From: Patrick Delaunay Date: Thu, 25 Nov 2021 10:54:53 +0000 (+0100) Subject: board: stm32mp1: add support of nor1 device in dfu command X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=c7c06fa776b3a553df922259908fad12cfa0e1e8;p=u-boot.git board: stm32mp1: add support of nor1 device in dfu command Add support of mtd backend for nor1 when this device is present on the board, on STM32MP157C-EV1 for example, as the support of several MTD spi-nor instance are now supported with commit b7f060565e31 ("mtd: spi-nor: allow registering multiple MTDs when DM is enabled"). Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/board/st/common/stm32mp_dfu.c b/board/st/common/stm32mp_dfu.c index 00d1fb8f59..a3f0da5b5b 100644 --- a/board/st/common/stm32mp_dfu.c +++ b/board/st/common/stm32mp_dfu.c @@ -132,6 +132,10 @@ void set_dfu_alt_info(char *interface, char *devstr) mtd = get_mtd_device_nm("nor0"); if (!IS_ERR_OR_NULL(mtd)) board_get_alt_info_mtd(mtd, buf); + + mtd = get_mtd_device_nm("nor1"); + if (!IS_ERR_OR_NULL(mtd)) + board_get_alt_info_mtd(mtd, buf); } mtd = get_mtd_device_nm("nand0"); diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst index 42bb94148d..0c5d3a90f0 100644 --- a/doc/board/st/stm32mp1.rst +++ b/doc/board/st/stm32mp1.rst @@ -645,16 +645,18 @@ On EV1 board, booting from SD card, without OP-TEE_:: dev: eMMC alt: 15 name: mmc1_rootfs layout: RAW_ADDR dev: eMMC alt: 16 name: mmc1_userfs layout: RAW_ADDR dev: MTD alt: 17 name: nor0 layout: RAW_ADDR - dev: MTD alt: 18 name: nand0 layout: RAW_ADDR - dev: VIRT alt: 19 name: OTP layout: RAW_ADDR - dev: VIRT alt: 20 name: PMIC layout: RAW_ADDR + dev: MTD alt: 18 name: nor1 layout: RAW_ADDR + dev: MTD alt: 19 name: nand0 layout: RAW_ADDR + dev: VIRT alt: 20 name: OTP layout: RAW_ADDR + dev: VIRT alt: 21 name: PMIC layout: RAW_ADDR All the supported device are exported for dfu-util tool:: $> dfu-util -l - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="PMIC", serial="002700333338511934383330" - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="OTP", serial="002700333338511934383330" - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nand0", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=21, name="PMIC", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="OTP", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="nand0", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nor1", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=17, name="nor0", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=16, name="mmc1_userfs", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=15, name="mmc1_rootfs", serial="002700333338511934383330" @@ -705,12 +707,12 @@ You can update the boot device: When the board is booting for nor0 or nand0, only the MTD partition on the boot devices are available, for example: -- NOR (nor0 = alt 20) & NAND (nand0 = alt 26) :: +- NOR (nor0 = alt 20, nor1 = alt 26) & NAND (nand0 = alt 27) : $> dfu-util -d 0483:5720 -a 21 -D tf-a-stm32mp157c-ev1.stm32 $> dfu-util -d 0483:5720 -a 22 -D tf-a-stm32mp157c-ev1.stm32 $> dfu-util -d 0483:5720 -a 23 -D fip-stm32mp157c-ev1.bin - $> dfu-util -d 0483:5720 -a 27 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi + $> dfu-util -d 0483:5720 -a 28 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi - NAND (nand0 = alt 21)::