From: Wolfgang Wallner Date: Wed, 1 Jul 2020 11:37:23 +0000 (+0200) Subject: drivers: p2sb: replace Primary-to-Sideband Bus with Primary to Sideband Bridge X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=d872e7da7a7e5c7199fa59506e08524277621649;p=u-boot.git drivers: p2sb: replace Primary-to-Sideband Bus with Primary to Sideband Bridge In Intel's documentation the term P2SB stands for "Primary to Sideband Bridge". Signed-off-by: Wolfgang Wallner Reviewed-by: Simon Glass Reviewed-by: Bin Meng --- diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 6bb5bc77e9..b67e906a76 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -243,10 +243,10 @@ config NUVOTON_NCT6102D in the Nuvoton Super IO chips on X86 platforms. config P2SB - bool "Intel Primary-to-Sideband Bus" + bool "Intel Primary to Sideband Bridge" depends on X86 || SANDBOX help - This enables support for the Intel Primary-to-Sideband bus, + This enables support for the Intel Primary to Sideband Bridge, abbreviated to P2SB. The P2SB is used to access various peripherals such as eSPI, GPIO, through memory-mapped I/O in a large chunk of PCI space. The space is segmented into different channels and peripherals @@ -256,20 +256,20 @@ config P2SB devices - see pcr_readl(), etc. config SPL_P2SB - bool "Intel Primary-to-Sideband Bus in SPL" + bool "Intel Primary to Sideband Bridge in SPL" depends on SPL && (X86 || SANDBOX) help - The Primary-to-Sideband bus is used to access various peripherals + The Primary to Sideband Bridge is used to access various peripherals through memory-mapped I/O in a large chunk of PCI space. The space is segmented into different channels and peripherals are accessed by device-specific means within those channels. Devices should be added in the device tree as subnodes of the p2sb. config TPL_P2SB - bool "Intel Primary-to-Sideband Bus in TPL" + bool "Intel Primary to Sideband Bridge in TPL" depends on TPL && (X86 || SANDBOX) help - The Primary-to-Sideband bus is used to access various peripherals + The Primary to Sideband Bridge is used to access various peripherals through memory-mapped I/O in a large chunk of PCI space. The space is segmented into different channels and peripherals are accessed by device-specific means within those channels. Devices should be added