From: Wadim Egorov <w.egorov@phytec.de>
Date: Wed, 22 May 2024 07:55:03 +0000 (+0200)
Subject: arm: mach-k3: am625: Call do_board_detect() before DDR probing
X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-logo.png?a=commitdiff_plain;h=e63908adbdf0b2dfada86fe848006f572f7df4a3;p=u-boot.git

arm: mach-k3: am625: Call do_board_detect() before DDR probing

Call do_board_detect() hook before the K3 DDRSS driver gets probed.
It will allow boards to adjust DDR timings in do_board_detect().

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Tested-by: John Ma <jma@phytec.com>
---

diff --git a/arch/arm/mach-k3/am62x/am625_init.c b/arch/arm/mach-k3/am62x/am625_init.c
index ed8d24e043..72a752d38e 100644
--- a/arch/arm/mach-k3/am62x/am625_init.c
+++ b/arch/arm/mach-k3/am62x/am625_init.c
@@ -213,6 +213,8 @@ void board_init_f(ulong dummy)
 
 	preloader_console_init();
 
+	do_board_detect();
+
 	/*
 	 * Allow establishing an early console as required for example when
 	 * doing a UART-based boot. Note that this console may not "survive"