ARM: dts: stm32: Don't probe red led at boot for stm32mp157c-ed1-scmi-u-boot

red led and button dedicated to fastboot share the same gpio GPIOA13.
Led driver is probed early so the corresponding gpio is taken and
configured in output which forbid fastboot and stm32prog button usage.

To avoid this, remove the "default-state" property from red led node.

This will avoid to trigger the led driver probe() to configure the led
default state during startup.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

diff --git a/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi
index 84920f534960c95fb0259800bc2bf1a9a6641c77..2abd512e2976ff0d3c483f72be1533478c20420e 100644 (file)
--- a/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi
@@ -37,7 +37,6 @@
                red {
                        label = "error";
                        gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                        status = "okay";
                };
        };