From: Bryan Brattlof <bb@ti.com>
Date: Fri, 29 Dec 2023 17:47:23 +0000 (-0600)
Subject: arm: dts: k3-am654: convert bootph-pre-ram to bootph-all
X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-logo.png?a=commitdiff_plain;h=37a1a4074b83fbd8504ac446fdee300a88e35551;p=u-boot.git

arm: dts: k3-am654: convert bootph-pre-ram to bootph-all

Many nodes are reused between WKUP SPL, MAIN SPL, and U-Boot. Using
bootph-pre-ram is causing these nodes to be present in SPL builds but
pruned away during the U-Boot build. Convert these nodes to bootph-all
so they will remain no matter which dtb build is happening.

Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
---

diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index da6d4dffbf..4fd188fa19 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -18,151 +18,151 @@
 };
 
 &vtt_supply {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &cbass_main {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_navss {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &cbass_mcu {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &mcu_navss {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &mcu_ringacc {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &mcu_udmap {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &wkup_gpio0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &secure_proxy_main {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &cbass_wakeup {
-	bootph-pre-ram;
+	bootph-all;
 
 	chipid@43000014 {
-		bootph-pre-ram;
+		bootph-all;
 	};
 };
 
 &dmsc {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &k3_pds {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &k3_clks {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &k3_reset {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_uart0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &wkup_vtm0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &wkup_pmx0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &wkup_uart0_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &ddr_vtt_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &mcu_uart0_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &wkup_i2c0_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &mcu_fss0_ospi0_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_pmx0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_uart0_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_mmc0_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_mmc1_pins_default {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &main_pmx1 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &sdhci0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &sdhci1 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &wkup_i2c0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &vdd_mpu {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &ospi0 {
-	bootph-pre-ram;
+	bootph-all;
 
 	flash@0 {
-		bootph-pre-ram;
+		bootph-all;
 	};
 };
 
 &dwc3_0 {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &scm_conf {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &fss {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &pru0_0 {