From: Masahiro Yamada Date: Fri, 30 May 2014 08:45:02 +0000 (+0900) Subject: powerpc: kvme080: remove orphan board X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-logo.png?a=commitdiff_plain;h=2868f8625f0bdd8dda6895b119d09a43d1f10c82;p=u-boot.git powerpc: kvme080: remove orphan board This board has been orphan for a while. (Emails to its maintainer have been bouncing.) Because MPC82xx family is old enough, nobody would pick up the maintainership on it. Signed-off-by: Masahiro Yamada Cc: Wolfgang Denx --- diff --git a/board/etin/kvme080/Makefile b/board/etin/kvme080/Makefile deleted file mode 100644 index d1b6f30440..0000000000 --- a/board/etin/kvme080/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = kvme080.o multiverse.o diff --git a/board/etin/kvme080/kvme080.c b/board/etin/kvme080/kvme080.c deleted file mode 100644 index baf4cbc4da..0000000000 --- a/board/etin/kvme080/kvme080.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * (C) Copyright 2005 - * Sangmoon Kim, Etin Systems. dogoil@etinsys.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include - -int checkboard(void) -{ - puts ("Board: KVME080\n"); - return 0; -} - -unsigned long setdram(int m, int row, int col, int bank) -{ - int i; - unsigned long start, end; - uint32_t mccr1; - uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0; - uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0; - uint8_t mber = 0; - - CONFIG_READ_WORD(MCCR1, mccr1); - mccr1 &= 0xffff0000; - - start = CONFIG_SYS_SDRAM_BASE; - end = start + (1 << (col + row + 3) ) * bank - 1; - - for (i = 0; i < m; i++) { - mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2; - if (i < 4) { - msar1 |= ((start >> 20) & 0xff) << i * 8; - emsar1 |= ((start >> 28) & 0xff) << i * 8; - mear1 |= ((end >> 20) & 0xff) << i * 8; - emear1 |= ((end >> 28) & 0xff) << i * 8; - } else { - msar2 |= ((start >> 20) & 0xff) << (i-4) * 8; - emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8; - mear2 |= ((end >> 20) & 0xff) << (i-4) * 8; - emear2 |= ((end >> 28) & 0xff) << (i-4) * 8; - } - mber |= 1 << i; - start += (1 << (col + row + 3) ) * bank; - end += (1 << (col + row + 3) ) * bank; - } - for (; i < 8; i++) { - if (i < 4) { - msar1 |= 0xff << i * 8; - emsar1 |= 0x30 << i * 8; - mear1 |= 0xff << i * 8; - emear1 |= 0x30 << i * 8; - } else { - msar2 |= 0xff << (i-4) * 8; - emsar2 |= 0x30 << (i-4) * 8; - mear2 |= 0xff << (i-4) * 8; - emear2 |= 0x30 << (i-4) * 8; - } - } - - CONFIG_WRITE_WORD(MCCR1, mccr1); - CONFIG_WRITE_WORD(MSAR1, msar1); - CONFIG_WRITE_WORD(EMSAR1, emsar1); - CONFIG_WRITE_WORD(MEAR1, mear1); - CONFIG_WRITE_WORD(EMEAR1, emear1); - CONFIG_WRITE_WORD(MSAR2, msar2); - CONFIG_WRITE_WORD(EMSAR2, emsar2); - CONFIG_WRITE_WORD(MEAR2, mear2); - CONFIG_WRITE_WORD(EMEAR2, emear2); - CONFIG_WRITE_BYTE(MBER, mber); - - return (1 << (col + row + 3) ) * bank * m; -} - -phys_size_t initdram(int board_type) -{ - unsigned int msr; - long int size = 0; - - msr = mfmsr(); - mtmsr(msr & ~(MSR_IR | MSR_DR)); - mtspr(IBAT2L, CONFIG_SYS_IBAT0L + 0x10000000); - mtspr(IBAT2U, CONFIG_SYS_IBAT0U + 0x10000000); - mtspr(DBAT2L, CONFIG_SYS_DBAT0L + 0x10000000); - mtspr(DBAT2U, CONFIG_SYS_DBAT0U + 0x10000000); - mtmsr(msr); - - if (setdram(2,13,10,4) == get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x20000000)) - size = 0x20000000; /* 512MB */ - else if (setdram(1,13,10,4) == get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x10000000)) - size = 0x10000000; /* 256MB */ - else if (setdram(2,13,9,4) == get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x10000000)) - size = 0x10000000; /* 256MB */ - else if (setdram(1,13,9,4) == get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x08000000)) - size = 0x08000000; /* 128MB */ - else if (setdram(2,12,9,4) == get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x08000000)) - size = 0x08000000; /* 128MB */ - else if (setdram(1,12,9,4) == get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x04000000)) - size = 0x04000000; /* 64MB */ - - msr = mfmsr(); - mtmsr(msr & ~(MSR_IR | MSR_DR)); - mtspr(IBAT2L, CONFIG_SYS_IBAT2L); - mtspr(IBAT2U, CONFIG_SYS_IBAT2U); - mtspr(DBAT2L, CONFIG_SYS_DBAT2L); - mtspr(DBAT2U, CONFIG_SYS_DBAT2U); - mtmsr(msr); - - return size; -} - -struct pci_controller hose; - -void pci_init_board(void) -{ - pci_mpc824x_init(&hose); -} - -int board_early_init_f(void) -{ - *(volatile unsigned char *)(0xff080120) = 0xfb; - - return 0; -} - -int board_early_init_r(void) -{ - unsigned int msr; - - CONFIG_WRITE_WORD(ERCR1, 0x95ff8000); - CONFIG_WRITE_WORD(ERCR3, 0x0c00000e); - CONFIG_WRITE_WORD(ERCR4, 0x0800000e); - - msr = mfmsr(); - mtmsr(msr & ~(MSR_IR | MSR_DR)); - mtspr(IBAT1L, 0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT); - mtspr(IBAT1U, 0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP); - mtspr(DBAT1L, 0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT); - mtspr(DBAT1U, 0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP); - mtmsr(msr); - - return 0; -} - -extern int multiverse_init(void); - -int misc_init_r(void) -{ - multiverse_init(); - return 0; -} - -void *nvram_read(void *dest, const long src, size_t count) -{ - volatile uchar *d = (volatile uchar*) dest; - volatile uchar *s = (volatile uchar*) src; - while(count--) { - *d++ = *s++; - asm volatile("sync"); - } - return dest; -} - -void nvram_write(long dest, const void *src, size_t count) -{ - volatile uchar *d = (volatile uchar*)dest; - volatile uchar *s = (volatile uchar*)src; - while(count--) { - *d++ = *s++; - asm volatile("sync"); - } -} - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} diff --git a/board/etin/kvme080/multiverse.c b/board/etin/kvme080/multiverse.c deleted file mode 100644 index 2bcfe2ea04..0000000000 --- a/board/etin/kvme080/multiverse.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * multiverse.c - * - * VME driver for Multiverse - * - * Author : Sangmoon Kim - * dogoil@etinsys.com - * - * Copyright 2005 ETIN SYSTEMS Co.,Ltd. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#include "multiverse.h" - -static unsigned long vme_asi_addr; -static unsigned long vme_iack_addr; -static unsigned long pci_reg_addr; -static unsigned long vme_reg_addr; - -int multiv_reset(unsigned long base) -{ - writeb(0x09, base + VME_SLAVE32_AM); - writeb(0x39, base + VME_SLAVE24_AM); - writeb(0x29, base + VME_SLAVE16_AM); - writeb(0x2f, base + VME_SLAVE_REG_AM); - writeb((VME_A32_SLV_BUS >> 24) & 0xff, base + VME_SLAVE32_A); - writeb((VME_A24_SLV_BUS >> 16) & 0xff, base + VME_SLAVE24_A); - writeb((VME_A16_SLV_BUS >> 8 ) & 0xff, base + VME_SLAVE16_A); -#ifdef A32_SLV_WINDOW - if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) { - writeb(((~(VME_A32_SLV_SIZE-1)) >> 24) & 0xff, - base + VME_SLAVE32_MASK); - writeb(0x01, base + VME_SLAVE32_EN); - } else { - writeb(0xff, base + VME_SLAVE32_MASK); - writeb(0x00, base + VME_SLAVE32_EN); - } -#else - writeb(0xff, base + VME_SLAVE32_MASK); - writeb(0x00, base + VME_SLAVE32_EN); -#endif -#ifdef A24_SLV_WINDOW - if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) { - writeb(((~(VME_A24_SLV_SIZE-1)) >> 16) & 0xff, - base + VME_SLAVE24_MASK); - writeb(0x01, base + VME_SLAVE24_EN); - } else { - writeb(0xff, base + VME_SLAVE24_MASK); - writeb(0x00, base + VME_SLAVE24_EN); - } -#else - writeb(0xff, base + VME_SLAVE24_MASK); - writeb(0x00, base + VME_SLAVE24_EN); -#endif -#ifdef A16_SLV_WINDOW - if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) { - writeb(((~(VME_A16_SLV_SIZE-1)) >> 8) & 0xff, - base + VME_SLAVE16_MASK); - writeb(0x01, base + VME_SLAVE16_EN); - } else { - writeb(0xff, base + VME_SLAVE16_MASK); - writeb(0x00, base + VME_SLAVE16_EN); - } -#else - writeb(0xff, base + VME_SLAVE16_MASK); - writeb(0x00, base + VME_SLAVE16_EN); -#endif -#ifdef REG_SLV_WINDOW - if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) { - writeb(((~(VME_REG_SLV_SIZE-1)) >> 16) & 0xff, - base + VME_SLAVE_REG_MASK); - writeb(0x01, base + VME_SLAVE_REG_EN); - } else { - writeb(0xf8, base + VME_SLAVE_REG_MASK); - } -#else - writeb(0xf8, base + VME_SLAVE_REG_MASK); -#endif - writeb(0x09, base + VME_MASTER32_AM); - writeb(0x39, base + VME_MASTER24_AM); - writeb(0x29, base + VME_MASTER16_AM); - writeb(0x2f, base + VME_MASTER_REG_AM); - writel(0x00000000, base + VME_RMW_ADRS); - writeb(0x00, base + VME_IRQ); - writeb(0x00, base + VME_INT_EN); - writel(0x00000000, base + VME_IRQ1_REG); - writel(0x00000000, base + VME_IRQ2_REG); - writel(0x00000000, base + VME_IRQ3_REG); - writel(0x00000000, base + VME_IRQ4_REG); - writel(0x00000000, base + VME_IRQ5_REG); - writel(0x00000000, base + VME_IRQ6_REG); - writel(0x00000000, base + VME_IRQ7_REG); - return 0; -} - -void multiv_auto_slot_id(unsigned long base) -{ - __maybe_unused unsigned int vector; - int slot_id = 1; - if (readb(base + VME_CTRL) & VME_CTRL_SYSFAIL) { - *(volatile unsigned int*)(base + VME_IRQ2_REG) = 0xfe; - writeb(readb(base + VME_IRQ) | 0x04, base + VME_IRQ); - writeb(readb(base + VME_CTRL) & ~VME_CTRL_SYSFAIL, - base + VME_CTRL); - while (readb(base + VME_STATUS) & VME_STATUS_SYSFAIL); - if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) { - while (readb(base + VME_INT) & 0x04) { - vector = *(volatile unsigned int*) - (vme_iack_addr + VME_IACK2); - *(unsigned char*)(vme_asi_addr + 0x7ffff) - = (slot_id << 3) & 0xff; - slot_id ++; - if (slot_id > 31) - break; - } - } - } -} - -int multiverse_init(void) -{ - int i; - pci_dev_t pdev; - unsigned int bar[6]; - - pdev = pci_find_device(0x1895, 0x0001, 0); - - if (pdev == 0) - return -1; - - for (i = 0; i < 6; i++) - pci_read_config_dword (pdev, - PCI_BASE_ADDRESS_0 + i * 4, &bar[i]); - - pci_reg_addr = bar[0]; - vme_reg_addr = bar[1] + 0x00F00000; - vme_iack_addr = bar[1] + 0x00200000; - vme_asi_addr = bar[3]; - - pci_write_config_dword (pdev, PCI_COMMAND, - PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - - writel(0xFF000000, pci_reg_addr + P_TA1); - writel(0x04, pci_reg_addr + P_IMG_CTRL1); - writel(0xf0000000, pci_reg_addr + P_TA2); - writel(0x04, pci_reg_addr + P_IMG_CTRL2); - writel(0xF1000000, pci_reg_addr + P_TA3); - writel(0x04, pci_reg_addr + P_IMG_CTRL3); - writel(VME_A32_MSTR_BUS, pci_reg_addr + P_TA5); - writel(~(VME_A32_MSTR_SIZE-1), pci_reg_addr + P_AM5); - writel(0x04, pci_reg_addr + P_IMG_CTRL5); - - writel(VME_A32_SLV_BUS, pci_reg_addr + W_BA1); - writel(~(VME_A32_SLV_SIZE-1), pci_reg_addr + W_AM1); - writel(VME_A32_SLV_LOCAL, pci_reg_addr + W_TA1); - writel(0x04, pci_reg_addr + W_IMG_CTRL1); - - writel(0xF0000000, pci_reg_addr + W_BA2); - writel(0xFF000000, pci_reg_addr + W_AM2); - writel(VME_A24_SLV_LOCAL, pci_reg_addr + W_TA2); - writel(0x04, pci_reg_addr + W_IMG_CTRL2); - - writel(0xFF000000, pci_reg_addr + W_BA3); - writel(0xFF000000, pci_reg_addr + W_AM3); - writel(VME_A16_SLV_LOCAL, pci_reg_addr + W_TA3); - writel(0x04, pci_reg_addr + W_IMG_CTRL3); - - writel(0x00000001, pci_reg_addr + W_ERR_CS); - writel(0x00000001, pci_reg_addr + P_ERR_CS); - - multiv_reset(vme_reg_addr); - writeb(readb(vme_reg_addr + VME_CTRL) | VME_CTRL_SHORT_D, - vme_reg_addr + VME_CTRL); - - multiv_auto_slot_id(vme_reg_addr); - - return 0; -} diff --git a/board/etin/kvme080/multiverse.h b/board/etin/kvme080/multiverse.h deleted file mode 100644 index b3b79b7ee3..0000000000 --- a/board/etin/kvme080/multiverse.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * multiverse.h - * - * VME driver for Multiverse - * - * Author : Sangmoon Kim - * dogoil@etinsys.com - * - * Copyright 2005 ETIN SYSTEMS Co.,Ltd. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __MULTIVERSE_H__ -#define __MULTIVERSE_H__ - -#define VME_A32_MSTR_BUS 0x90000000 -#define VME_A32_MSTR_SIZE 0x01000000 - -#define VME_A32_SLV_SIZE 0x01000000 - -#define VME_A32_SLV_BUS 0x90000000 -#define VME_A24_SLV_BUS 0x00000000 -#define VME_A16_SLV_BUS 0x00000000 - -#define VME_A32_SLV_LOCAL 0x00000000 -#define VME_A24_SLV_LOCAL 0x00000000 -#define VME_A16_SLV_LOCAL 0x00000000 - -#define A32_SLV_WINDOW -#undef A24_SLV_WINDOW -#undef A16_SLV_WINDOW -#undef REG_SLV_WINDOW - -/* PCI Registers */ - -#define P_IMG_CTRL0 0x100 -#define P_BA0 0x104 -#define P_AM0 0x108 -#define P_TA0 0x10C -#define P_IMG_CTRL1 0x110 -#define P_BA1 0x114 -#define P_AM1 0x118 -#define P_TA1 0x11C -#define P_IMG_CTRL2 0x120 -#define P_BA2 0x124 -#define P_AM2 0x128 -#define P_TA2 0x12C -#define P_IMG_CTRL3 0x130 -#define P_BA3 0x134 -#define P_AM3 0x138 -#define P_TA3 0x13C -#define P_IMG_CTRL4 0x140 -#define P_BA4 0x144 -#define P_AM4 0x148 -#define P_TA4 0x14C -#define P_IMG_CTRL5 0x150 -#define P_BA5 0x154 -#define P_AM5 0x158 -#define P_TA5 0x15C -#define P_ERR_CS 0x160 -#define P_ERR_ADDR 0x164 -#define P_ERR_DATA 0x168 - -#define WB_CONF_SPC_BAR 0x180 -#define W_IMG_CTRL1 0x184 -#define W_BA1 0x188 -#define W_AM1 0x18C -#define W_TA1 0x190 -#define W_IMG_CTRL2 0x194 -#define W_BA2 0x198 -#define W_AM2 0x19C -#define W_TA2 0x1A0 -#define W_IMG_CTRL3 0x1A4 -#define W_BA3 0x1A8 -#define W_AM3 0x1AC -#define W_TA3 0x1B0 -#define W_IMG_CTRL4 0x1B4 -#define W_BA4 0x1B8 -#define W_AM4 0x1BC -#define W_TA4 0x1C0 -#define W_IMG_CTRL5 0x1C4 -#define W_BA5 0x1C8 -#define W_AM5 0x1CC -#define W_TA5 0x1D0 -#define W_ERR_CS 0x1D4 -#define W_ERR_ADDR 0x1D8 -#define W_ERR_DATA 0x1DC -#define CNF_ADDR 0x1E0 -#define CNF_DATA 0x1E4 -#define INT_ACK 0x1E8 -#define ICR 0x1EC -#define ISR 0x1F0 - -/* VME registers */ - -#define VME_SLAVE32_AM 0x03 -#define VME_SLAVE24_AM 0x02 -#define VME_SLAVE16_AM 0x01 -#define VME_SLAVE_REG_AM 0x00 -#define VME_SLAVE32_A 0x07 -#define VME_SLAVE24_A 0x06 -#define VME_SLAVE16_A 0x05 -#define VME_SLAVE_REG_A 0x04 -#define VME_SLAVE32_MASK 0x0B -#define VME_SLAVE24_MASK 0x0A -#define VME_SLAVE16_MASK 0x09 -#define VME_SLAVE_REG_MASK 0x08 -#define VME_SLAVE32_EN 0x0F -#define VME_SLAVE24_EN 0x0E -#define VME_SLAVE16_EN 0x0D -#define VME_SLAVE_REG_EN 0x0C -#define VME_MASTER32_AM 0x13 -#define VME_MASTER24_AM 0x12 -#define VME_MASTER16_AM 0x11 -#define VME_MASTER_REG_AM 0x10 -#define VME_RMW_ADRS 0x14 -#define VME_MBOX 0x18 -#define VME_STATUS 0x1E -#define VME_CTRL 0x1C -#define VME_IRQ 0x20 -#define VME_INT_EN 0x21 -#define VME_INT 0x22 -#define VME_IRQ1_REG 0x24 -#define VME_IRQ2_REG 0x28 -#define VME_IRQ3_REG 0x2C -#define VME_IRQ4_REG 0x30 -#define VME_IRQ5_REG 0x34 -#define VME_IRQ6_REG 0x38 -#define VME_IRQ7_REG 0x3C - -/* VME control register */ - -#define VME_CTRL_BRDRST 0x01 -#define VME_CTRL_SYSRST 0x02 -#define VME_CTRL_RMW 0x04 -#define VME_CTRL_SHORT_D 0x08 -#define VME_CTRL_SYSFAIL 0x10 -#define VME_CTRL_VOWN 0x20 -#define VME_CTRL_A16_REG_MODE 0x40 - -/* VME status register */ - -#define VME_STATUS_SYSCON 0x01 -#define VME_STATUS_SYSFAIL 0x02 -#define VME_STATUS_ACFAIL 0x04 -#define VME_STATUS_SYSRST 0x08 -#define VME_STATUS_VOWN 0x10 - -/* Interrupt types */ - -#define LVL1 0x0002 -#define LVL2 0x0004 -#define LVL3 0x0008 -#define LVL4 0x0010 -#define LVL5 0x0020 -#define LVL6 0x0040 -#define LVL7 0x0080 -#define MULTIVERSE_INTI_INT 0x0100 -#define MULTIVERSE_WB_INT 0x0200 -#define MULTIVERSE_PCI_INT 0x0400 - -/* interrupt acknowledge */ - -#define VME_IACK1 0x04 -#define VME_IACK2 0x08 -#define VME_IACK3 0x0c -#define VME_IACK4 0x10 -#define VME_IACK5 0x14 -#define VME_IACK6 0x18 -#define VME_IACK7 0x1c - -#endif /* __MULTIVERSE_H__ */ diff --git a/boards.cfg b/boards.cfg index d6810d6a1a..52b7a48d01 100644 --- a/boards.cfg +++ b/boards.cfg @@ -1241,7 +1241,6 @@ Orphan powerpc mpc5xxx - matrix_vision mvbc_p Orphan powerpc mpc5xxx - matrix_vision mvsmr MVSMR - Andre Schwarz Orphan powerpc mpc824x - - hidden_dragon HIDDEN_DRAGON - Yusdi Santoso Orphan powerpc mpc824x - etin - debris - Sangmoon Kim -Orphan powerpc mpc824x - etin - kvme080 - Sangmoon Kim Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK - Anton Vorontsov Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK_33 MPC8360ERDK:CLKIN_33MHZ Anton Vorontsov Orphan powerpc mpc83xx - matrix_vision mergerbox MERGERBOX - Andre Schwarz diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 2b9eb69a9d..a8312de66b 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +kvme080 powerpc mpc824x - - Sangmoon Kim ep8248 powerpc mpc8260 - - Yuli Barcohen ispan powerpc mpc8260 - - Yuli Barcohen rattler powerpc mpc8260 - - Yuli Barcohen diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h deleted file mode 100644 index c352a1c804..0000000000 --- a/include/configs/kvme080.h +++ /dev/null @@ -1,251 +0,0 @@ -/* - * (C) Copyright 2005 - * Sangmoon Kim, dogoil@etinsys.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MPC8245 1 -#define CONFIG_KVME080 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_CONS_INDEX 1 - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_IPADDR 192.168.0.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.0.1 - -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 " \ - "root=/dev/nfs rw nfsroot=192.168.0.1:/opt/eldk/ppc_82xx " \ - "ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:" \ - "kvme080:eth0:none " \ - "mtdparts=phys_mapped_flash:12m(root),-(kernel)" - -#define CONFIG_BOOTCOMMAND \ - "tftp 800000 kvme080/uImage; " \ - "bootm 800000" - -#define CONFIG_LOADADDR 800000 - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_EARLY_INIT_R -#define CONFIG_MISC_INIT_R - -#define CONFIG_LOADS_ECHO 1 -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -#undef CONFIG_WATCHDOG - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#define CONFIG_RTC_DS164x - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -#define CONFIG_NETCONSOLE - -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00400000 -#define CONFIG_SYS_MEMTEST_END 0x07C00000 - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x7C000000 -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xFF000000 -#define CONFIG_SYS_NS16550_COM1 0xFF080000 -#define CONFIG_SYS_NS16550_COM2 0xFF080010 -#define CONFIG_SYS_NS16550_COM3 0xFF080020 -#define CONFIG_SYS_NS16550_COM4 0xFF080030 -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 -#define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024) -#define CONFIG_SYS_NVRAM_SIZE 0x7FFF8 - -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_SYS_MONITOR_LEN 0x00040000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MALLOC_LEN (512 << 10) - -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_PROTECT_CLEAR - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 - -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE -#define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE_ADDR -#define CONFIG_ENV_SIZE 0x400 -#define CONFIG_ENV_OFFSET 0 - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK 14745600 - -#define CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_PCI_PNP - -#define CONFIG_EEPRO100 -#define CONFIG_EEPRO100_SROM_WRITE - -#define CONFIG_SYS_RX_ETH_BUFFER 8 - -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 0x7F - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#define CONFIG_SYS_CLK_FREQ 33333333 - -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 -#endif - -#define CONFIG_SYS_DLL_EXTEND 0x00 -#define CONFIG_SYS_PCI_HOLD_DEL 0x20 - -#define CONFIG_SYS_ROMNAL 15 -#define CONFIG_SYS_ROMFAL 31 - -#define CONFIG_SYS_REFINT 430 - -#define CONFIG_SYS_DBUS_SIZE2 1 - -#define CONFIG_SYS_BSTOPRE 121 -#define CONFIG_SYS_REFREC 8 -#define CONFIG_SYS_RDLAT 4 -#define CONFIG_SYS_PRETOACT 3 -#define CONFIG_SYS_ACTTOPRE 5 -#define CONFIG_SYS_ACTORW 3 -#define CONFIG_SYS_SDMODE_CAS_LAT 3 -#define CONFIG_SYS_SDMODE_WRAP 0 - -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 1 -#define CONFIG_SYS_REGDIMM 0 - -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (0x4000000 - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x04000000 -#define CONFIG_SYS_BANK1_END (0x8000000 - 1) -#define CONFIG_SYS_BANK1_ENABLE 1 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x00000000 -#define CONFIG_SYS_BANK4_END 0x00000000 -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x00000000 -#define CONFIG_SYS_BANK5_END 0x00000000 -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x00000000 -#define CONFIG_SYS_BANK6_END 0x00000000 -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x00000000 -#define CONFIG_SYS_BANK7_END 0x00000000 -#define CONFIG_SYS_BANK7_ENABLE 0 - -#define CONFIG_SYS_BANK_ENABLE 0x03 - -#define CONFIG_SYS_ODCR 0x75 -#define CONFIG_SYS_PGMAX 0x32 - -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -#endif /* __CONFIG_H */