From: Tim Harvey <tharvey@gateworks.com>
Date: Wed, 23 Oct 2024 20:28:54 +0000 (-0700)
Subject: i2c: mxc_i2c: Convert to use livetree API for fdt access
X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-logo.png?a=commitdiff_plain;h=ad2aad701a0a3d6da37d17092003588f46259274;p=u-boot.git

i2c: mxc_i2c: Convert to use livetree API for fdt access

Convert to using livetree API functions.

Without this if livetree is enabled (OF_LIVE) the mxc-i2c
driver will fail to support scl-gpios and sda-gpios for
i2c bus recovery.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---

diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 2f3cb5908c..2dfc1c4eab 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -29,7 +29,6 @@
 #include <watchdog.h>
 #include <dm.h>
 #include <dm/pinctrl.h>
-#include <fdtdec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -867,8 +866,7 @@ static int mxc_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
 static int mxc_i2c_probe(struct udevice *bus)
 {
 	struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus);
-	const void *fdt = gd->fdt_blob;
-	int node = dev_of_offset(bus);
+	ofnode node = dev_ofnode(bus);
 	fdt_addr_t addr;
 	int ret, ret2;
 
@@ -912,17 +910,15 @@ static int mxc_i2c_probe(struct udevice *bus)
 	 * See Documentation/devicetree/bindings/i2c/i2c-imx.txt
 	 * Use gpio to force bus idle when necessary.
 	 */
-	ret = fdt_stringlist_search(fdt, node, "pinctrl-names", "gpio");
+	ret = ofnode_stringlist_search(node, "pinctrl-names", "gpio");
 	if (ret < 0) {
 		debug("i2c bus %d at 0x%2lx, no gpio pinctrl state.\n",
 		      dev_seq(bus), i2c_bus->base);
 	} else {
-		ret = gpio_request_by_name_nodev(offset_to_ofnode(node),
-				"scl-gpios", 0, &i2c_bus->scl_gpio,
-				GPIOD_IS_OUT);
-		ret2 = gpio_request_by_name_nodev(offset_to_ofnode(node),
-				"sda-gpios", 0, &i2c_bus->sda_gpio,
-				GPIOD_IS_OUT);
+		ret = gpio_request_by_name(bus, "scl-gpios", 0, &i2c_bus->scl_gpio,
+					   GPIOD_IS_OUT);
+		ret2 = gpio_request_by_name(bus, "sda-gpios", 0, &i2c_bus->sda_gpio,
+					    GPIOD_IS_OUT);
 		if (!dm_gpio_is_valid(&i2c_bus->sda_gpio) ||
 		    !dm_gpio_is_valid(&i2c_bus->scl_gpio) ||
 		    ret || ret2) {