From: Michal Simek Date: Mon, 24 Feb 2014 10:16:30 +0000 (+0100) Subject: net: gem: Add OF initialization support X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-logo.png?a=commitdiff_plain;h=f88a6869a10a5a7aea4c4fda52db854a693796b0;p=u-boot.git net: gem: Add OF initialization support Gem can be directly initialized from DTB. Signed-off-by: Michal Simek --- diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 6d4001b017..101489c994 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include #include #include #include @@ -534,3 +536,43 @@ int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio) return 1; } + +#ifdef CONFIG_OF_CONTROL +int zynq_gem_of_init(const void *blob) +{ + int offset = 0; + u32 ret = 0; + u32 reg, phy_reg; + + debug("ZYNQ GEM: Initialization\n"); + + do { + offset = fdt_node_offset_by_compatible(blob, offset, + "xlnx,ps7-ethernet-1.00.a"); + if (offset != -1) { + reg = fdtdec_get_addr(blob, offset, "reg"); + if (reg != FDT_ADDR_T_NONE) { + offset = fdtdec_lookup_phandle(blob, offset, + "phy-handle"); + if (offset != -1) + phy_reg = fdtdec_get_addr(blob, offset, + "reg"); + else + phy_reg = 0; + + debug("ZYNQ GEM: addr %x, phyaddr %x\n", + reg, phy_reg); + + ret |= zynq_gem_initialize(NULL, reg, + phy_reg, 0); + + } else { + debug("ZYNQ GEM: Can't get base address\n"); + return -1; + } + } + } while (offset != -1); + + return ret; +} +#endif diff --git a/include/netdev.h b/include/netdev.h index c684014d5e..32b5073ef0 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -91,6 +91,7 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, int txpp, int rxpp); int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags, unsigned long ctrl_addr); +int zynq_gem_of_init(const void *blob); int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio); /* * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface