Use board revision detection mechanism to choose correct DTB.
Adjust documentation and build setup accordingly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
F: board/asus/transformer-t30/
F: configs/transformer_t30_defconfig
F: doc/board/asus/transformer_t30.rst
-F: include/configs/transformer-common.h
F: include/configs/transformer-t30.h
# Svyatoslav Ryhel <clamor95@gmail.com>
obj-$(CONFIG_SPL_BUILD) += transformer-t30-spl.o
+obj-$(CONFIG_MULTI_DTB_FIT) += board-info.o
obj-y += transformer-t30.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2024
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <env.h>
+#include <spl_gpio.h>
+
+#include <asm/gpio.h>
+#include <asm/arch/pinmux.h>
+
+/*
+ * PCB_ID[1] is kb_row5_pr5
+ * PCB_ID[3] is kb_col7_pq7
+ * PCB_ID[4] is kb_row2_pr2
+ * PCB_ID[5] is kb_col5_pq5
+ *
+ * Project ID
+ * =====================================================
+ * PCB_ID[1] PCB_ID[5] PCB_ID[4] PCB_ID[3] Project
+ * 0 0 0 0 TF201
+ * 0 0 0 1 P1801
+ * 0 0 1 0 TF300T
+ * 0 0 1 1 TF300TG
+ * 0 1 0 0 TF700T
+ * 0 1 0 1 TF300TL
+ * 0 1 1 0 Extension
+ * 0 1 1 1 TF500T
+ * 1 0 0 0 TF502T/TF600T
+ * =====================================================
+ */
+enum project_rev {
+ TF201, P1801, TF300T, TF300TG, TF700T,
+ TF300TL, EXT, TF500T, TF600T
+};
+
+static const char * const project_id_to_fdt[] = {
+ [TF201] = "tegra30-asus-tf201",
+ [P1801] = "tegra30-asus-p1801-t",
+ [TF300T] = "tegra30-asus-tf300t",
+ [TF300TG] = "tegra30-asus-tf300tg",
+ [TF700T] = "tegra30-asus-tf700t",
+ [TF300TL] = "tegra30-asus-tf300tl",
+ [TF600T] = "tegra30-asus-tf600t",
+};
+
+static int id_gpio_get_value(u32 pingrp, u32 pin)
+{
+ /* Configure pinmux */
+ pinmux_set_func(pingrp, PMUX_FUNC_KBC);
+ pinmux_set_pullupdown(pingrp, PMUX_PULL_DOWN);
+ pinmux_tristate_enable(pingrp);
+ pinmux_set_io(pingrp, PMUX_PIN_INPUT);
+
+ /*
+ * Since this function may be called
+ * during DM reload we should use SPL
+ * GPIO functions which do not depend
+ * on DM.
+ */
+ spl_gpio_input(NULL, pin);
+ return spl_gpio_get_value(NULL, pin);
+}
+
+static int get_project_id(void)
+{
+ u32 pcb_id1, pcb_id3, pcb_id4, pcb_id5;
+
+ pcb_id1 = id_gpio_get_value(PMUX_PINGRP_KB_ROW5_PR5,
+ TEGRA_GPIO(R, 5));
+ pcb_id3 = id_gpio_get_value(PMUX_PINGRP_KB_COL7_PQ7,
+ TEGRA_GPIO(Q, 7));
+ pcb_id4 = id_gpio_get_value(PMUX_PINGRP_KB_ROW2_PR2,
+ TEGRA_GPIO(R, 2));
+ pcb_id5 = id_gpio_get_value(PMUX_PINGRP_KB_COL5_PQ5,
+ TEGRA_GPIO(Q, 5));
+
+ /* Construct board ID */
+ int proj_id = pcb_id1 << 3 | pcb_id5 << 2 |
+ pcb_id4 << 1 | pcb_id3;
+
+ log_debug("[TRANSFORMER]: project id %d (%s)\n", proj_id,
+ project_id_to_fdt[proj_id]);
+
+ /* Mark tablet with SPI flash */
+ if (proj_id == TF600T)
+ env_set_hex("spiflash", true);
+ else
+ env_set_hex("spiflash", false);
+
+ return proj_id & 0xf;
+}
+
+int board_fit_config_name_match(const char *name)
+{
+ if (!strcmp(name, project_id_to_fdt[get_project_id()]))
+ return 0;
+
+ return -1;
+}
+
+void nvidia_board_late_init(void)
+{
+ char dt_path[64] = { 0 };
+
+ snprintf(dt_path, sizeof(dt_path), "%s.dtb",
+ project_id_to_fdt[get_project_id()]);
+ env_set("fdtfile", dt_path);
+}
+++ /dev/null
-CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-p1801-t"
-# CONFIG_I2C_MUX is not set
-CONFIG_USB_GADGET_PRODUCT_NUM=0x4cb0
+++ /dev/null
-CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf201"
-# CONFIG_I2C_MUX is not set
-CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
+++ /dev/null
-CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf300t"
-# CONFIG_I2C_MUX is not set
-CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
+++ /dev/null
-CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf300tg"
-# CONFIG_I2C_MUX is not set
-CONFIG_USB_GADGET_PRODUCT_NUM=0x4c80
+++ /dev/null
-CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf300tl"
-# CONFIG_I2C_MUX is not set
-CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
+++ /dev/null
-CONFIG_ENV_SOURCE_FILE="tf600t"
-CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf600t"
-CONFIG_BOOTCOMMAND="setenv gpio_button 222; if run check_button; then poweroff; fi; setenv gpio_button 132; if run check_button; then echo Starting SPI flash update ...; run update_spi; fi; run bootcmd_usb0; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
-# CONFIG_I2C_MUX is not set
-CONFIG_TEGRA20_SLINK=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
+++ /dev/null
-CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf700t"
-CONFIG_CLK_GPIO=y
-CONFIG_USB_GADGET_PRODUCT_NUM=0x4c90
-CONFIG_VIDEO_BRIDGE_TOSHIBA_TC358768=y
+++ /dev/null
-#include <env/nvidia/prod_upd.env>
-
-button_cmd_0_name=Volume Down
-button_cmd_0=bootmenu
-button_cmd_1_name=Lid sensor
-button_cmd_1=poweroff
-partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
-
-bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu
-bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu
-bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu
-bootmenu_3=update bootloader=run update_spi
-bootmenu_4=reboot RCM=enterrcm
-bootmenu_5=reboot=reset
-bootmenu_6=power off=poweroff
-bootmenu_delay=-1
#include <env/nvidia/prod_upd.env>
button_cmd_0_name=Volume Down
-button_cmd_0=bootmenu
+button_cmd_0=if spiflash; then run update_spi; else bootmenu; fi
button_cmd_1_name=Lid sensor
button_cmd_1=poweroff
partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_OF_LIST="tegra30-asus-p1801-t tegra30-asus-tf201 tegra30-asus-tf300t tegra30-asus-tf300tg tegra30-asus-tf300tl tegra30-asus-tf600t tegra30-asus-tf700t"
+CONFIG_DTB_RESELECT=y
+CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_PART=2
CONFIG_BUTTON=y
+CONFIG_CLK_GPIO=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x91000000
CONFIG_FASTBOOT_BUF_SIZE=0x10000000
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_BUTTON_KEYBOARD=y
+CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_TPS65910=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_TPS65911=y
CONFIG_PWM_TEGRA=y
CONFIG_SYS_NS16550=y
+CONFIG_TEGRA20_SLINK=y
CONFIG_SYSRESET_TPS65910=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="ASUS"
CONFIG_USB_GADGET_VENDOR_NUM=0x0b05
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4daf
CONFIG_CI_UDC=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_LOGO is not set
+CONFIG_VIDEO_BRIDGE_TOSHIBA_TC358768=y
CONFIG_VIDEO_TEGRA20=y
Build U-Boot
------------
-Device support is implemented by applying a config fragment to a generic board
-defconfig. Valid fragments are ``tf201.config``, ``tf300t.config``,
-``tf300tg.config``, ``tf300tl.config``, ``tf700t.config``, ``tf600t.config`` and
-``p1801-t.config``.
+U-Boot features ability to detect transformer device model on which it is
+loaded. The list of supported devices include:
+- ASUS Transformer Prime TF201
+- ASUS Transformer Pad (3G/LTE) TF300T/TG/TL
+- ASUS Transformer Infinity TF700T
+- ASUS Portable AiO P1801-T
+- ASUS VivoTab RT TF600T
.. code-block:: bash
$ export CROSS_COMPILE=arm-linux-gnueabi-
- $ make transformer_t30_defconfig tf201.config # For TF201
+ $ make transformer_t30_defconfig
$ make
After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin``
projects / u-boot.git / commitdiff
