From: Tim Harvey Date: Wed, 30 Jun 2021 23:50:08 +0000 (-0700) Subject: net: add support for KSZ9477/KSZ9897/KSZ9567 GbE switch X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-logo.png?a=commitdiff_plain;h=668e205098215acf13f72b892aea9267dc23dd19;p=u-boot.git net: add support for KSZ9477/KSZ9897/KSZ9567 GbE switch The Microchip KSZ9477/KSZ9897/KSZ9567 7-Port Gigabit Ethernet Switches support SGMII/RGMII/MII/RMII with register access via SPI, I2C, or MDIO. This driver currently supports I2C register access but SPI or MDIO register access can be easily added at a later time. Tagging is not implemented and instead the active port is tracked to avoid needing a tag to store port information. This was tested with the imx8mm-venice-gw7901 board which has a KSZ9897S switch with an IMX8MM FEC MAC master connected via RGMII_ID. Signed-off-by: Tim Harvey Reviewed-by: Ramon Fried --- diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 483401681d..726ad36b7c 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -402,6 +402,13 @@ config KS8851_MLL_BASEADDR endif #DM_ETH endif #KS8851_MLL +config KSZ9477 + bool "Microchip KSZ9477 I2C controller driver" + depends on DM_DSA && DM_I2C + help + This driver implements a DSA switch driver for the KSZ9477 family + of GbE switches using the I2C interface. + config MVGBE bool "Marvell Orion5x/Kirkwood network interface support" depends on ARCH_KIRKWOOD || ARCH_ORION5X diff --git a/drivers/net/Makefile b/drivers/net/Makefile index d56baa65b2..03900ffa3a 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_FTMAC110) += ftmac110.o obj-$(CONFIG_FTMAC100) += ftmac100.o obj-$(CONFIG_GMAC_ROCKCHIP) += gmac_rockchip.o obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o +obj-$(CONFIG_KSZ9477) += ksz9477.o obj-$(CONFIG_LAN91C96) += lan91c96.o obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o obj-$(CONFIG_MACB) += macb.o diff --git a/drivers/net/ksz9477.c b/drivers/net/ksz9477.c new file mode 100644 index 0000000000..ed8f1895cb --- /dev/null +++ b/drivers/net/ksz9477.c @@ -0,0 +1,546 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2020 + * Tim Harvey, Gateworks Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Global registers */ + +/* Chip ID */ +#define REG_CHIP_ID0__1 0x0000 + +/* Operation control */ +#define REG_SW_OPERATION 0x0300 +#define SW_RESET BIT(1) +#define SW_START BIT(0) + +/* Port Specific Registers */ +#define PORT_CTRL_ADDR(port, addr) ((addr) | (((port) + 1) << 12)) + +/* Port Control */ +#define REG_PORT_XMII_CTRL_1 0x0301 +#define PORT_MII_NOT_1GBIT BIT(6) +#define PORT_MII_SEL_EDGE BIT(5) +#define PORT_RGMII_ID_IG_ENABLE BIT(4) +#define PORT_RGMII_ID_EG_ENABLE BIT(3) +#define PORT_MII_MAC_MODE BIT(2) +#define PORT_MII_SEL_M 0x3 +#define PORT_RGMII_SEL 0x0 +#define PORT_RMII_SEL 0x1 +#define PORT_GMII_SEL 0x2 +#define PORT_MII_SEL 0x3 + +/* Port MSTP State Register */ +#define REG_PORT_MSTP_STATE 0x0b04 +#define PORT_TX_ENABLE BIT(2) +#define PORT_RX_ENABLE BIT(1) +#define PORT_LEARN_DISABLE BIT(0) + +/* MMD */ +#define REG_PORT_PHY_MMD_SETUP 0x011A +#define PORT_MMD_OP_MODE_M 0x3 +#define PORT_MMD_OP_MODE_S 14 +#define PORT_MMD_OP_INDEX 0 +#define PORT_MMD_OP_DATA_NO_INCR 1 +#define PORT_MMD_OP_DATA_INCR_RW 2 +#define PORT_MMD_OP_DATA_INCR_W 3 +#define PORT_MMD_DEVICE_ID_M 0x1F +#define MMD_SETUP(mode, dev) (((u16)(mode) << PORT_MMD_OP_MODE_S) | (dev)) +#define REG_PORT_PHY_MMD_INDEX_DATA 0x011C + +struct ksz_dsa_priv { + struct udevice *dev; + int active_port; +}; + +static inline int ksz_read8(struct udevice *dev, u32 reg, u8 *val) +{ + int ret = dm_i2c_read(dev, reg, val, 1); + + dev_dbg(dev, "%s 0x%04x<<0x%02x\n", __func__, reg, *val); + + return ret; +} + +static inline int ksz_pread8(struct udevice *dev, int port, int reg, u8 *val) +{ + return ksz_read8(dev, PORT_CTRL_ADDR(port, reg), val); +} + +static inline int ksz_write8(struct udevice *dev, u32 reg, u8 val) +{ + dev_dbg(dev, "%s 0x%04x>>0x%02x\n", __func__, reg, val); + return dm_i2c_write(dev, reg, &val, 1); +} + +static inline int ksz_pwrite8(struct udevice *dev, int port, int reg, u8 val) +{ + return ksz_write8(dev, PORT_CTRL_ADDR(port, reg), val); +} + +static inline int ksz_write16(struct udevice *dev, u32 reg, u16 val) +{ + u8 buf[2]; + + buf[1] = val & 0xff; + buf[0] = val >> 8; + dev_dbg(dev, "%s 0x%04x>>0x%04x\n", __func__, reg, val); + + return dm_i2c_write(dev, reg, buf, 2); +} + +static inline int ksz_pwrite16(struct udevice *dev, int port, int reg, u16 val) +{ + return ksz_write16(dev, PORT_CTRL_ADDR(port, reg), val); +} + +static inline int ksz_read16(struct udevice *dev, u32 reg, u16 *val) +{ + u8 buf[2]; + int ret; + + ret = dm_i2c_read(dev, reg, buf, 2); + *val = (buf[0] << 8) | buf[1]; + dev_dbg(dev, "%s 0x%04x<<0x%04x\n", __func__, reg, *val); + + return ret; +} + +static inline int ksz_pread16(struct udevice *dev, int port, int reg, u16 *val) +{ + return ksz_read16(dev, PORT_CTRL_ADDR(port, reg), val); +} + +static inline int ksz_read32(struct udevice *dev, u32 reg, u32 *val) +{ + return dm_i2c_read(dev, reg, (u8 *)val, 4); +} + +static inline int ksz_pread32(struct udevice *dev, int port, int reg, u32 *val) +{ + return ksz_read32(dev, PORT_CTRL_ADDR(port, reg), val); +} + +static inline int ksz_write32(struct udevice *dev, u32 reg, u32 val) +{ + u8 buf[4]; + + buf[3] = val & 0xff; + buf[2] = (val >> 24) & 0xff; + buf[1] = (val >> 16) & 0xff; + buf[0] = (val >> 8) & 0xff; + dev_dbg(dev, "%s 0x%04x>>0x%04x\n", __func__, reg, val); + + return dm_i2c_write(dev, reg, buf, 4); +} + +static inline int ksz_pwrite32(struct udevice *dev, int port, int reg, u32 val) +{ + return ksz_write32(dev, PORT_CTRL_ADDR(port, reg), val); +} + +static __maybe_unused void ksz_port_mmd_read(struct udevice *dev, int port, + u8 addr, u16 reg, u16 *val) +{ + ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP, MMD_SETUP(PORT_MMD_OP_INDEX, addr)); + ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, reg); + ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP, MMD_SETUP(PORT_MMD_OP_DATA_NO_INCR, addr)); + ksz_pread16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, val); + dev_dbg(dev, "%s P%d 0x%02x:0x%04x<<0x%04x\n", __func__, port + 1, addr, reg, *val); +} + +static void ksz_port_mmd_write(struct udevice *dev, int port, u8 addr, u16 reg, u16 val) +{ + dev_dbg(dev, "%s P%d 0x%02x:0x%04x>>0x%04x\n", __func__, port + 1, addr, addr, val); + ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP, MMD_SETUP(PORT_MMD_OP_INDEX, addr)); + ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, addr); + ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP, MMD_SETUP(PORT_MMD_OP_DATA_NO_INCR, addr)); + ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, val); +} + +/* Apply PHY settings to address errata listed in KSZ9477, KSZ9897, KSZ9896, KSZ9567 + * Silicon Errata and Data Sheet Clarification documents + */ +static void ksz_phy_errata_setup(struct udevice *dev, int port) +{ + dev_dbg(dev, "%s P%d\n", __func__, port + 1); + + /* Register settings are needed to improve PHY receive performance */ + ksz_port_mmd_write(dev, port, 0x01, 0x6f, 0xdd0b); + ksz_port_mmd_write(dev, port, 0x01, 0x8f, 0x6032); + ksz_port_mmd_write(dev, port, 0x01, 0x9d, 0x248c); + ksz_port_mmd_write(dev, port, 0x01, 0x75, 0x0060); + ksz_port_mmd_write(dev, port, 0x01, 0xd3, 0x7777); + ksz_port_mmd_write(dev, port, 0x1c, 0x06, 0x3008); + ksz_port_mmd_write(dev, port, 0x1c, 0x08, 0x2001); + + /* Transmit waveform amplitude can be improved (1000BASE-T, 100BASE-TX, 10BASE-Te) */ + ksz_port_mmd_write(dev, port, 0x1c, 0x04, 0x00d0); + + /* Energy Efficient Ethernet (EEE) feature select must be manually disabled */ + ksz_port_mmd_write(dev, port, 0x07, 0x3c, 0x0000); + + /* Register settings are required to meet data sheet supply current specifications */ + ksz_port_mmd_write(dev, port, 0x1c, 0x13, 0x6eff); + ksz_port_mmd_write(dev, port, 0x1c, 0x14, 0xe6ff); + ksz_port_mmd_write(dev, port, 0x1c, 0x15, 0x6eff); + ksz_port_mmd_write(dev, port, 0x1c, 0x16, 0xe6ff); + ksz_port_mmd_write(dev, port, 0x1c, 0x17, 0x00ff); + ksz_port_mmd_write(dev, port, 0x1c, 0x18, 0x43ff); + ksz_port_mmd_write(dev, port, 0x1c, 0x19, 0xc3ff); + ksz_port_mmd_write(dev, port, 0x1c, 0x1a, 0x6fff); + ksz_port_mmd_write(dev, port, 0x1c, 0x1b, 0x07ff); + ksz_port_mmd_write(dev, port, 0x1c, 0x1c, 0x0fff); + ksz_port_mmd_write(dev, port, 0x1c, 0x1d, 0xe7ff); + ksz_port_mmd_write(dev, port, 0x1c, 0x1e, 0xefff); + ksz_port_mmd_write(dev, port, 0x1c, 0x20, 0xeeee); +} + +/* + * mii bus driver + */ +#define KSZ_MDIO_CHILD_DRV_NAME "ksz_mdio" + +struct ksz_mdio_priv { + struct ksz_dsa_priv *ksz; +}; + +static int dm_ksz_mdio_read(struct udevice *dev, int addr, int devad, int reg) +{ + struct ksz_mdio_priv *priv = dev_get_priv(dev); + struct ksz_dsa_priv *ksz = priv->ksz; + u16 val = 0xffff; + + ksz_pread16(ksz->dev, addr, 0x100 + (reg << 1), &val); + dev_dbg(ksz->dev, "%s P%d reg=0x%04x:0x%04x<<0x%04x\n", __func__, + addr + 1, reg, 0x100 + (reg << 1), val); + + return val; +}; + +static int dm_ksz_mdio_write(struct udevice *dev, int addr, int devad, int reg, u16 val) +{ + struct ksz_mdio_priv *priv = dev_get_priv(dev); + struct ksz_dsa_priv *ksz = priv->ksz; + + dev_dbg(ksz->dev, "%s P%d reg=0x%04x:%04x>>0x%04x\n", + __func__, addr + 1, reg, 0x100 + (reg << 1), val); + ksz_pwrite16(ksz->dev, addr, 0x100 + (reg << 1), val); + + return 0; +} + +static const struct mdio_ops ksz_mdio_ops = { + .read = dm_ksz_mdio_read, + .write = dm_ksz_mdio_write, +}; + +static int ksz_mdio_bind(struct udevice *dev) +{ + char name[16]; + static int num_devices; + + dev_dbg(dev, "%s\n", __func__); + sprintf(name, "ksz-mdio-%d", num_devices++); + device_set_name(dev, name); + + return 0; +} + +static int ksz_mdio_probe(struct udevice *dev) +{ + struct ksz_mdio_priv *priv = dev_get_priv(dev); + + dev_dbg(dev, "%s\n", __func__); + priv->ksz = dev_get_parent_priv(dev->parent); + + return 0; +} + +static const struct udevice_id ksz_mdio_ids[] = { + { .compatible = "microchip,ksz-mdio" }, + { } +}; + +U_BOOT_DRIVER(ksz_mdio) = { + .name = KSZ_MDIO_CHILD_DRV_NAME, + .id = UCLASS_MDIO, + .of_match = ksz_mdio_ids, + .bind = ksz_mdio_bind, + .probe = ksz_mdio_probe, + .ops = &ksz_mdio_ops, + .priv_auto = sizeof(struct ksz_mdio_priv), + .plat_auto = sizeof(struct mdio_perdev_priv), +}; + +static int ksz_port_setup(struct udevice *dev, int port, + phy_interface_t interface) +{ + struct dsa_pdata *pdata = dev_get_uclass_plat(dev); + u8 data8; + + dev_dbg(dev, "%s P%d %s\n", __func__, port + 1, + (port == pdata->cpu_port) ? "cpu" : ""); + + if (port != pdata->cpu_port) { + /* phy port: config errata and leds */ + ksz_phy_errata_setup(dev, port); + } else { + /* cpu port: configure MAC interface mode */ + ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8); + dev_dbg(dev, "%s P%d cpu interface %s\n", __func__, port + 1, + phy_string_for_interface(interface)); + switch (interface) { + case PHY_INTERFACE_MODE_MII: + data8 &= ~PORT_MII_SEL_M; + data8 |= PORT_MII_SEL; + data8 |= PORT_MII_NOT_1GBIT; + break; + case PHY_INTERFACE_MODE_RMII: + data8 &= ~PORT_MII_SEL_M; + data8 |= PORT_RMII_SEL; + data8 |= PORT_MII_NOT_1GBIT; + break; + case PHY_INTERFACE_MODE_GMII: + data8 &= ~PORT_MII_SEL_M; + data8 |= PORT_GMII_SEL; + data8 &= ~PORT_MII_NOT_1GBIT; + break; + default: + data8 &= ~PORT_MII_SEL_M; + data8 |= PORT_RGMII_SEL; + data8 &= ~PORT_MII_NOT_1GBIT; + data8 &= ~PORT_RGMII_ID_IG_ENABLE; + data8 &= ~PORT_RGMII_ID_EG_ENABLE; + if (interface == PHY_INTERFACE_MODE_RGMII_ID || + interface == PHY_INTERFACE_MODE_RGMII_RXID) + data8 |= PORT_RGMII_ID_IG_ENABLE; + if (interface == PHY_INTERFACE_MODE_RGMII_ID || + interface == PHY_INTERFACE_MODE_RGMII_TXID) + data8 |= PORT_RGMII_ID_EG_ENABLE; + break; + } + ksz_write8(dev, PORT_CTRL_ADDR(port, REG_PORT_XMII_CTRL_1), data8); + } + + return 0; +} + +static int ksz_port_enable(struct udevice *dev, int port, struct phy_device *phy) +{ + struct dsa_pdata *pdata = dev_get_uclass_plat(dev); + struct ksz_dsa_priv *priv = dev_get_priv(dev); + int supported = PHY_GBIT_FEATURES; + u8 data8; + int ret; + + dev_dbg(dev, "%s P%d 0x%x %s\n", __func__, port + 1, phy->phy_id, + phy_string_for_interface(phy->interface)); + + /* setup this port */ + ret = ksz_port_setup(dev, port, phy->interface); + if (ret) { + dev_err(dev, "port setup failed: %d\n", ret); + return ret; + } + + /* enable port forwarding for this port */ + ksz_pread8(priv->dev, port, REG_PORT_MSTP_STATE, &data8); + data8 &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); + data8 |= (PORT_TX_ENABLE | PORT_RX_ENABLE); + ksz_pwrite8(priv->dev, port, REG_PORT_MSTP_STATE, data8); + + /* if cpu master we are done */ + if (port == pdata->cpu_port) + return 0; + + /* configure phy */ + phy->supported &= supported; + phy->advertising &= supported; + ret = phy_config(phy); + if (ret) + return ret; + + ret = phy_startup(phy); + if (ret) + return ret; + + /* start switch */ + ksz_read8(priv->dev, REG_SW_OPERATION, &data8); + data8 |= SW_START; + ksz_write8(priv->dev, REG_SW_OPERATION, data8); + + /* keep track of current enabled non-cpu port */ + priv->active_port = port; + + return 0; +} + +static void ksz_port_disable(struct udevice *dev, int port, struct phy_device *phy) +{ + struct dsa_pdata *pdata = dev_get_uclass_plat(dev); + struct ksz_dsa_priv *priv = dev_get_priv(dev); + u8 data8; + + dev_dbg(dev, "%s P%d 0x%x\n", __func__, port + 1, phy->phy_id); + + /* can't disable CPU port without re-configuring/re-starting switch */ + if (port == pdata->cpu_port) + return; + + /* disable port */ + ksz_pread8(priv->dev, port, REG_PORT_MSTP_STATE, &data8); + data8 &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); + data8 |= PORT_LEARN_DISABLE; + ksz_pwrite8(priv->dev, port, REG_PORT_MSTP_STATE, data8); + + /* + * we don't call phy_shutdown here to avoid waiting next time we use + * the port, but the downside is that remote side will think we're + * actively processing traffic although we are not. + */ +} + +static int ksz_xmit(struct udevice *dev, int port, void *packet, int length) +{ + dev_dbg(dev, "%s P%d %d\n", __func__, port + 1, length); + + return 0; +} + +static int ksz_recv(struct udevice *dev, int *port, void *packet, int length) +{ + struct ksz_dsa_priv *priv = dev_get_priv(dev); + + dev_dbg(dev, "%s P%d %d\n", __func__, priv->active_port + 1, length); + *port = priv->active_port; + + return 0; +}; + +static const struct dsa_ops ksz_dsa_ops = { + .port_enable = ksz_port_enable, + .port_disable = ksz_port_disable, + .xmit = ksz_xmit, + .rcv = ksz_recv, +}; + +static int ksz_probe_mdio(struct udevice *dev) +{ + ofnode node, mdios; + int ret; + + mdios = dev_read_subnode(dev, "mdios"); + if (ofnode_valid(mdios)) { + ofnode_for_each_subnode(node, mdios) { + const char *name = ofnode_get_name(node); + struct udevice *pdev; + + ret = device_bind_driver_to_node(dev, + KSZ_MDIO_CHILD_DRV_NAME, + name, node, &pdev); + if (ret) + dev_err(dev, "failed to probe %s: %d\n", name, ret); + } + } + + return 0; +} + +/* + * I2C driver + */ +static int ksz_i2c_probe(struct udevice *dev) +{ + struct dsa_pdata *pdata = dev_get_uclass_plat(dev); + struct ksz_dsa_priv *priv = dev_get_priv(dev); + struct udevice *master = dsa_get_master(dev); + int i, ret; + u8 data8; + u32 id; + + if (!master) + return -ENODEV; + + dev_dbg(dev, "%s %s master:%s\n", __func__, dev->name, master->name); + dev_set_parent_priv(dev, priv); + + ret = i2c_set_chip_offset_len(dev, 2); + if (ret) { + printf("i2c_set_chip_offset_len failed: %d\n", ret); + return ret; + } + + /* default config */ + priv->dev = dev; + + /* chip level reset */ + ksz_read8(priv->dev, REG_SW_OPERATION, &data8); + data8 |= SW_RESET; + ksz_write8(priv->dev, REG_SW_OPERATION, data8); + + /* read chip id */ + ret = ksz_read32(dev, REG_CHIP_ID0__1, &id); + if (ret) + return ret; + id = __swab32(id); + dev_dbg(dev, "%s id=0x%08x\n", __func__, id); + switch (id & 0xffffff00) { + case 0x00947700: + puts("KSZ9477S: "); + break; + case 0x00956700: + puts("KSZ9567R: "); + break; + case 0x00989700: + puts("KSZ9897S: "); + break; + default: + dev_err(dev, "invalid chip id: 0x%08x\n", id); + return -EINVAL; + } + + /* probe mdio bus */ + ret = ksz_probe_mdio(dev); + if (ret) + return ret; + + /* disable ports by default */ + for (i = 0; i < pdata->num_ports; i++) { + ksz_pread8(priv->dev, i, REG_PORT_MSTP_STATE, &data8); + data8 &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); + ksz_pwrite8(priv->dev, i, REG_PORT_MSTP_STATE, data8); + } + + dsa_set_tagging(dev, 0, 0); + + return 0; +}; + +static const struct udevice_id ksz_i2c_ids[] = { + { .compatible = "microchip,ksz9897" }, + { .compatible = "microchip,ksz9477" }, + { .compatible = "microchip,ksz9567" }, + { } +}; + +U_BOOT_DRIVER(ksz) = { + .name = "ksz-switch", + .id = UCLASS_DSA, + .of_match = ksz_i2c_ids, + .probe = ksz_i2c_probe, + .ops = &ksz_dsa_ops, + .priv_auto = sizeof(struct ksz_dsa_priv), +};