From fd70aa41468be4324275910f85578cb5be6a0439 Mon Sep 17 00:00:00 2001
From: angelo <sysamfw@gmail.com>
Date: Fri, 23 Nov 2012 12:23:39 +0000
Subject: [PATCH] m68k/lib: fix serial driver relocation
Fix coldfire serial driver bindings no more relocated to ram after last
changes to drivers/serial/serial.c (regression).
Serial initialization in ram has to be called after that gd->reloc_off is
calculated.
Signed-off-by: Angelo Dureghello <sysamfw@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
---
arch/m68k/lib/board.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index 794b8679fe..e934cb6c25 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
- serial_initialize();
-
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
WATCHDOG_RESET ();
gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
+ serial_initialize();
+
monitor_flash_len = (ulong)&__init_end - dest_addr;
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
--
2.39.5