From 7193653e8dddf8f232c19e16a4ca3c5052c71f09 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 12 Apr 2013 16:33:08 +0200
Subject: [PATCH] zynq: Move macros to hardware.h
Add all fixed addresses to hardware.h and change petalinux
configuration to support this.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>
---
arch/arm/include/asm/arch-zynq/hardware.h | 2 ++
board/xilinx/zynq/board.c | 12 +++++++++---
include/configs/zynq.h | 2 +-
3 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
index d8e378ff55..5820f3b922 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -27,6 +27,8 @@
#define ZYNQ_DEV_CFG_APB_BASEADDR 0xF8007000
#define ZYNQ_SCU_BASEADDR 0xF8F00000
#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600
+#define ZYNQ_GEM_BASEADDR0 0xE000B000
+#define ZYNQ_GEM_BASEADDR1 0xE000C000
/* Reflect slcr offsets */
struct slcr_regs {
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 8ed75c3d38..3af18f0d56 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -22,6 +22,8 @@
#include <common.h>
#include <netdev.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -38,10 +40,14 @@ int board_eth_init(bd_t *bis)
{
u32 ret = 0;
-#if defined(CONFIG_ZYNQ_GEM) && defined(CONFIG_ZYNQ_GEM_BASEADDR0)
- ret = zynq_gem_initialize(bis, CONFIG_ZYNQ_GEM_BASEADDR0);
+#if defined(CONFIG_ZYNQ_GEM)
+# if defined(CONFIG_ZYNQ_GEM0)
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0);
+# endif
+# if defined(CONFIG_ZYNQ_GEM1)
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1);
+# endif
#endif
-
return ret;
}
#endif
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index 11476894d3..ebe1b1bc05 100644
--- a/include/configs/zynq.h
+++ b/include/configs/zynq.h
@@ -53,7 +53,7 @@
/* Ethernet driver */
#define CONFIG_NET_MULTI
#define CONFIG_ZYNQ_GEM
-#define CONFIG_ZYNQ_GEM_BASEADDR0 0xE000B000
+#define CONFIG_ZYNQ_GEM0
#if defined(CONFIG_ZYNQ_DCC)
# define CONFIG_ARM_DCC
--
2.39.5