From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Tue, 28 Feb 2023 18:19:11 +0000 (+0100)
Subject: iot2050: Update firmware layout
X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-logo.png?a=commitdiff_plain;h=6ac9131702768343bec150894daac7208963b440;p=u-boot.git

iot2050: Update firmware layout

The latest version of the binary-only firmware parts come in a combined
form of FSBL and sysfw containers. This implies some layout changes to
the generated firmware image but also makes handling of artifacts much
simpler (4 files less). The env locations will not change, just the
space reserved for U-Boot will shrink from 4 to 3 MB - still plenty of
space left in practice.

Adjust configuration and documentation accordingly.

Along this change, add a new reservation for update commands of the
user-controlled OTP part. A specific userspace tool will fill it, and
the FSBL will evaluate it during boot. This reservation will use 64K of
the former sysfw section.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---

diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
index 4666957686..3ee0842e99 100644
--- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
+++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
@@ -25,15 +25,15 @@
 			missing-msg = "iot2050-seboot";
 		};
 
-		blob@0x080000 {
-			offset = <0x080000>;
+		blob@0x180000 {
+			offset = <0x180000>;
 			filename = "tispl.bin";
 		};
 
-		fit@0x280000 {
+		fit@0x380000 {
 			description = "U-Boot for IOT2050";
 			fit,fdt-list = "of-list";
-			offset = <0x280000>;
+			offset = <0x380000>;
 			images {
 				u-boot {
 					description = "U-Boot";
@@ -94,25 +94,11 @@
 			fill-byte = [00];
 		};
 
-		/* sysfw, basic variant */
-		blob-ext@0x6c0000 {
+		/* OTP update command block */
+		fill@0x6c0000 {
 			offset = <0x6c0000>;
-#ifdef CONFIG_TARGET_IOT2050_A53_PG1
-			filename = "sysfw_sr1.itb";
-#else
-			filename = "sysfw_sr2.itb";
-#endif
-			missing-msg = "iot2050-sysfw";
-		};
-		/* sysfw, advanced variant */
-		blob-ext@0x740000 {
-			offset = <0x740000>;
-#ifdef CONFIG_TARGET_IOT2050_A53_PG1
-			filename = "sysfw_sr1.itb_HS";
-#else
-			filename = "sysfw_sr2.itb_HS";
-#endif
-			missing-msg = "iot2050-sysfw";
+			size   = <0x010000>;
+			fill-byte = [ff];
 		};
 	};
 };
diff --git a/configs/iot2050_pg1_defconfig b/configs/iot2050_pg1_defconfig
index 579971c39c..57a2a6d6f1 100644
--- a/configs/iot2050_pg1_defconfig
+++ b/configs/iot2050_pg1_defconfig
@@ -52,7 +52,7 @@ CONFIG_SPL_POWER_DOMAIN=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x380000
 CONFIG_SYS_MAXARGS=64
 CONFIG_SYS_PBSIZE=1050
 CONFIG_CMD_ASKENV=y
diff --git a/configs/iot2050_pg2_defconfig b/configs/iot2050_pg2_defconfig
index 65400b4696..e3f82ad306 100644
--- a/configs/iot2050_pg2_defconfig
+++ b/configs/iot2050_pg2_defconfig
@@ -54,7 +54,7 @@ CONFIG_SPL_POWER_DOMAIN=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x380000
 CONFIG_SYS_MAXARGS=64
 CONFIG_SYS_PBSIZE=1050
 CONFIG_CMD_ASKENV=y
diff --git a/doc/board/siemens/iot2050.rst b/doc/board/siemens/iot2050.rst
index fd3431fa3f..26972e20ae 100644
--- a/doc/board/siemens/iot2050.rst
+++ b/doc/board/siemens/iot2050.rst
@@ -25,11 +25,7 @@ https://github.com/siemens/meta-iot2050/tree/master/recipes-bsp/u-boot/files/pre
 The following binaries from that source need to be present in the build folder:
 
  - seboot_pg1.bin
- - sysfw_sr1.itb
- - sysfw_sr1.itb_HS
  - seboot_pg2.bin
- - sysfw_sr2.itb
- - sysfw_sr2.itb_HS
 
 Building
 --------
diff --git a/tools/binman/missing-blob-help b/tools/binman/missing-blob-help
index f3a44d08ac..5fdb22c88c 100644
--- a/tools/binman/missing-blob-help
+++ b/tools/binman/missing-blob-help
@@ -21,13 +21,7 @@ Please read the section on SCP firmware in board/sunxi/README.sunxi64
 iot2050-seboot:
 See the documentation for IOT2050 board. Your image is missing SEBoot
 which is mandatory for board startup. Prebuilt SEBoot located at
-meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/tiboot3.bin.
-
-iot2050-sysfw:
-See the documentation for IOT2050 board. Your image is missing system
-firmware which is mandatory for board startup. Prebuilt system firmware
-located at meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/
-with sysfw prefix.
+meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin.
 
 k3-rti-wdt-firmware:
 If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for