From 94633c36f9eb34e721faf38270b3dddc8f1cdaed Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 2 Aug 2022 07:33:47 -0400 Subject: [PATCH] net: Make DM_ETH be selected by NETDEVICE The deadline for DM_ETH migration passed 2 years ago. Now that platforms which cannot be migrated have been either removed or had drivers disabled, and platforms that needed minor help to migrate have been forcefully migrated, we can complete the migration. This entails select'ing DM_ETH under NETDEVICES, and then removing now extraneous depends on lines. In a few places, we can now either remove options or just simplify later dependencies. Cc: Ramon Fried Cc: Simon Glass Signed-off-by: Tom Rini Acked-by: Ramon Fried --- Makefile | 1 - drivers/net/Kconfig | 78 ++++++++++++--------------------------------- 2 files changed, 21 insertions(+), 58 deletions(-) diff --git a/Makefile b/Makefile index 1a66f69a4b..187196c1c6 100644 --- a/Makefile +++ b/Makefile @@ -1151,7 +1151,6 @@ ifneq ($(CONFIG_DM),y) endif $(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\ $(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG)) - $(call deprecated,CONFIG_DM_ETH,Ethernet drivers,v2020.07,$(CONFIG_NET)) $(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY)) $(call deprecated,CONFIG_DM_KEYBOARD,Keyboard drivers,v2022.10,$(CONFIG_KEYBOARD)) @# CONFIG_SYS_TIMER_RATE has brackets in it for some boards which diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 4c1e1a77bb..6bbbadc5ee 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -7,7 +7,7 @@ config ETH def_bool y config DM_ETH - bool "Enable Driver Model for Ethernet drivers" + bool depends on DM help Enable driver model for Ethernet. @@ -18,7 +18,7 @@ config DM_ETH config DM_MDIO bool "Enable Driver Model for MDIO devices" - depends on DM_ETH && PHYLIB + depends on PHYLIB help Enable driver model for MDIO devices @@ -43,7 +43,7 @@ config DM_MDIO_MUX config DM_DSA bool "Enable Driver Model for DSA switches" - depends on DM_ETH && DM_MDIO + depends on DM_MDIO depends on PHY_FIXED help Enable driver model for DSA switches @@ -94,7 +94,7 @@ config DSA_SANDBOX menuconfig NETDEVICES bool "Network device support" depends on NET - default y if DM_ETH + select DM_ETH help You must select Y to enable any network device support Generally if you have any networking support this is a given @@ -112,7 +112,7 @@ config PHY_GIGE config AG7XXX bool "Atheros AG7xxx Ethernet MAC support" - depends on DM_ETH && ARCH_ATH79 + depends on ARCH_ATH79 select PHYLIB help This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is @@ -121,7 +121,6 @@ config AG7XXX config ALTERA_TSE bool "Altera Triple-Speed Ethernet MAC support" - depends on DM_ETH select PHYLIB help This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. @@ -154,7 +153,7 @@ config BCM_SF2_ETH_GMAC config BCM6348_ETH bool "BCM6348 EMAC support" - depends on DM_ETH && ARCH_BMIPS + depends on ARCH_BMIPS select DMA select DMA_CHANNELS select MII @@ -164,7 +163,7 @@ config BCM6348_ETH config BCM6368_ETH bool "BCM6368 EMAC support" - depends on DM_ETH && ARCH_BMIPS + depends on ARCH_BMIPS select DMA select MII help @@ -172,21 +171,19 @@ config BCM6368_ETH config BCMGENET bool "BCMGENET V5 support" - depends on DM_ETH select PHYLIB help This driver supports the BCMGENET Ethernet MAC. config CORTINA_NI_ENET bool "Cortina-Access Ethernet driver" - depends on DM_ETH && CORTINA_PLATFORM + depends on CORTINA_PLATFORM help This driver supports the Cortina-Access Ethernet MAC for all supported CAxxxx SoCs. config CALXEDA_XGMAC bool "Calxeda XGMAC support" - depends on DM_ETH help This driver supports the XGMAC in Calxeda Highbank and Midway machines. @@ -198,7 +195,6 @@ config DRIVER_DM9000 config DWC_ETH_QOS bool "Synopsys DWC Ethernet QOS device support" - depends on DM_ETH select PHYLIB help This driver supports the Synopsys Designware Ethernet QOS (Quality @@ -273,7 +269,7 @@ config EEPRO100 ethernet family of adapters. config ETH_SANDBOX - depends on DM_ETH && SANDBOX + depends on SANDBOX default y bool "Sandbox: Mocked Ethernet driver" help @@ -283,7 +279,7 @@ config ETH_SANDBOX This driver is particularly useful in the test/dm/eth.c tests config ETH_SANDBOX_RAW - depends on DM_ETH && SANDBOX + depends on SANDBOX default y bool "Sandbox: Bridge to Linux Raw Sockets" help @@ -303,7 +299,6 @@ config ETH_DESIGNWARE config ETH_DESIGNWARE_MESON8B bool "Amlogic Meson8b and later glue driver for Synopsys Designware Ethernet MAC" - depends on DM_ETH select ETH_DESIGNWARE help This provides glue layer to use Synopsys Designware Ethernet MAC @@ -314,7 +309,7 @@ config ETH_DESIGNWARE_SOCFPGA select SYSCON select DW_ALTDESCRIPTOR bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC" - depends on DM_ETH && ETH_DESIGNWARE + depends on ETH_DESIGNWARE help The Altera SoCFPGA requires additional configuration of the Altera system manager to correctly interface with the PHY. @@ -322,7 +317,7 @@ config ETH_DESIGNWARE_SOCFPGA config ETH_DESIGNWARE_S700 bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC" - depends on DM_ETH && ETH_DESIGNWARE + depends on ETH_DESIGNWARE help This provides glue layer to use Synopsys Designware Ethernet MAC present on Actions S700 SoC. @@ -386,7 +381,6 @@ config FTMAC100 config FTGMAC100 bool "Ftgmac100 Ethernet Support" - depends on DM_ETH select PHYLIB help This driver supports the Faraday's FTGMAC100 Gigabit SoC @@ -414,7 +408,6 @@ config SYS_DISCOVER_PHY config MCFFEC bool "ColdFire Ethernet Support" - depends on DM_ETH select PHYLIB select SYS_DISCOVER_PHY help @@ -427,7 +420,6 @@ config SYS_UNIFY_CACHE config FSLDMAFEC bool "ColdFire DMA Ethernet Support" - depends on DM_ETH select PHYLIB select SYS_DISCOVER_PHY help @@ -439,15 +431,6 @@ config KS8851_MLL help The Microchip KS8851 parallel bus external ethernet interface chip. -if KS8851_MLL -if !DM_ETH -config KS8851_MLL_BASEADDR - hex "Microchip KS8851-MLL Base Address" - help - Define this to hold the physical address of the device (I/O space) -endif #DM_ETH -endif #KS8851_MLL - config KSZ9477 bool "Microchip KSZ9477 I2C controller driver" depends on DM_DSA && DM_I2C @@ -458,7 +441,7 @@ config KSZ9477 config MVGBE bool "Marvell Orion5x/Kirkwood network interface support" depends on ARCH_KIRKWOOD || ARCH_ORION5X - select PHYLIB if DM_ETH + select PHYLIB help This driver supports the network interface units in the Marvell Orion5x and Kirkwood SoCs @@ -563,7 +546,6 @@ config OCTEONTX2_CGX_INTF config PCH_GBE bool "Intel Platform Controller Hub EG20T GMAC driver" - depends on DM_ETH select PHYLIB help This MAC is present in Intel Platform Controller Hub EG20T. It @@ -624,25 +606,14 @@ config SJA1105 config SMC911X bool "SMSC LAN911x and LAN921x controller driver" -if SMC911X - -if !DM_ETH -config SMC911X_BASE - hex "SMC911X Base Address" - help - Define this to hold the physical address - of the device (I/O space) -endif #DM_ETH - config SMC911X_32_BIT bool "Enable SMC911X 32-bit interface" + depends on SMC911X help Define this if data bus is 32 bits. If your processor use a narrower 16 bit bus or cannot convert one 32 bit word to two 16 bit words, leave this to "n". -endif #SMC911X - config SUN7I_GMAC bool "Enable Allwinner GMAC Ethernet support" help @@ -658,14 +629,12 @@ config SUN7I_GMAC_FORCE_TXERR config SUN4I_EMAC bool "Allwinner Sun4i Ethernet MAC support" - depends on DM_ETH select PHYLIB help This driver supports the Allwinner based SUN4I Ethernet MAC. config SUN8I_EMAC bool "Allwinner Sun8i Ethernet MAC support" - depends on DM_ETH select PHYLIB select PHY_GIGE help @@ -687,7 +656,6 @@ config TULIP This driver supports DEC DC2114x Fast ethernet chips. config XILINX_AXIEMAC - depends on DM_ETH select PHYLIB select MII bool "Xilinx AXI Ethernet" @@ -695,7 +663,7 @@ config XILINX_AXIEMAC This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. config XILINX_AXIMRMAC - depends on DM_ETH && ARCH_VERSAL + depends on ARCH_VERSAL bool "Xilinx AXI MRMAC" help MRMAC is a high performance, low latency, adaptable Ethernet @@ -704,7 +672,6 @@ config XILINX_AXIMRMAC Versal designs. config XILINX_EMACLITE - depends on DM_ETH select PHYLIB select MII bool "Xilinx Ethernetlite" @@ -712,7 +679,6 @@ config XILINX_EMACLITE This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. config ZYNQ_GEM - depends on DM_ETH select PHYLIB bool "Xilinx Ethernet GEM" help @@ -720,7 +686,7 @@ config ZYNQ_GEM config PIC32_ETH bool "Microchip PIC32 Ethernet Support" - depends on DM_ETH && MACH_PIC32 + depends on MACH_PIC32 select PHYLIB help This driver implements 10/100 Mbps Ethernet and MAC layer for @@ -728,14 +694,14 @@ config PIC32_ETH config GMAC_ROCKCHIP bool "Rockchip Synopsys Designware Ethernet MAC" - depends on DM_ETH && ETH_DESIGNWARE + depends on ETH_DESIGNWARE help This driver provides Rockchip SoCs network support based on the Synopsys Designware driver. config RENESAS_RAVB bool "Renesas Ethernet AVB MAC" - depends on DM_ETH && RCAR_GEN3 + depends on RCAR_GEN3 select PHYLIB help This driver implements support for the Ethernet AVB block in @@ -753,7 +719,7 @@ config MPC8XX_FEC config SNI_AVE bool "Socionext AVE Ethernet support" - depends on DM_ETH && ARCH_UNIPHIER + depends on ARCH_UNIPHIER select PHYLIB select SYSCON select REGMAP @@ -763,7 +729,7 @@ config SNI_AVE config SNI_NETSEC bool "Socionext NETSEC Ethernet support" - depends on DM_ETH && SYNQUACER_SPI + depends on SYNQUACER_SPI select PHYLIB help This driver implements support for the Socionext SynQuacer NETSEC @@ -852,7 +818,6 @@ config TSEC_ENET config MEDIATEK_ETH bool "MediaTek Ethernet GMAC Driver" - depends on DM_ETH select PHYLIB select DM_GPIO select DM_RESET @@ -862,7 +827,6 @@ config MEDIATEK_ETH config HIGMACV300_ETH bool "HiSilicon Gigabit Ethernet Controller" - depends on DM_ETH select DM_RESET select PHYLIB help @@ -871,7 +835,7 @@ config HIGMACV300_ETH config FSL_ENETC bool "NXP ENETC Ethernet controller" - depends on DM_ETH && DM_MDIO + depends on DM_MDIO help This driver supports the NXP ENETC Ethernet controller found on some of the NXP SoCs. -- 2.39.5