+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) Siemens AG, 2018-2021
- *
- * Authors:
- * Le Jin <le.jin@siemens.com>
- * Jan Kiszka <jan.kiszka@siemens.com>
- *
- * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2
- */
-
-#include "k3-am654.dtsi"
-#include <dt-bindings/phy/phy.h>
-
-/ {
- aliases {
- serial0 = &wkup_uart0;
- serial1 = &mcu_uart0;
- serial2 = &main_uart0;
- serial3 = &main_uart1;
- i2c0 = &wkup_i2c0;
- i2c1 = &mcu_i2c0;
- i2c2 = &main_i2c0;
- i2c3 = &main_i2c1;
- i2c4 = &main_i2c2;
- i2c5 = &main_i2c3;
- spi0 = &mcu_spi0;
- mmc0 = &sdhci1;
- mmc1 = &sdhci0;
- };
-
- chosen {
- stdout-path = "serial3:115200n8";
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- secure_ddr: secure-ddr@9e800000 {
- reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
- alignment = <0x1000>;
- no-map;
- };
-
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa0000000 0 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa0100000 0 0xf00000>;
- no-map;
- };
-
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa1000000 0 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa1100000 0 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a2000000 {
- reg = <0x00 0xa2000000 0x00 0x00200000>;
- alignment = <0x1000>;
- no-map;
- };
-
- /* To reserve the power-on(PON) reason for watchdog reset */
- wdt_reset_memory_region: wdt-memory@a2200000 {
- reg = <0x00 0xa2200000 0x00 0x00001000>;
- no-map;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&leds_pins_default>;
-
- status-led-red {
- gpios = <&wkup_gpio0 32 GPIO_ACTIVE_HIGH>;
- panic-indicator;
- };
-
- status-led-green {
- gpios = <&wkup_gpio0 24 GPIO_ACTIVE_HIGH>;
- };
-
- user-led1-red {
- gpios = <&pcal9535_3 14 GPIO_ACTIVE_HIGH>;
- };
-
- user-led1-green {
- gpios = <&pcal9535_2 15 GPIO_ACTIVE_HIGH>;
- };
-
- user-led2-red {
- gpios = <&wkup_gpio0 17 GPIO_ACTIVE_HIGH>;
- };
-
- user-led2-green {
- gpios = <&wkup_gpio0 22 GPIO_ACTIVE_HIGH>;
- };
- };
-
- dp_refclk: clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- };
-};
-
-&wkup_pmx0 {
- wkup_i2c0_pins_default: wkup-i2c0-default-pins {
- pinctrl-single,pins = <
- /* (AC7) WKUP_I2C0_SCL */
- AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0)
- /* (AD6) WKUP_I2C0_SDA */
- AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0)
- >;
- };
-
- mcu_i2c0_pins_default: mcu-i2c0-default-pins {
- pinctrl-single,pins = <
- /* (AD8) MCU_I2C0_SCL */
- AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0)
- /* (AD7) MCU_I2C0_SDA */
- AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0)
- >;
- };
-
- arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins {
- pinctrl-single,pins = <
- /* (R2) WKUP_GPIO0_21 */
- AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7)
- >;
- };
-
- push_button_pins_default: push-button-default-pins {
- pinctrl-single,pins = <
- /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
- AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7)
- >;
- };
-
- arduino_uart_pins_default: arduino-uart-default-pins {
- pinctrl-single,pins = <
- /* (P4) MCU_UART0_RXD */
- AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
- /* (P5) MCU_UART0_TXD */
- AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
- >;
- };
-
- arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins {
- pinctrl-single,pins = <
- /* (P1) WKUP_GPIO0_31 */
- AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7)
- /* (N3) WKUP_GPIO0_33 */
- AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7)
- >;
- };
-
- arduino_io_oe_pins_default: arduino-io-oe-default-pins {
- pinctrl-single,pins = <
- /* (N4) WKUP_GPIO0_34 */
- AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7)
- /* (M2) WKUP_GPIO0_36 */
- AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7)
- /* (M3) WKUP_GPIO0_37 */
- AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7)
- /* (M4) WKUP_GPIO0_38 */
- AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7)
- /* (M1) WKUP_GPIO0_41 */
- AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7)
- >;
- };
-
- mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
- pinctrl-single,pins = <
- /* (V1) MCU_OSPI0_CLK */
- AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0)
- /* (U2) MCU_OSPI0_DQS */
- AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0)
- /* (U4) MCU_OSPI0_D0 */
- AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0)
- /* (U5) MCU_OSPI0_D1 */
- AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0)
- /* (R4) MCU_OSPI0_CSn0 */
- AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0)
- >;
- };
-
- db9_com_mode_pins_default: db9-com-mode-default-pins {
- pinctrl-single,pins = <
- /* (AD3) WKUP_GPIO0_5, used as uart0 mode 0 */
- AM65X_WKUP_IOPAD(0x00c4, PIN_OUTPUT, 7)
- /* (AC3) WKUP_GPIO0_4, used as uart0 mode 1 */
- AM65X_WKUP_IOPAD(0x00c0, PIN_OUTPUT, 7)
- /* (AC1) WKUP_GPIO0_7, used as uart0 term */
- AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 7)
- /* (AC2) WKUP_GPIO0_6, used as uart0 en */
- AM65X_WKUP_IOPAD(0x00c8, PIN_OUTPUT, 7)
- >;
- };
-
- leds_pins_default: leds-default-pins {
- pinctrl-single,pins = <
- /* (T2) WKUP_GPIO0_17, used as user led1 red */
- AM65X_WKUP_IOPAD(0x0014, PIN_OUTPUT, 7)
- /* (R3) WKUP_GPIO0_22, used as user led1 green */
- AM65X_WKUP_IOPAD(0x0028, PIN_OUTPUT, 7)
- /* (R5) WKUP_GPIO0_24, used as status led red */
- AM65X_WKUP_IOPAD(0x0030, PIN_OUTPUT, 7)
- /* (N2) WKUP_GPIO0_32, used as status led green */
- AM65X_WKUP_IOPAD(0x0050, PIN_OUTPUT, 7)
- >;
- };
-
- mcu_spi0_pins_default: mcu-spi0-default-pins {
- pinctrl-single,pins = <
- /* (Y1) MCU_SPI0_CLK */
- AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0)
- /* (Y3) MCU_SPI0_D0 */
- AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0)
- /* (Y2) MCU_SPI0_D1 */
- AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0)
- /* (Y4) MCU_SPI0_CS0 */
- AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
- >;
- };
-
- minipcie_pins_default: minipcie-default-pins {
- pinctrl-single,pins = <
- /* (P2) MCU_OSPI1_DQS.WKUP_GPIO0_27 */
- AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7)
- >;
- };
-};
-
-&main_pmx0 {
- main_uart1_pins_default: main-uart1-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */
- AM65X_IOPAD(0x014c, PIN_OUTPUT, 6) /* (AD23) UART1_TXD */
- AM65X_IOPAD(0x0178, PIN_INPUT, 6) /* (AD22) UART1_CTSn */
- AM65X_IOPAD(0x017c, PIN_OUTPUT, 6) /* (AC21) UART1_RTSn */
- >;
- };
-
- main_i2c3_pins_default: main-i2c3-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x01c0, PIN_INPUT, 2) /* (AF13) I2C3_SCL */
- AM65X_IOPAD(0x01d4, PIN_INPUT, 2) /* (AG12) I2C3_SDA */
- >;
- };
-
- main_mmc1_pins_default: main-mmc1-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
- AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
- AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */
- AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */
- AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */
- AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */
- AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
- AM65X_IOPAD(0x02e0, PIN_INPUT_PULLUP, 0) /* (C24) MMC1_SDWP */
- >;
- };
-
- usb0_pins_default: usb0-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
- >;
- };
-
- usb1_pins_default: usb1-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
- >;
- };
-
- arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (AG18) GPIO0_33 */
- AM65X_IOPAD(0x008C, PIN_OUTPUT, 7) /* (AF17) GPIO0_35 */
- AM65X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (AH16) GPIO0_38 */
- AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7) /* (AH15) GPIO0_43 */
- AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7) /* (AG15) GPIO0_48 */
- AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7) /* (AD15) GPIO0_51 */
- >;
- };
-
- dss_vout1_pins_default: dss-vout1-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */
- AM65X_IOPAD(0x0004, PIN_OUTPUT, 1) /* VOUT1_DATA1 */
- AM65X_IOPAD(0x0008, PIN_OUTPUT, 1) /* VOUT1_DATA2 */
- AM65X_IOPAD(0x000c, PIN_OUTPUT, 1) /* VOUT1_DATA3 */
- AM65X_IOPAD(0x0010, PIN_OUTPUT, 1) /* VOUT1_DATA4 */
- AM65X_IOPAD(0x0014, PIN_OUTPUT, 1) /* VOUT1_DATA5 */
- AM65X_IOPAD(0x0018, PIN_OUTPUT, 1) /* VOUT1_DATA6 */
- AM65X_IOPAD(0x001c, PIN_OUTPUT, 1) /* VOUT1_DATA7 */
- AM65X_IOPAD(0x0020, PIN_OUTPUT, 1) /* VOUT1_DATA8 */
- AM65X_IOPAD(0x0024, PIN_OUTPUT, 1) /* VOUT1_DATA9 */
- AM65X_IOPAD(0x0028, PIN_OUTPUT, 1) /* VOUT1_DATA10 */
- AM65X_IOPAD(0x002c, PIN_OUTPUT, 1) /* VOUT1_DATA11 */
- AM65X_IOPAD(0x0030, PIN_OUTPUT, 1) /* VOUT1_DATA12 */
- AM65X_IOPAD(0x0034, PIN_OUTPUT, 1) /* VOUT1_DATA13 */
- AM65X_IOPAD(0x0038, PIN_OUTPUT, 1) /* VOUT1_DATA14 */
- AM65X_IOPAD(0x003c, PIN_OUTPUT, 1) /* VOUT1_DATA15 */
- AM65X_IOPAD(0x0040, PIN_OUTPUT, 1) /* VOUT1_DATA16 */
- AM65X_IOPAD(0x0044, PIN_OUTPUT, 1) /* VOUT1_DATA17 */
- AM65X_IOPAD(0x0048, PIN_OUTPUT, 1) /* VOUT1_DATA18 */
- AM65X_IOPAD(0x004c, PIN_OUTPUT, 1) /* VOUT1_DATA19 */
- AM65X_IOPAD(0x0050, PIN_OUTPUT, 1) /* VOUT1_DATA20 */
- AM65X_IOPAD(0x0054, PIN_OUTPUT, 1) /* VOUT1_DATA21 */
- AM65X_IOPAD(0x0058, PIN_OUTPUT, 1) /* VOUT1_DATA22 */
- AM65X_IOPAD(0x005c, PIN_OUTPUT, 1) /* VOUT1_DATA23 */
- AM65X_IOPAD(0x0060, PIN_OUTPUT, 1) /* VOUT1_VSYNC */
- AM65X_IOPAD(0x0064, PIN_OUTPUT, 1) /* VOUT1_HSYNC */
- AM65X_IOPAD(0x0068, PIN_OUTPUT, 1) /* VOUT1_PCLK */
- AM65X_IOPAD(0x006c, PIN_OUTPUT, 1) /* VOUT1_DE */
- >;
- };
-
- dp_pins_default: dp-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AF18) DP rst_n */
- >;
- };
-
- main_i2c2_pins_default: main-i2c2-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) I2C2_SCL */
- AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */
- >;
- };
-};
-
-&main_pmx1 {
- main_i2c0_pins_default: main-i2c0-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */
- AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */
- >;
- };
-
- main_i2c1_pins_default: main-i2c1-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */
- AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */
- >;
- };
-
- ecap0_pins_default: ecap0-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
- >;
- };
-};
-
-&wkup_uart0 {
- /* Wakeup UART is used by System firmware */
- status = "reserved";
-};
-
-&main_uart1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart1_pins_default>;
-};
-
-&mcu_uart0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&arduino_uart_pins_default>;
-};
-
-&main_gpio0 {
- pinctrl-names = "default";
- pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>;
- gpio-line-names =
- "main_gpio0-base", "", "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "", "", "",
- "", "", "", "IO4", "", "IO5", "", "", "IO6", "",
- "", "", "", "IO7", "", "", "", "", "IO8", "",
- "", "IO9";
-};
-
-&wkup_gpio0 {
- pinctrl-names = "default";
- pinctrl-0 =
- <&arduino_io_d2_to_d3_pins_default>,
- <&arduino_i2c_aio_switch_pins_default>,
- <&arduino_io_oe_pins_default>,
- <&push_button_pins_default>,
- <&db9_com_mode_pins_default>;
- gpio-line-names =
- /* 0..9 */
- "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
- "UART0-enable", "UART0-terminate", "", "WIFI-disable",
- /* 10..19 */
- "", "", "", "", "", "", "", "", "", "",
- /* 20..29 */
- "", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0",
- /* 30..39 */
- "IO1", "IO2", "", "IO3", "IO17-direction", "A5",
- "IO16-direction", "IO15-direction", "IO14-direction", "A3",
- /* 40..49 */
- "", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13",
- "IO11",
- /* 50..51 */
- "IO12", "IO10";
-};
-
-&wkup_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&wkup_i2c0_pins_default>;
- clock-frequency = <400000>;
-};
-
-&mcu_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_i2c0_pins_default>;
- clock-frequency = <400000>;
-
- psu: regulator@60 {
- compatible = "ti,tps62363";
- reg = <0x60>;
- regulator-name = "tps62363-vout";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- ti,vsel0-state-high;
- ti,vsel1-state-high;
- ti,enable-vout-discharge;
- };
-
- /* D4200 */
- pcal9535_1: gpio@20 {
- compatible = "nxp,pcal9535";
- reg = <0x20>;
- #gpio-cells = <2>;
- gpio-controller;
- gpio-line-names =
- "A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull",
- "A5-pull", "", "",
- "IO14-enable", "IO15-enable", "IO16-enable",
- "IO17-enable", "IO18-enable", "IO19-enable";
- };
-
- /* D4201 */
- pcal9535_2: gpio@21 {
- compatible = "nxp,pcal9535";
- reg = <0x21>;
- #gpio-cells = <2>;
- gpio-controller;
- gpio-line-names =
- "IO0-direction", "IO1-direction", "IO2-direction",
- "IO3-direction", "IO4-direction", "IO5-direction",
- "IO6-direction", "IO7-direction",
- "IO8-direction", "IO9-direction", "IO10-direction",
- "IO11-direction", "IO12-direction", "IO13-direction",
- "IO19-direction";
- };
-
- /* D4202 */
- pcal9535_3: gpio@25 {
- compatible = "nxp,pcal9535";
- reg = <0x25>;
- #gpio-cells = <2>;
- gpio-controller;
- gpio-line-names =
- "IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull",
- "IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull",
- "IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull",
- "IO12-pull", "IO13-pull";
- };
-};
-
-&main_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c0_pins_default>;
- clock-frequency = <400000>;
-
- rtc: rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-
- eeprom: eeprom@54 {
- compatible = "atmel,24c08";
- reg = <0x54>;
- pagesize = <16>;
- };
-};
-
-&main_i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c1_pins_default>;
- clock-frequency = <400000>;
-};
-
-&main_i2c2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c2_pins_default>;
- clock-frequency = <400000>;
-};
-
-&main_i2c3 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c3_pins_default>;
- clock-frequency = <400000>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp-bridge@f {
- compatible = "toshiba,tc358767";
- reg = <0x0f>;
- pinctrl-names = "default";
- pinctrl-0 = <&dp_pins_default>;
- reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
-
- clock-names = "ref";
- clocks = <&dp_refclk>;
-
- toshiba,hpd-pin = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- bridge_in: endpoint {
- remote-endpoint = <&dpi_out>;
- };
- };
- };
- };
-};
-
-&mcu_cpsw {
- status = "disabled";
-};
-
-&ecap0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&ecap0_pins_default>;
-};
-
-&sdhci1 {
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
- disable-wp;
-};
-
-&usb0 {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_pins_default>;
- dr_mode = "host";
-};
-
-&usb1 {
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_pins_default>;
- dr_mode = "host";
-};
-
-&mcu_spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_spi0_pins_default>;
-
- #address-cells = <1>;
- #size-cells = <0>;
- ti,pindir-d0-out-d1-in;
-};
-
-&tscadc1 {
- status = "okay";
- adc {
- ti,adc-channels = <0 1 2 3 4 5>;
- };
-};
-
-&ospi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <1>;
- spi-max-frequency = <50000000>;
- cdns,tshsl-ns = <60>;
- cdns,tsd2d-ns = <60>;
- cdns,tchsh-ns = <60>;
- cdns,tslch-ns = <60>;
- cdns,read-delay = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- seboot@0 {
- label = "seboot";
- reg = <0x0 0x180000>; /* 1.5M */
- };
-
- tispl@180000 {
- label = "tispl";
- reg = <0x180000 0x200000>; /* 2M */
- };
-
- u-boot@380000 {
- label = "u-boot";
- reg = <0x380000 0x300000>; /* 3M */
- };
-
- env@680000 {
- label = "env";
- reg = <0x680000 0x20000>; /* 128K */
- };
-
- env-backup@6a0000 {
- label = "env.backup";
- reg = <0x6a0000 0x20000>; /* 128K */
- };
-
- otpcmd@6c0000 {
- label = "otpcmd";
- reg = <0x6c0000 0x10000>; /* 64K */
- };
-
- unused@6d0000 {
- label = "unused";
- reg = <0x6d0000 0x7b0000>; /* 7872K */
- };
-
- seboot-backup@e80000 {
- label = "seboot.backup";
- reg = <0xe80000 0x180000>; /* 1.5M */
- };
- };
- };
-};
-
-&dss {
- pinctrl-names = "default";
- pinctrl-0 = <&dss_vout1_pins_default>;
-
- assigned-clocks = <&k3_clks 67 2>;
- assigned-clock-parents = <&k3_clks 67 5>;
-};
-
-&dss_ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@1 {
- reg = <1>;
-
- dpi_out: endpoint {
- remote-endpoint = <&bridge_in>;
- };
- };
-};
-
-&pcie1_rc {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&minipcie_pins_default>;
-
- num-lanes = <1>;
- phys = <&serdes1 PHY_TYPE_PCIE 0>;
- phy-names = "pcie-phy0";
- reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
-};
-
-&mailbox0_cluster0 {
- status = "okay";
- interrupts = <436>;
-
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-tx = <1 0 0>;
- ti,mbox-rx = <0 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
- interrupts = <432>;
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-tx = <1 0 0>;
- ti,mbox-rx = <0 0 0>;
- };
-};
-
-&mcu_r5fss0_core0 {
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
- mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
-};
-
-&mcu_r5fss0_core1 {
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
- mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
-};
-
-&mcu_rti1 {
- memory-region = <&wdt_reset_memory_region>;
-};
projects / u-boot.git / commitdiff
