From: Marek Vasut <marek.vasut+renesas@mailbox.org>
Date: Sat, 26 Oct 2024 20:16:25 +0000 (+0200)
Subject: mtd: spi-nor: Rename SPI_ADVANCE to SPI_STACKED_PARALLEL
X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=f896aa656774821fee44f0da3fdd7e52068130da;p=u-boot.git

mtd: spi-nor: Rename SPI_ADVANCE to SPI_STACKED_PARALLEL

The SPI_ADVANCE description does not explain what the switch does.
It does not have anything to do with any advanced functionality, it
only gates off support for stacked and parallel SPI NORs. Rename the
Kconfig symbol, update description, and move it right next to Xilinx
hardware as it seems to be specific to this hardware. Make sure the
symbol is also protected by if DM_SPI in Kconfig.

Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
---

diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index c1ee466bcc..74aec6b60c 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -3047,7 +3047,7 @@ static int spi_nor_init_params(struct spi_nor *nor,
 			       const struct flash_info *info,
 			       struct spi_nor_flash_parameter *params)
 {
-#if CONFIG_IS_ENABLED(DM_SPI) && CONFIG_IS_ENABLED(SPI_ADVANCE)
+#if CONFIG_IS_ENABLED(DM_SPI) && CONFIG_IS_ENABLED(SPI_STACKED_PARALLEL)
 	struct udevice *dev = nor->spi->dev;
 	u64 flash_size[SNOR_FLASH_CNT_MAX] = {0};
 	u32 idx = 0, i = 0;
@@ -3172,7 +3172,7 @@ static int spi_nor_init_params(struct spi_nor *nor,
 
 		spi_nor_post_sfdp_fixups(nor, params);
 	}
-#if CONFIG_IS_ENABLED(DM_SPI) && CONFIG_IS_ENABLED(SPI_ADVANCE)
+#if CONFIG_IS_ENABLED(DM_SPI) && CONFIG_IS_ENABLED(SPI_STACKED_PARALLEL)
 	/*
 	 * The flashes that are connected in stacked mode should be of same make.
 	 * Except the flash size all other properties are identical for all the
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index fa817ec488..fd5cb3694f 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -20,12 +20,6 @@ menuconfig SPI
 
 if SPI
 
-config SPI_ADVANCE
-	bool "Enable the advance feature"
-	help
-	 Enable the SPI advance feature support. By default this is disabled.
-	 If you intend to use the advance feature support you should enable.
-
 config DM_SPI
 	bool "Enable Driver Model for SPI drivers"
 	depends on DM
@@ -615,6 +609,12 @@ config ZYNQMP_GQSPI
 	  This option is used to enable ZynqMP QSPI controller driver which
 	  is used to communicate with qspi flash devices.
 
+config SPI_STACKED_PARALLEL
+	bool "Enable support for stacked or parallel memories"
+	help
+	 Enable support for stacked/or parallel memories. This functionality
+	 may appear on Xilinx hardware. By default this is disabled.
+
 endif # if DM_SPI
 
 config FSL_ESPI
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 655a6d197e..b8b207f7b5 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -308,7 +308,7 @@ enum spi_nor_option_flags {
 	SNOR_F_BROKEN_RESET	= BIT(6),
 	SNOR_F_SOFT_RESET	= BIT(7),
 	SNOR_F_IO_MODE_EN_VOLATILE = BIT(8),
-#if defined(CONFIG_SPI_ADVANCE)
+#if defined(CONFIG_SPI_STACKED_PARALLEL)
 	SNOR_F_HAS_STACKED	= BIT(9),
 	SNOR_F_HAS_PARALLEL	= BIT(10),
 #else