From 181c65b814b29a9e12f5fd034e259c891f3bbb64 Mon Sep 17 00:00:00 2001 From: Yangbo Lu <yangbo.lu@nxp.com> Date: Thu, 16 Jan 2020 13:19:44 +0800 Subject: [PATCH] configs: ls1028a: use default SDHC clock divider value The SDHC clock divider value for LS1028A should be default 2, not 1. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> --- configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 1 - configs/ls1028aqds_tfa_defconfig | 1 - configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 1 - configs/ls1028ardb_tfa_defconfig | 1 - 4 files changed, 4 deletions(-) diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig index 31e3b5a9b6..c80f8c7699 100644 --- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig @@ -4,7 +4,6 @@ CONFIG_TFABOOT=y CONFIG_SYS_MALLOC_F_LEN=0x6000 CONFIG_NXP_ESBC=y CONFIG_FSPI_AHB_EN_4BYTE=y -CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_ENV_SIZE=0x2000 CONFIG_NR_DRAM_BANKS=2 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig index 72922120e9..b3e3bcfe63 100644 --- a/configs/ls1028aqds_tfa_defconfig +++ b/configs/ls1028aqds_tfa_defconfig @@ -3,7 +3,6 @@ CONFIG_TARGET_LS1028AQDS=y CONFIG_TFABOOT=y CONFIG_SYS_MALLOC_F_LEN=0x6000 CONFIG_FSPI_AHB_EN_4BYTE=y -CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x500000 CONFIG_NR_DRAM_BANKS=2 diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig index db92204d98..02770b1064 100644 --- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig @@ -4,7 +4,6 @@ CONFIG_TFABOOT=y CONFIG_SYS_MALLOC_F_LEN=0x6000 CONFIG_NXP_ESBC=y CONFIG_FSPI_AHB_EN_4BYTE=y -CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_ENV_SIZE=0x2000 CONFIG_NR_DRAM_BANKS=2 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig index 41fe40a853..6715d310fa 100644 --- a/configs/ls1028ardb_tfa_defconfig +++ b/configs/ls1028ardb_tfa_defconfig @@ -3,7 +3,6 @@ CONFIG_TARGET_LS1028ARDB=y CONFIG_TFABOOT=y CONFIG_SYS_MALLOC_F_LEN=0x6000 CONFIG_FSPI_AHB_EN_4BYTE=y -CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x500000 CONFIG_NR_DRAM_BANKS=2 -- 2.39.5