From f544ff6656fca263ed1ebe39899b6d95da67c8b8 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Sat, 5 May 2007 08:29:01 +0200
Subject: [PATCH] ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting

Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
for the 4k NAND boot image so define bus_frequency to 133MHz here
which is save for the refresh counter setup.

Signed-off-by: Stefan Roese <sr@denx.de>
---
 board/amcc/sequoia/sdram.c           | 10 +++++++++-
 nand_spl/board/amcc/sequoia/Makefile |  6 +-----
 2 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
index f8b837ed28..d045df1872 100644
--- a/board/amcc/sequoia/sdram.c
+++ b/board/amcc/sequoia/sdram.c
@@ -371,6 +371,14 @@ void denali_core_search_data_eye(unsigned long memory_size)
 }
 #endif /* CONFIG_DDR_DATA_EYE */
 
+#if defined(CONFIG_NAND_SPL)
+/* Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
+ * for the 4k NAND boot image so define bus_frequency to 133MHz here
+ * which is save for the refresh counter setup.
+ */
+#define get_bus_freq(val)	133000000
+#endif
+
 /*************************************************************************
  *
  * initdram -- 440EPx's DDR controller is a DENALI Core
@@ -404,7 +412,7 @@ long int initdram (int board_type)
 	mtsdram(DDR0_22, 0x00267F0B);
 	mtsdram(DDR0_23, 0x00000000);
 	mtsdram(DDR0_24, 0x01010002);
-	if (speed > 133333333)
+	if (speed > 133333334)
 		mtsdram(DDR0_26, 0x5B26050C);
 	else
 		mtsdram(DDR0_26, 0x5B260408);
diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile
index 510999db03..b42da8cf68 100644
--- a/nand_spl/board/amcc/sequoia/Makefile
+++ b/nand_spl/board/amcc/sequoia/Makefile
@@ -30,7 +30,7 @@ AFLAGS	+= -DCONFIG_NAND_SPL
 CFLAGS	+= -DCONFIG_NAND_SPL
 
 SOBJS	= start.o init.o resetvec.o
-COBJS	= nand_boot.o ndfc.o sdram.o speed.o
+COBJS	= nand_boot.o ndfc.o sdram.o
 
 SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -69,10 +69,6 @@ $(obj)start.S:
 	@rm -f $(obj)start.S
 	ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S
 
-$(obj)speed.c:
-	@rm -f $(obj)speed.c
-	ln -s $(SRCTREE)/cpu/ppc4xx/speed.c $(obj)speed.c
-
 # from board directory
 $(obj)init.S:
 	@rm -f $(obj)init.S
-- 
2.39.5