From: Michal Simek Date: Wed, 27 Sep 2023 09:53:31 +0000 (+0200) Subject: arm64: zynqmp: Add support for vpk120-revA X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=fe90ce2368df2d83b01a7ed77b8105f110d63242;p=u-boot.git arm64: zynqmp: Add support for vpk120-revA Board contains two systems. The primary is Versal VP1202 ACAP device and the secondary is ZynqMP zu4 which acts as system controller. The patch is describing only ZynqMP system controller part. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/bd8b79d7c6693e90e12bce422f8ed00f2f43c9ae.1695808407.git.michal.simek@amd.com --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index d1b28a6d02..fbce328aca 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -421,6 +421,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-sck-kv-g-revA.dtbo \ zynqmp-sck-kv-g-revB.dtbo \ zynqmp-topic-miamimp-xilinx-xdp-v1r1.dtb \ + zynqmp-vpk120-revA.dtb \ zynqmp-zcu100-revC.dtb \ zynqmp-zcu102-revA.dtb \ zynqmp-zcu102-revB.dtb \ diff --git a/arch/arm/dts/zynqmp-vpk120-revA.dts b/arch/arm/dts/zynqmp-vpk120-revA.dts new file mode 100644 index 0000000000..66919f578e --- /dev/null +++ b/arch/arm/dts/zynqmp-vpk120-revA.dts @@ -0,0 +1,574 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx ZynqMP VPK120 RevA System Controller + * + * (C) Copyright 2021 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * + * Michal Simek + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include +#include +#include +#include + +/ { + model = "ZynqMP System Controller on VPK120 board RevA"; + compatible = "xlnx,zynqmp-vpk120-revA", + "xlnx,zynqmp-vpk120", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + serial0 = &uart0; + serial1 = &dcc; + spi0 = &qspi; + usb0 = &usb0; + usb1 = &usb1; + nvmem0 = &eeprom; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + sw16 { + label = "sw16"; + gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; + linux,code = ; + wakeup-source; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat-led { /* ds40 */ + label = "heartbeat"; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + si5332_0: si5332_0 { /* ps_ref_clk */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33333333>; + }; + + si5332_1: si5332_1 { /* clk0_sgmii */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33333333>; /* FIXME */ + }; + + si5332_2: si5332_2 { /* clk1_usb */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +&qspi { /* MIO 0-5 */ + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* mt25qu512abb8e12 512Mib */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + partition@0 { /* for testing purpose */ + label = "qspi"; + reg = <0 0x4000000>; + }; + }; +}; + +&sdhci0 { /* emmc MIO 13-23 - with some settings MTFC16GAPALBH 16GB */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio-bank = <0>; +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + bootph-all; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; /* DTG generates this properly 1512 */ + is-internal-pcspma; + /* phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; */ + /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */ + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */ + "QSPI_CS_B", "", "", "SYSCTLR_GPIO", "SYSCTLR_LED", /* 5 - 9 */ + "SYSCTLR_PB", "PMC_ZU4_TRIGGER", "", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */ + "", "", "", "", "", /* 25 - 29 */ + "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ + "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ + "", "", "ETH_RESET_B", "", "", /* 40 - 44 */ + "", "", "", "", "", /* 45 - 49 */ + "", "", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */ + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */ + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "", /* 60 - 64 */ + "", "", "", "", "", /* 65 - 69 */ + "", "", "", "", "", /* 70 - 74 */ + "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ + "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */ + "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "", "", /* 80 - 84 */ + "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "", /* 85 - 89 */ + "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */ + "SYSCTLR_GPIO5", "", "", "", "", /* 95 - 99 */ + "", "", "", "", "", /* 100 - 104 */ + "", "", "", "", "", /* 105 - 109 */ + "", "", "", "", "", /* 110 - 114 */ + "", "", "", "", "", /* 115 - 119 */ + "", "", "", "", "", /* 120 - 124 */ + "", "", "", "", "", /* 125 - 129 */ + "", "", "", "", "", /* 130 - 134 */ + "", "", "", "", "", /* 135 - 139 */ + "", "", "", "", "", /* 140 - 144 */ + "", "", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 173 */ +}; + +&i2c0 { /* MIO 34-35 - can't stay here */ + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 34 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 35 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + tca6416_u233: gpio@20 { /* u233 */ /* FIXME - address maybe wrong */ + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; /* interrupt not connected */ + #gpio-cells = <2>; + gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "QSFPDD1_MODSELL", "QSFPDD1_MODSELL", /* 0 - 3 */ + "PMBUS2_INA226_ALERT", "", "", "MAX6643_FULL_SPEED", /* 4 - 7 */ + "FMCP1_FMC_PRSNT_M2C_B", "", "FMCP1_FMCP_PRSNT_M2C_B", "", /* 10 - 13 */ + "VCCINT_VRHOT_B", "8A34001_EXP_RST_B", "PMBUS_ALERT", "PMBUS1_INA226_ALERT"; /* 14 - 17 */ + }; + + i2c-mux@74 { /* u33 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */ + pmbus_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* On connector J325 */ + ir38060_41: regulator@41 { /* IR38060 - u259 */ + compatible = "infineon,ir38060", "infineon,ir38064"; + reg = <0x41>; /* i2c addr 0x11 */ + }; + ir38164_43: regulator@43 { /* IR38164 - u13 */ + compatible = "infineon,ir38164"; + reg = <0x43>; /* i2c addr 0x13 */ + }; + ir35221_45: pmic@46 { /* IR35221 - u152 */ + compatible = "infineon,ir35221"; + reg = <0x46>; /* PMBUS - 0x16 */ + }; + irps5401_47: pmic5401@47 { /* IRPS5401 - u160 */ + compatible = "infineon,irps5401"; + reg = <0x47>; /* i2c addr 0x17 */ + }; + ir38164_49: regulator@49 { /* IR38164 - u189 */ + compatible = "infineon,ir38164"; + reg = <0x49>; /* i2c addr 0x19 */ + }; + irps5401_4c: pmic@4c { /* IRPS5401 - u167 */ + compatible = "infineon,irps5401"; + reg = <0x4c>; /* i2c addr 0x1c */ + }; + irps5401_4d: pmic@4d { /* IRPS5401 - u175 */ + compatible = "infineon,irps5401"; + reg = <0x4d>; /* i2c addr 0x1c */ + }; + ir38164_4e: regulator@4e { /* IR38164 - u184 */ + compatible = "infineon,ir38164"; + reg = <0x4e>; /* i2c addr 0x1e */ + }; + ir38164_4f: regulator@4f { /* IR38164 - u187 */ + compatible = "infineon,ir38164"; + reg = <0x4f>; /* i2c addr 0x1f */ + }; + }; + pmbus1_ina226_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* FIXME check alerts coming to SC */ + vccint: ina226@40 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + vcc_soc: ina226@41 { /* u161 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + vcc_pmc: ina226@42 { /* u163 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + vcc_ram: ina226@43 { /* u5 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vcc_pslp: ina226@44 { /* u165 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + vcc_psfp: ina226@45 { /* u164 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { /* NC */ /* FIXME maybe remove */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + pmbus2_ina226_i2c: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* FIXME check alerts coming to SC */ + vccaux: ina226@40 { /* u166 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + vccaux_pmc: ina226@41 { /* u168 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + mgtavcc: ina226@42 { /* u265 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + vcc1v5: ina226@43 { /* u264 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vcco_mio: ina226@45 { /* u172 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + mgtavtt: ina226@46 { /* u188 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <2000>; + }; + vcco_502: ina226@47 { /* u174 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + mgtvccaux: ina226@48 { /* u176 */ + compatible = "ti,ina226"; + reg = <0x48>; + shunt-resistor = <5000>; + }; + vcc1v1_lp4: ina226@49 { /* u186 */ + compatible = "ti,ina226"; + reg = <0x49>; + shunt-resistor = <2000>; + }; + vadj_fmc: ina226@4a { /* u184 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <2000>; + }; + lpdmgtyavcc: ina226@4b { /* u177 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + lpdmgtyavtt: ina226@4c { /* u260 */ + compatible = "ti,ina226"; + reg = <0x4c>; + shunt-resistor = <2000>; + }; + lpdmgtyvccaux: ina226@4d { /* u234 */ + compatible = "ti,ina226"; + reg = <0x4d>; + shunt-resistor = <5000>; + }; + }; + i2c@4 { /* NC */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + i2c@5 { /* NC */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + user_si570: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + user_si570_1: clock-generator@5f { /* USER C0 SI570 - u205 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5f>; + temperature-stability = <50>; + factory-fout = <100000000>; + clock-frequency = <100000000>; + clock-output-names = "fmc_si570"; + }; + + }; + /* 7 unused */ + }; +}; + +&i2c1 { /* i2c1 MIO 36-37 */ + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 36 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 37 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + i2c-mux@74 { /* u35 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */ + ref_clk_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom: eeprom@54 { /* u34 - m24128 16kB */ + compatible = "st,24c128", "atmel,24c128"; + reg = <0x54>; /* & 0x5c */ + }; + ref_clk: clock-generator@5d { /* u32 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <33333333>; + clock-frequency = <33333333>; + clock-output-names = "ref_clk"; + silabs,skip-recall; + }; + }; + fmcp1_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* FIXME connection to Samtec J51C */ + /* expected eeprom 0x50 SE cards */ + }; + i2c@2 { /* NC - FIXME */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + lpddr4_si570_clk3_i2c: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + lpddr4_clk3: clock-generator@60 { /* u4 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; + temperature-stability = <50>; + factory-fout = <200000000>; + clock-frequency = <200000000>; + clock-output-names = "lpddr4_clk3"; + }; + }; + lpddr4_si570_clk2_i2c: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + lpddr4_clk2: clock-generator@60 { /* u3 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; + temperature-stability = <50>; + factory-fout = <200000000>; + clock-frequency = <200000000>; + clock-output-names = "lpddr4_clk2"; + }; + }; + lpddr4_si570_clk1_i2c: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + lpddr4_clk1: clock-generator@60 { /* u248 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; + temperature-stability = <50>; + factory-fout = <200000000>; + clock-frequency = <200000000>; + clock-output-names = "lpddr4_clk1"; + }; + }; + qsfpdd_i2c: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* J1/J2 connectors */ + }; + idt8a34001_i2c: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* Via J310 connector */ + idt_8a34001: phc@5b { + compatible = "idt,8a34001"; /* u219B */ + reg = <0x5b>; /* FIXME not in schematics */ + }; + }; + }; +}; + +&usb0 { /* MIO52 - MIO63 */ + status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 1 PHY_TYPE_USB3 0 1>; +}; + +&psgtr { + status = "okay"; + /* sgmii, usb3 */ + clocks = <&si5332_1>, <&si5332_2>; + clock-names = "ref0", "ref1"; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "peripheral"; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + maximum-speed = "super-speed"; +}; + +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + +&ams_pl { + status = "okay"; +}; + +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_8_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_8_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_34_grp", "gpio0_35_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_34_grp", "gpio0_35_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_9_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_9_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_36_grp", "gpio0_37_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_36_grp", "gpio0_37_grp"; + slew-rate = ; + power-source = ; + }; + }; +};