From: Bo Shen Date: Fri, 15 Nov 2013 03:12:37 +0000 (+0800) Subject: arm: atmel: add ddr2 initialization function X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-logo.png?a=commitdiff_plain;h=9d9289cb31d8c0bf4d3708df23a24edb4205165d;p=u-boot.git arm: atmel: add ddr2 initialization function The MPDDRC supports different type of SDRAM This patch add ddr2 initialization function Signed-off-by: Bo Shen Signed-off-by: Andreas Bießmann --- diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile index fd0da530e1..b2d30b1a72 100644 --- a/arch/arm/cpu/Makefile +++ b/arch/arm/cpu/Makefile @@ -1,2 +1,3 @@ +obj-$(CONFIG_AT91FAMILY) += at91-common/ obj-$(CONFIG_TEGRA) += $(SOC)-common/ obj-$(CONFIG_TEGRA) += tegra-common/ diff --git a/arch/arm/cpu/at91-common/Makefile b/arch/arm/cpu/at91-common/Makefile new file mode 100644 index 0000000000..671a05e3d5 --- /dev/null +++ b/arch/arm/cpu/at91-common/Makefile @@ -0,0 +1,11 @@ +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2013 Atmel Corporation +# Bo Shen +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_SPL_BUILD) += mpddrc.o diff --git a/arch/arm/cpu/at91-common/mpddrc.c b/arch/arm/cpu/at91-common/mpddrc.c new file mode 100644 index 0000000000..8136396403 --- /dev/null +++ b/arch/arm/cpu/at91-common/mpddrc.c @@ -0,0 +1,124 @@ +/* + * Copyright (C) 2013 Atmel Corporation + * Bo Shen + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +static inline void atmel_mpddr_op(int mode, u32 ram_address) +{ + struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC; + + writel(mode, &mpddr->mr); + writel(0, ram_address); +} + +int ddr2_init(const unsigned int ram_address, + const struct atmel_mpddr *mpddr_value) +{ + struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC; + u32 ba_off, cr; + + /* Compute bank offset according to NC in configuration register */ + ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9; + if (!(mpddr_value->cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED)) + ba_off += ((mpddr->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11; + + ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2; + + /* Program the memory device type into the memory device register */ + writel(mpddr_value->md, &mpddr->md); + + /* Program the configuration register */ + writel(mpddr_value->cr, &mpddr->cr); + + /* Program the timing register */ + writel(mpddr_value->tpr0, &mpddr->tpr0); + writel(mpddr_value->tpr1, &mpddr->tpr1); + writel(mpddr_value->tpr2, &mpddr->tpr2); + + /* Issue a NOP command */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address); + + /* A 200 us is provided to precede any signal toggle */ + udelay(200); + + /* Issue a NOP command */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address); + + /* Issue an all banks precharge command */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address); + + /* Issue an extended mode register set(EMRS2) to choose operation */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD, + ram_address + (0x2 << ba_off)); + + /* Issue an extended mode register set(EMRS3) to set EMSR to 0 */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD, + ram_address + (0x3 << ba_off)); + + /* + * Issue an extended mode register set(EMRS1) to enable DLL and + * program D.I.C (output driver impedance control) + */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD, + ram_address + (0x1 << ba_off)); + + /* Enable DLL reset */ + cr = readl(&mpddr->cr); + writel(cr | ATMEL_MPDDRC_CR_DLL_RESET_ENABLED, &mpddr->cr); + + /* A mode register set(MRS) cycle is issued to reset DLL */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address); + + /* Issue an all banks precharge command */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address); + + /* Two auto-refresh (CBR) cycles are provided */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address); + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address); + + /* Disable DLL reset */ + cr = readl(&mpddr->cr); + writel(cr & (~ATMEL_MPDDRC_CR_DLL_RESET_ENABLED), &mpddr->cr); + + /* A mode register set (MRS) cycle is issued to disable DLL reset */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address); + + /* Set OCD calibration in default state */ + cr = readl(&mpddr->cr); + writel(cr | ATMEL_MPDDRC_CR_OCD_DEFAULT, &mpddr->cr); + + /* + * An extended mode register set (EMRS1) cycle is issued + * to OCD default value + */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD, + ram_address + (0x1 << ba_off)); + + /* OCD calibration mode exit */ + cr = readl(&mpddr->cr); + writel(cr & (~ATMEL_MPDDRC_CR_OCD_DEFAULT), &mpddr->cr); + + /* + * An extended mode register set (EMRS1) cycle is issued + * to enable OCD exit + */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD, + ram_address + (0x1 << ba_off)); + + /* A nornal mode command is provided */ + atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address); + + /* Perform a write access to any DDR2-SDRAM address */ + writel(0, ram_address); + + /* Write the refresh rate */ + writel(mpddr_value->rtr, &mpddr->rtr); + + return 0; +} diff --git a/arch/arm/include/asm/arch-at91/atmel_mpddrc.h b/arch/arm/include/asm/arch-at91/atmel_mpddrc.h new file mode 100644 index 0000000000..5741f6e94a --- /dev/null +++ b/arch/arm/include/asm/arch-at91/atmel_mpddrc.h @@ -0,0 +1,115 @@ +/* + * Copyright (C) 2013 Atmel Corporation + * Bo Shen + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ATMEL_MPDDRC_H__ +#define __ATMEL_MPDDRC_H__ + +/* + * Only define the needed register in mpddr + * If other register needed, will add them later + */ +struct atmel_mpddr { + u32 mr; + u32 rtr; + u32 cr; + u32 tpr0; + u32 tpr1; + u32 tpr2; + u32 reserved[2]; + u32 md; +}; + +int ddr2_init(const unsigned int ram_address, + const struct atmel_mpddr *mpddr); + +/* Bit field in mode register */ +#define ATMEL_MPDDRC_MR_MODE_NORMAL_CMD 0x0 +#define ATMEL_MPDDRC_MR_MODE_NOP_CMD 0x1 +#define ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD 0x2 +#define ATMEL_MPDDRC_MR_MODE_LMR_CMD 0x3 +#define ATMEL_MPDDRC_MR_MODE_RFSH_CMD 0x4 +#define ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD 0x5 +#define ATMEL_MPDDRC_MR_MODE_DEEP_CMD 0x6 +#define ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD 0x7 + +/* Bit field in configuration register */ +#define ATMEL_MPDDRC_CR_NC_MASK 0x3 +#define ATMEL_MPDDRC_CR_NC_COL_9 0x0 +#define ATMEL_MPDDRC_CR_NC_COL_10 0x1 +#define ATMEL_MPDDRC_CR_NC_COL_11 0x2 +#define ATMEL_MPDDRC_CR_NC_COL_12 0x3 +#define ATMEL_MPDDRC_CR_NR_MASK (0x3 << 2) +#define ATMEL_MPDDRC_CR_NR_ROW_11 (0x0 << 2) +#define ATMEL_MPDDRC_CR_NR_ROW_12 (0x1 << 2) +#define ATMEL_MPDDRC_CR_NR_ROW_13 (0x2 << 2) +#define ATMEL_MPDDRC_CR_NR_ROW_14 (0x3 << 2) +#define ATMEL_MPDDRC_CR_CAS_MASK (0x7 << 4) +#define ATMEL_MPDDRC_CR_CAS_DDR_CAS2 (0x2 << 4) +#define ATMEL_MPDDRC_CR_CAS_DDR_CAS3 (0x3 << 4) +#define ATMEL_MPDDRC_CR_CAS_DDR_CAS4 (0x4 << 4) +#define ATMEL_MPDDRC_CR_CAS_DDR_CAS5 (0x5 << 4) +#define ATMEL_MPDDRC_CR_CAS_DDR_CAS6 (0x6 << 4) +#define ATMEL_MPDDRC_CR_DLL_RESET_ENABLED (0x1 << 7) +#define ATMEL_MPDDRC_CR_DIC_DS (0x1 << 8) +#define ATMEL_MPDDRC_CR_DIS_DLL (0x1 << 9) +#define ATMEL_MPDDRC_CR_OCD_DEFAULT (0x7 << 12) +#define ATMEL_MPDDRC_CR_ENRDM_ON (0x1 << 17) +#define ATMEL_MPDDRC_CR_NB_8BANKS (0x1 << 20) +#define ATMEL_MPDDRC_CR_NDQS_DISABLED (0x1 << 21) +#define ATMEL_MPDDRC_CR_DECOD_INTERLEAVED (0x1 << 22) +#define ATMEL_MPDDRC_CR_UNAL_SUPPORTED (0x1 << 23) + +/* Bit field in timing parameter 0 register */ +#define ATMEL_MPDDRC_TPR0_TRAS_OFFSET 0 +#define ATMEL_MPDDRC_TPR0_TRAS_MASK 0xf +#define ATMEL_MPDDRC_TPR0_TRCD_OFFSET 4 +#define ATMEL_MPDDRC_TPR0_TRCD_MASK 0xf +#define ATMEL_MPDDRC_TPR0_TWR_OFFSET 8 +#define ATMEL_MPDDRC_TPR0_TWR_MASK 0xf +#define ATMEL_MPDDRC_TPR0_TRC_OFFSET 12 +#define ATMEL_MPDDRC_TPR0_TRC_MASK 0xf +#define ATMEL_MPDDRC_TPR0_TRP_OFFSET 16 +#define ATMEL_MPDDRC_TPR0_TRP_MASK 0xf +#define ATMEL_MPDDRC_TPR0_TRRD_OFFSET 20 +#define ATMEL_MPDDRC_TPR0_TRRD_MASK 0xf +#define ATMEL_MPDDRC_TPR0_TWTR_OFFSET 24 +#define ATMEL_MPDDRC_TPR0_TWTR_MASK 0x7 +#define ATMEL_MPDDRC_TPR0_RDC_WRRD_OFFSET 27 +#define ATMEL_MPDDRC_TPR0_RDC_WRRD_MASK 0x1 +#define ATMEL_MPDDRC_TPR0_TMRD_OFFSET 28 +#define ATMEL_MPDDRC_TPR0_TMRD_MASK 0xf + +/* Bit field in timing parameter 1 register */ +#define ATMEL_MPDDRC_TPR1_TRFC_OFFSET 0 +#define ATMEL_MPDDRC_TPR1_TRFC_MASK 0x7f +#define ATMEL_MPDDRC_TPR1_TXSNR_OFFSET 8 +#define ATMEL_MPDDRC_TPR1_TXSNR_MASK 0xff +#define ATMEL_MPDDRC_TPR1_TXSRD_OFFSET 16 +#define ATMEL_MPDDRC_TPR1_TXSRD_MASK 0xff +#define ATMEL_MPDDRC_TPR1_TXP_OFFSET 24 +#define ATMEL_MPDDRC_TPR1_TXP_MASK 0xf + +/* Bit field in timing parameter 2 register */ +#define ATMEL_MPDDRC_TPR2_TXARD_OFFSET 0 +#define ATMEL_MPDDRC_TPR2_TXARD_MASK 0xf +#define ATMEL_MPDDRC_TPR2_TXARDS_OFFSET 4 +#define ATMEL_MPDDRC_TPR2_TXARDS_MASK 0xf +#define ATMEL_MPDDRC_TPR2_TRPA_OFFSET 8 +#define ATMEL_MPDDRC_TPR2_TRPA_MASK 0xf +#define ATMEL_MPDDRC_TPR2_TRTP_OFFSET 12 +#define ATMEL_MPDDRC_TPR2_TRTP_MASK 0x7 +#define ATMEL_MPDDRC_TPR2_TFAW_OFFSET 16 +#define ATMEL_MPDDRC_TPR2_TFAW_MASK 0xf + +/* Bit field in Memory Device Register */ +#define ATMEL_MPDDRC_MD_LPDDR_SDRAM 0x3 +#define ATMEL_MPDDRC_MD_DDR2_SDRAM 0x6 +#define ATMEL_MPDDRC_MD_DBW_MASK (0x1 << 4) +#define ATMEL_MPDDRC_MD_DBW_32_BITS (0x0 << 4) +#define ATMEL_MPDDRC_MD_DBW_16_BITS (0x1 << 4) + +#endif