 7,
-	.hsync_len	= 60,
-	.vsync_len	= 10,
-	.sync		= 0,
-	.vmode		= FB_VMODE_NONINTERLACED
-};
-
-void setup_iomux_lcd(void)
-{
-	/* DI2_PIN15 */
-	imx_iomux_v3_setup_pad(MX51_PAD_DI_GP4__DI2_PIN15);
-
-	/* Pad settings for DI2_DISP_CLK */
-	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK,
-			    PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_SLOW));
-
-	/* Turn on 3.3V voltage for LCD */
-	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D12__GPIO4_9,
-						NO_PAD_CTRL));
-	gpio_direction_output(MX51EVK_LCD_3V3, 1);
-
-	/* Turn on 5V voltage for LCD */
-	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D13__GPIO4_10,
-						NO_PAD_CTRL));
-	gpio_direction_output(MX51EVK_LCD_5V, 1);
-
-	/* Turn on GPIO backlight */
-	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI1_D1_CS__GPIO3_4,
-						NO_PAD_CTRL));
-	gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
-}
-
-int board_video_skip(void)
-{
-	int ret;
-	char const *e = env_get("panel");
-
-	if (e) {
-		if (strcmp(e, "claa") == 0) {
-			ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
-			if (ret)
-				printf("claa cannot be configured: %d\n", ret);
-			return ret;
-		}
-	}
-
-	/*
-	 * 'panel' env variable not found or has different value than 'claa'
-	 *  Defaulting to dvi output.
-	 */
-	ret = ipuv3_fb_init(&dvi, 0, IPU_PIX_FMT_RGB24);
-	if (ret)
-		printf("dvi cannot be configured: %d\n", ret);
-	return ret;
-}