From: Michal Simek <michal.simek@xilinx.com>
Date: Thu, 8 Nov 2018 09:06:53 +0000 (+0100)
Subject: arm64: dts: zynqmp: Fix node names which contain "_"
X-Git-Tag: v2025.01-rc5-pxa1908~2605^2~6
X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=096d7f5b3e1c8d7ec121891d5682c385fad12b43;p=u-boot.git
arm64: dts: zynqmp: Fix node names which contain "_"
s/_/-/ for node names.
It fixes warnings like this:
... Warning (node_name_chars_strict): /cpu_opp_table:
Character '_' not recommended in node name ...
Issues reported by make dtbs W=12
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi
index 9ef55ad0d1..c9464ec8eb 100644
--- a/arch/arm/dts/zynqmp-clk.dtsi
+++ b/arch/arm/dts/zynqmp-clk.dtsi
@@ -61,13 +61,13 @@
clock-accuracy = <100>;
};
- dpdma_clk: dpdma_clk {
+ dpdma_clk: dpdma-clk {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <533000000>;
};
- drm_clock: drm_clock {
+ drm_clock: drm-clock {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <262750000>;
diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
index 106b56b662..02573a1f32 100644
--- a/arch/arm/dts/zynqmp-zcu100-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -95,7 +95,7 @@
linux,default-trigger = "bluetooth-power";
};
- vbus_det { /* U5 USB5744 VBUS detection via MIO25 */
+ vbus-det { /* U5 USB5744 VBUS detection via MIO25 */
label = "vbus_det";
gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -120,7 +120,7 @@
regulator-boot-on;
};
- sdio_pwrseq: sdio_pwrseq {
+ sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
};
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 78110c490e..7d2f59b88c 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -58,7 +58,7 @@
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -213,25 +213,25 @@
gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
"", "", "", "", "", "", "", "", "";
- gtr_sel0 {
+ gtr-sel0 {
gpio-hog;
gpios = <0 0>;
output-low; /* PCIE = 0, DP = 1 */
line-name = "sel0";
};
- gtr_sel1 {
+ gtr-sel1 {
gpio-hog;
gpios = <1 0>;
output-high; /* PCIE = 0, DP = 1 */
line-name = "sel1";
};
- gtr_sel2 {
+ gtr-sel2 {
gpio-hog;
gpios = <2 0>;
output-high; /* PCIE = 0, USB0 = 1 */
line-name = "sel2";
};
- gtr_sel3 {
+ gtr-sel3 {
gpio-hog;
gpios = <3 0>;
output-high; /* PCIE = 0, SATA = 1 */
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index 7c73ff283e..6faac95684 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -58,7 +58,7 @@
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index ca95d7e059..5b648ceb2d 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -58,7 +58,7 @@
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 8646c4c3a3..232fd0c11c 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -74,7 +74,7 @@
};
};
- cpu_opp_table: cpu_opp_table {
+ cpu_opp_table: cpu-opp-table {
compatible = "operating-points-v2";
opp-shared;
opp00 {
@@ -252,7 +252,7 @@
};
};
- amba_apu: amba_apu@0 {
+ amba_apu: amba-apu@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;