From: Tom Rini Date: Mon, 20 Jun 2022 12:07:58 +0000 (-0400) Subject: Convert CONFIG_KIRKWOOD_PCIE_INIT et al to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-logo.png?a=commitdiff_plain;h=432243cee100e1d8f60399f0ae8f76cf7c83975f;p=u-boot.git Convert CONFIG_KIRKWOOD_PCIE_INIT et al to Kconfig This converts the following to Kconfig: CONFIG_KIRKWOOD_EGIGA_INIT CONFIG_KIRKWOOD_PCIE_INIT CONFIG_KIRKWOOD_RGMII_PAD_1V8 CONFIG_KM_DISABLE_PCIE Signed-off-by: Tom Rini --- diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index ca2da003b6..98bb10c2de 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -121,6 +121,18 @@ endchoice config SYS_SOC default "kirkwood" +config KIRKWOOD_RGMII_PAD_1V8 + bool "Configures the I/O voltage of the pads connected gigabit interface to 1.8V" + default y + +config KIRKWOOD_EGIGA_INIT + bool "Enable GbePort0/1 for kernel" + default y + +config KIRKWOOD_PCIE_INIT + bool "Enable PCIe Port0 for kernel" + default y + source "board/Marvell/openrd/Kconfig" source "board/Marvell/dreamplug/Kconfig" source "board/Synology/ds109/Kconfig" diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index ca34157054..90e86ab99b 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -23,9 +23,6 @@ #endif /* CONFIG_KW88F6281 */ #include -#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ -#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ -#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 for kernel */ #define CONFIG_I2C_MVTWSI_BASE0 KW_TWSI_BASE #define MV_UART_CONSOLE_BASE KW_UART0_BASE diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig index 1d8ae5876b..655759b09c 100644 --- a/configs/km_kirkwood_128m16_defconfig +++ b/configs/km_kirkwood_128m16_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage_128M16_1.cfg" CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_TARGET_KM_KIRKWOOD=y +# CONFIG_KIRKWOOD_PCIE_INIT is not set CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x0 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood" diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig index d2f2ff4e23..65378d3cec 100644 --- a/configs/km_kirkwood_defconfig +++ b/configs/km_kirkwood_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_TARGET_KM_KIRKWOOD=y +# CONFIG_KIRKWOOD_PCIE_INIT is not set CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x0 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood" diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig index 9654b8d806..8b54f9c7c8 100644 --- a/configs/kmcoge5un_defconfig +++ b/configs/kmcoge5un_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage_256M8_1.cfg" CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_TARGET_KM_KIRKWOOD=y +# CONFIG_KIRKWOOD_PCIE_INIT is not set CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xC0000 CONFIG_ENV_SECT_SIZE=0x10000 diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index 8114373655..e42e6d5653 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -9,10 +9,6 @@ /* additions for new ARM relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ -#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ -#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ - /* * NS16550 Configuration */ diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h index b70829c09d..8926c26b0b 100644 --- a/include/configs/SBx81LIFXCAT.h +++ b/include/configs/SBx81LIFXCAT.h @@ -9,10 +9,6 @@ /* additions for new ARM relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ -#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ -#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ - /* * NS16550 Configuration */ diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index e58a69501b..01482d5319 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -23,7 +23,6 @@ /* KM_KIRKWOOD */ #if defined(CONFIG_KM_KIRKWOOD) #define CONFIG_HOSTNAME "km_kirkwood" -#define CONFIG_KM_DISABLE_PCIE /* KM_KIRKWOOD_PCI */ #elif defined(CONFIG_KM_KIRKWOOD_PCI) @@ -34,7 +33,6 @@ /* KM_KIRKWOOD_128M16 */ #elif defined(CONFIG_KM_KIRKWOOD_128M16) #define CONFIG_HOSTNAME "km_kirkwood_128m16" -#define CONFIG_KM_DISABLE_PCIE /* KM_NUSA */ #elif defined(CONFIG_KM_NUSA) @@ -44,7 +42,6 @@ /* KMCOGE5UN */ #elif defined(CONFIG_KM_COGE5UN) #define CONFIG_HOSTNAME "kmcoge5un" -#define CONFIG_KM_DISABLE_PCIE /* KM_SUSE2 */ #elif defined(CONFIG_KM_SUSE2) @@ -118,8 +115,4 @@ MVGBE_SET_MII_SPEED_TO_100) #endif -#ifdef CONFIG_KM_DISABLE_PCIE -#undef CONFIG_KIRKWOOD_PCIE_INIT -#endif - #endif /* _CONFIG_KM_KIRKWOOD */