From: Ovidiu Panait Date: Tue, 30 Nov 2021 16:33:55 +0000 (+0200) Subject: microblaze: add Kconfig symbol for the vector base address X-Git-Tag: v2025.01-rc5-pxa1908~1573^2~20 X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=b6aef109799614f1efa921bdb8a73e461d9bcbdd;p=u-boot.git microblaze: add Kconfig symbol for the vector base address MicroBlaze vector base address is configurable (hdl C_BASE_VECTORS configuration parameter). Current code assumes that the reset vector location is always 0x0. Add the XILINX_MICROBLAZE0_VECTOR_BASE_ADDR Kconfig option so the user can adjust the reset vector address. Signed-off-by: Ovidiu Panait Link: https://lore.kernel.org/r/20211130163358.2531677-8-ovidiu.panait@windriver.com Signed-off-by: Michal Simek --- diff --git a/board/xilinx/microblaze-generic/Kconfig b/board/xilinx/microblaze-generic/Kconfig index 3e3eca0e80..e31257d335 100644 --- a/board/xilinx/microblaze-generic/Kconfig +++ b/board/xilinx/microblaze-generic/Kconfig @@ -47,4 +47,11 @@ config XILINX_MICROBLAZE0_USR_EXCEP the exception vector table. The user exception vector is located at C_BASE_VECTORS + 0x8 address. +config XILINX_MICROBLAZE0_VECTOR_BASE_ADDR + hex "Location of MicroBlaze vectors" + default 0x0 + help + Memory address location of the exception vector table. It is + configurable via the C_BASE_VECTORS hdl parameter. + endif