From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Wed, 20 Nov 2013 22:26:06 +0000 (-0200)
Subject: power: power_fsl: Pass p->bus in the same way for SPI and I2C cases
X-Git-Tag: v2025.01-rc5-pxa1908~15525^2~34
X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-logo.png?a=commitdiff_plain;h=839f4d4e87f40e68de5d57ccff502fe97513d1fa;p=u-boot.git

power: power_fsl: Pass p->bus in the same way for SPI and I2C cases

There is no need to pass p->bus differently when the PMIC is connected via SPI
or via I2C.

Handle the both cases in the same way.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---

diff --git a/drivers/power/power_fsl.c b/drivers/power/power_fsl.c
index ed778f333e..ac0b541d79 100644
--- a/drivers/power/power_fsl.c
+++ b/drivers/power/power_fsl.c
@@ -36,10 +36,10 @@ int pmic_init(unsigned char bus)
 
 	p->name = name;
 	p->number_of_regs = PMIC_NUM_OF_REGS;
+	p->bus = bus;
 
 #if defined(CONFIG_POWER_SPI)
 	p->interface = PMIC_SPI;
-	p->bus = CONFIG_FSL_PMIC_BUS;
 	p->hw.spi.cs = CONFIG_FSL_PMIC_CS;
 	p->hw.spi.clk = CONFIG_FSL_PMIC_CLK;
 	p->hw.spi.mode = CONFIG_FSL_PMIC_MODE;
@@ -50,7 +50,6 @@ int pmic_init(unsigned char bus)
 	p->interface = PMIC_I2C;
 	p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
 	p->hw.i2c.tx_num = FSL_PMIC_I2C_LENGTH;
-	p->bus = bus;
 #else
 #error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C"
 #endif