From: Michael Walle Date: Wed, 13 Oct 2021 16:14:05 +0000 (+0200) Subject: arm: dts: ls1028a: move I2C controller nodes into /soc X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=fb19c6b15999cc9a2278fe1eaf62dc0fcae6d4b9;p=u-boot.git arm: dts: ls1028a: move I2C controller nodes into /soc While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by: Michael Walle Reviewed-by: Vladimir Oltean Reviewed-by: Priyanka Jain --- diff --git a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi index 4063d9a114..1f13cf80e6 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi @@ -16,5 +16,5 @@ &enetc0 { status = "okay"; phy-mode = "usxgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi index 548ab2ba65..10375b2751 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi @@ -15,5 +15,5 @@ &enetc0 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi index 3991fb793f..f18cb39f21 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi @@ -31,25 +31,25 @@ &mscc_felix_port0 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@00}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@00}>; }; &mscc_felix_port1 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@01}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@01}>; }; &mscc_felix_port2 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; }; &mscc_felix_port3 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; }; &mscc_felix_port4 { diff --git a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi index d68c8c2be0..f6561a89eb 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi @@ -20,13 +20,13 @@ &mscc_felix_port0 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; }; &mscc_felix_port3 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; }; &mscc_felix_port4 { diff --git a/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi index 94b5081d61..d9ccd8353b 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi @@ -15,5 +15,5 @@ &enetc0 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi index 3b850268e6..0630f12069 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi @@ -45,25 +45,25 @@ &mscc_felix_port0 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; }; &mscc_felix_port1 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@1c}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@1c}>; }; &mscc_felix_port2 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>; }; &mscc_felix_port3 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>; }; &mscc_felix_port4 { diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi index eb632143e0..170aacf8c0 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi @@ -30,25 +30,25 @@ &mscc_felix_port0 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; }; &mscc_felix_port1 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1d}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1d}>; }; &mscc_felix_port2 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>; }; &mscc_felix_port3 { status = "okay"; phy-mode = "sgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>; }; &mscc_felix_port4 { diff --git a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi index ed86da6b26..1a9288a037 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi @@ -30,25 +30,25 @@ &mscc_felix_port0 { status = "okay"; phy-mode = "usxgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@00}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@00}>; }; &mscc_felix_port1 { status = "okay"; phy-mode = "usxgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@01}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@01}>; }; &mscc_felix_port2 { status = "okay"; phy-mode = "usxgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>; }; &mscc_felix_port3 { status = "okay"; phy-mode = "usxgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>; }; &mscc_felix_port4 { diff --git a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi index c9de4ecc43..544f548b1a 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi @@ -24,25 +24,25 @@ &mscc_felix_port0 { status = "okay"; phy-mode = "qsgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@08}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@08}>; }; &mscc_felix_port1 { status = "okay"; phy-mode = "qsgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@09}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@09}>; }; &mscc_felix_port2 { status = "okay"; phy-mode = "qsgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0a}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0a}>; }; &mscc_felix_port3 { status = "okay"; phy-mode = "qsgmii"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>; }; &mscc_felix_port4 { diff --git a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi index 7f785507bf..639796263c 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi @@ -20,7 +20,7 @@ &mscc_felix_port1 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>; }; &mscc_felix_port4 { diff --git a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi index 0fbe7721c8..62c5513c2c 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi @@ -20,7 +20,7 @@ &mscc_felix_port2 { status = "okay"; phy-mode = "2500base-x"; - phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@60/phy@02}>; + phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@60/phy@02}>; }; &mscc_felix_port4 { diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index 54f97014be..de85fdd045 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -203,94 +203,6 @@ }; }; - i2c0: i2c@2000000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2000000 0x0 0x10000>; - interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; - - i2c1: i2c@2010000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2010000 0x0 0x10000>; - interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; - - i2c2: i2c@2020000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2020000 0x0 0x10000>; - interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; - - i2c3: i2c@2030000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2030000 0x0 0x10000>; - interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; - - i2c4: i2c@2040000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2040000 0x0 0x10000>; - interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; - - i2c5: i2c@2050000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2050000 0x0 0x10000>; - interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; - - i2c6: i2c@2060000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2060000 0x0 0x10000>; - interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; - - i2c7: i2c@2070000 { - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2070000 0x0 0x10000>; - interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; - status = "disabled"; - }; - lpuart0: serial@2260000 { compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2260000 0x0 0x1000>; @@ -484,5 +396,93 @@ #clock-cells = <2>; clocks = <&sysclk>; }; + + i2c0: i2c@2000000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c1: i2c@2010000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c2: i2c@2020000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c3: i2c@2030000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c4: i2c@2040000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2040000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c5: i2c@2050000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2050000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c6: i2c@2060000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2060000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c7: i2c@2070000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2070000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; }; };