From f7d367c2e66ec550976818b8297416f2e4e299ce Mon Sep 17 00:00:00 2001
From: Michal Suchanek <msuchanek@suse.de>
Date: Sun, 25 Sep 2022 15:28:47 +0200
Subject: [PATCH] dm: doc: Fix serial howto u-boot,dm-pre-reloc typo
In a couple of places the document says u-boot,pre-reloc but all
examples show u-boot,dm-pre-reloc, use the latter consistently.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
doc/develop/driver-model/serial-howto.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/doc/develop/driver-model/serial-howto.rst b/doc/develop/driver-model/serial-howto.rst
index 9da0e57eab..5b1d57d83a 100644
--- a/doc/develop/driver-model/serial-howto.rst
+++ b/doc/develop/driver-model/serial-howto.rst
@@ -62,7 +62,7 @@ what you need. U-Boot automatically includes these files: see :ref:`dttweaks`.
Here are some things you might need to consider:
1. The serial driver itself needs to be present before relocation, so that the
- U-Boot banner appears. Make sure it has a u-boot,pre-reloc tag in the device
+ U-Boot banner appears. Make sure it has a u-boot,dm-pre-reloc tag in the device
tree, so that the serial driver is bound when U-Boot starts.
For example, on iMX8::
@@ -79,7 +79,7 @@ Here are some things you might need to consider:
};
2. If your serial port requires a particular pinmux configuration, you may need
- a pinctrl driver. This needs to have a u-boot,pre-reloc tag also. Take care
+ a pinctrl driver. This needs to have a u-boot,dm-pre-reloc tag also. Take care
that any subnodes have the same tag, if they are needed to make the correct
pinctrl available.
--
2.39.5