From: Urja Rannikko <urjaman@gmail.com>
Date: Fri, 22 Mar 2019 19:14:34 +0000 (+0000)
Subject: rk3288-board: remove pinctrl call for debug uart
X-Git-Tag: v2025.01-rc5-pxa1908~3009^2~17
X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-logo.png?a=commitdiff_plain;h=59ef021b995bcc30f3d5d8b0be2a504f81fe8b31;p=u-boot.git

rk3288-board: remove pinctrl call for debug uart

This failed and caused a boot failure on c201, and afaik
the pins should be setup by the new pinctrl driver.

Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
---

diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c
index 9c4f7f219f..f5df44dab1 100644
--- a/arch/arm/mach-rockchip/rk3288-board.c
+++ b/arch/arm/mach-rockchip/rk3288-board.c
@@ -321,7 +321,6 @@ int board_early_init_f(void)
 {
 	const uintptr_t GRF_SOC_CON0 = 0xff770244;
 	const uintptr_t GRF_SOC_CON2 = 0xff77024c;
-	struct udevice *pinctrl;
 	struct udevice *dev;
 	int ret;
 
@@ -335,18 +334,7 @@ int board_early_init_f(void)
 		debug("CLK init failed: %d\n", ret);
 		return ret;
 	}
-	ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
-	if (ret) {
-		debug("%s: Cannot find pinctrl device\n", __func__);
-		return ret;
-	}
 
-	/* Enable debug UART */
-	ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG);
-	if (ret) {
-		debug("%s: Failed to set up console UART\n", __func__);
-		return ret;
-	}
 	rk_setreg(GRF_SOC_CON2, 1 << 0);
 
 	/*