From: Priyanka Jain <Priyanka.Jain@freescale.com>
Date: Mon, 8 Sep 2014 07:50:52 +0000 (+0530)
Subject: board/t1040qds: Add sgmii ports support in 0xA7 protocol
X-Git-Tag: v2025.01-rc5-pxa1908~14598^2~1
X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-logo.png?a=commitdiff_plain;h=5273aa3834ec68616e173ceac91cdcf60dba2868;p=u-boot.git

board/t1040qds: Add sgmii ports support in 0xA7 protocol

T1042QDS (T1042 is T1040 Personality without L2 switch) supports following
sgmii interfaces with serdes protocol 0xA7
-SGMII-MAC3 on Lane B - slot 7
-SGMII-MAC5 on Lane H - slot 7
-SGMII2.5G-MAC1 on Lane C - slot 6
-SGMII2.5G-MAC2 on Lane D - slot 5

Add support of above sgmii interfaces

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
---

diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c
index 1929bba20b..06d908658d 100644
--- a/board/freescale/t1040qds/eth.c
+++ b/board/freescale/t1040qds/eth.c
@@ -241,6 +241,8 @@ static void initialize_lane_to_slot(void)
 		break;
 	case 0xA7:
 		lane_to_slot[1] = 7;
+		lane_to_slot[2] = 6;
+		lane_to_slot[3] = 5;
 		lane_to_slot[7] = 7;
 		break;
 	case 0xAA:
@@ -410,6 +412,8 @@ void t1040_handle_phy_interface_sgmii(int i)
 			fm_info_set_phy_address(i, riser_phy_addr[1]);
 		if (FM1_DTSEC3 == i)
 			fm_info_set_phy_address(i, riser_phy_addr[2]);
+		if (FM1_DTSEC5 == i)
+			fm_info_set_phy_address(i, riser_phy_addr[3]);
 
 		mdio_mux[i] = EMI1_SLOT7;
 		fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c
index bcc871d842..4cce46d7f8 100644
--- a/drivers/net/fm/t1040.c
+++ b/drivers/net/fm/t1040.c
@@ -49,8 +49,6 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 		else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
 				FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII)
 			return PHY_INTERFACE_MODE_MII;
-		else
-			return PHY_INTERFACE_MODE_NONE;
 	}
 
 	switch (port) {