From b1278a8e3eb1a18e65bf24f8ca338460d0ef0278 Mon Sep 17 00:00:00 2001
From: Michael Trimarchi <michael@amarulasolutions.com>
Date: Mon, 30 Dec 2019 17:34:08 +0530
Subject: [PATCH] ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset
methods
Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node
from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio
and phy-mode properties.
So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file.
Cc: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/imx6qdl-icore-1.5.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/dts/imx6qdl-icore-1.5.dtsi
index d91d46b589..0fd7f2e24d 100644
--- a/arch/arm/dts/imx6qdl-icore-1.5.dtsi
+++ b/arch/arm/dts/imx6qdl-icore-1.5.dtsi
@@ -25,10 +25,8 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
clocks = <&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET_REF>;
- phy-mode = "rmii";
status = "okay";
};
--
2.39.5