rtc: rv3028: add support to manage VDD regulator

This commit adds support to manage an external regulator to enable the main
power supply VDD.

Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>

diff --git a/drivers/rtc/rv3028.c b/drivers/rtc/rv3028.c
index 9f63afc14a8e53daab4eaf9789986713ebdbefa4..b14d2a246ffcf9eaac02d145844e36bb680bc8ab 100644 (file)
--- a/drivers/rtc/rv3028.c
+++ b/drivers/rtc/rv3028.c
@@ -12,6 +12,9 @@
 #include <dm.h>
 #include <i2c.h>
 #include <rtc.h>
+#include <dm/device_compat.h>
+#include <linux/delay.h>
+#include <power/regulator.h>
 
 #define RV3028_SEC                     0x00
 #define RV3028_MIN                     0x01
@@ -78,6 +81,12 @@
 
 #define RTC_RV3028_LEN                 7
 
+#define VDD_START_TIME_US              200000
+
+struct rv3028_priv {
+       struct udevice *vdd;
+};
+
 static int rv3028_rtc_get(struct udevice *dev, struct rtc_time *tm)
 {
        u8 regs[RTC_RV3028_LEN];
@@ -180,6 +189,28 @@ static int rv3028_rtc_write8(struct udevice *dev, unsigned int reg, int val)
 
 static int rv3028_probe(struct udevice *dev)
 {
+       struct rv3028_priv *priv = dev_get_priv(dev);
+       int ret;
+
+       if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
+               ret =  device_get_supply_regulator(dev, "vdd-supply", &priv->vdd);
+               if (ret && ret != -ENOENT) {
+                       dev_err(dev, "Warning: cannot get VDD supply\n");
+                       return ret;
+               }
+
+               if (priv->vdd) {
+                       ret = regulator_set_enable_if_allowed(priv->vdd, true);
+                       if (ret) {
+                               dev_err(dev, "failed to enable vdd-supply\n");
+                               return ret;
+                       }
+
+                       /* We must wait Tstart = 0.2s before access to I2C */
+                       udelay(VDD_START_TIME_US);
+               }
+       }
+
        i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS |
                                DM_I2C_CHIP_WR_ADDRESS);
 
@@ -205,4 +236,5 @@ U_BOOT_DRIVER(rtc_rv3028) = {
        .probe  = rv3028_probe,
        .of_match = rv3028_rtc_ids,
        .ops    = &rv3028_rtc_ops,
+       .priv_auto      = sizeof(struct rv3028_priv),
 };