From: Tom Rini Date: Fri, 19 Apr 2024 13:28:43 +0000 (-0600) Subject: Merge tag 'u-boot-stm32-20240419' of https://source.denx.de/u-boot/custodians/u-boot-stm X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=af04f37a78c7e61597fb9ed6db2c8f8d7f8b0f92;p=u-boot.git Merge tag 'u-boot-stm32-20240419' of https://source.denx.de/u-boot/custodians/u-boot-stm MP1: _ Add OHCI HCD support for STM32MP15xx DHSOM _ Report OTP-CLOSED instead of rev.? on closed STM32MP15xx _ Initialize TAMP_SMCR BKP..PROT fields on STM32MP15xx _ Jump to ep on successful resume in PSCI suspend code _ Add FASTBOOT support for STM32MP13 _ Fix/Rework key and leds management for STM32MP13/15 _ net: dwc_eth_qos: Clean up STM32 glue code and add STM32MP13xx support MP2: _ Add stm32-fmc-ebi support _ Add: sdmmc2 support and fix AARCH64 compilation --- af04f37a78c7e61597fb9ed6db2c8f8d7f8b0f92 diff --cc drivers/net/dwc_eth_qos_stm32.c index 0000000000,9ee82b54c6..fbc08bba1d mode 000000,100644..100644 --- a/drivers/net/dwc_eth_qos_stm32.c +++ b/drivers/net/dwc_eth_qos_stm32.c @@@ -1,0 -1,326 +1,325 @@@ + // SPDX-License-Identifier: GPL-2.0 + /* + * Copyright (C) 2024, Marek Vasut + * + * This is code moved from drivers/net/dwc_eth_qos.c , which is: + * Copyright (c) 2016, NVIDIA CORPORATION. + */ + -#include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + + #include "dwc_eth_qos.h" + + /* SYSCFG registers */ + #define SYSCFG_PMCSETR 0x04 + #define SYSCFG_PMCCLRR_MP13 0x08 + #define SYSCFG_PMCCLRR_MP15 0x44 + + #define SYSCFG_PMCSETR_ETH1_MASK GENMASK(23, 16) + #define SYSCFG_PMCSETR_ETH2_MASK GENMASK(31, 24) + + #define SYSCFG_PMCSETR_ETH_CLK_SEL BIT(16) + #define SYSCFG_PMCSETR_ETH_REF_CLK_SEL BIT(17) + + /* STM32MP15xx specific bit */ + #define SYSCFG_PMCSETR_ETH_SELMII BIT(20) + + #define SYSCFG_PMCSETR_ETH_SEL_MASK GENMASK(23, 21) + #define SYSCFG_PMCSETR_ETH_SEL_GMII_MII 0x0 + #define SYSCFG_PMCSETR_ETH_SEL_RGMII 0x1 + #define SYSCFG_PMCSETR_ETH_SEL_RMII 0x4 + + static ulong eqos_get_tick_clk_rate_stm32(struct udevice *dev) + { + struct eqos_priv __maybe_unused *eqos = dev_get_priv(dev); + + if (!CONFIG_IS_ENABLED(CLK)) + return 0; + + return clk_get_rate(&eqos->clk_master_bus); + } + + static int eqos_start_clks_stm32(struct udevice *dev) + { + struct eqos_priv __maybe_unused *eqos = dev_get_priv(dev); + int ret; + + if (!CONFIG_IS_ENABLED(CLK)) + return 0; + + dev_dbg(dev, "%s:\n", __func__); + + ret = clk_enable(&eqos->clk_master_bus); + if (ret < 0) { + dev_err(dev, "clk_enable(clk_master_bus) failed: %d\n", ret); + goto err; + } + + ret = clk_enable(&eqos->clk_rx); + if (ret < 0) { + dev_err(dev, "clk_enable(clk_rx) failed: %d\n", ret); + goto err_disable_clk_master_bus; + } + + ret = clk_enable(&eqos->clk_tx); + if (ret < 0) { + dev_err(dev, "clk_enable(clk_tx) failed: %d\n", ret); + goto err_disable_clk_rx; + } + + if (clk_valid(&eqos->clk_ck) && !eqos->clk_ck_enabled) { + ret = clk_enable(&eqos->clk_ck); + if (ret < 0) { + dev_err(dev, "clk_enable(clk_ck) failed: %d\n", ret); + goto err_disable_clk_tx; + } + eqos->clk_ck_enabled = true; + } + + dev_dbg(dev, "%s: OK\n", __func__); + return 0; + + err_disable_clk_tx: + clk_disable(&eqos->clk_tx); + err_disable_clk_rx: + clk_disable(&eqos->clk_rx); + err_disable_clk_master_bus: + clk_disable(&eqos->clk_master_bus); + err: + dev_dbg(dev, "%s: FAILED: %d\n", __func__, ret); + + return ret; + } + + static int eqos_stop_clks_stm32(struct udevice *dev) + { + struct eqos_priv __maybe_unused *eqos = dev_get_priv(dev); + + if (!CONFIG_IS_ENABLED(CLK)) + return 0; + + dev_dbg(dev, "%s:\n", __func__); + + clk_disable(&eqos->clk_tx); + clk_disable(&eqos->clk_rx); + clk_disable(&eqos->clk_master_bus); + + dev_dbg(dev, "%s: OK\n", __func__); + + return 0; + } + + static int eqos_probe_syscfg_stm32(struct udevice *dev, + phy_interface_t interface_type) + { + /* Ethernet 50MHz RMII clock selection. */ + const bool eth_ref_clk_sel = dev_read_bool(dev, "st,eth-ref-clk-sel"); + /* SoC is STM32MP13xx with two ethernet MACs */ + const bool is_mp13 = device_is_compatible(dev, "st,stm32mp13-dwmac"); + /* Gigabit Ethernet 125MHz clock selection. */ + const bool eth_clk_sel = dev_read_bool(dev, "st,eth-clk-sel"); + /* Ethernet clock source is RCC. */ + const bool ext_phyclk = dev_read_bool(dev, "st,ext-phyclk"); + struct regmap *regmap; + u32 regmap_mask; + u32 value; + + regmap = syscon_regmap_lookup_by_phandle(dev, "st,syscon"); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + regmap_mask = dev_read_u32_index_default(dev, "st,syscon", 2, + SYSCFG_PMCSETR_ETH1_MASK); + + switch (interface_type) { + case PHY_INTERFACE_MODE_MII: + dev_dbg(dev, "PHY_INTERFACE_MODE_MII\n"); + value = FIELD_PREP(SYSCFG_PMCSETR_ETH_SEL_MASK, + SYSCFG_PMCSETR_ETH_SEL_GMII_MII); + /* + * STM32MP15xx supports both MII and GMII, STM32MP13xx MII only. + * SYSCFG_PMCSETR ETH_SELMII is present only on STM32MP15xx and + * acts as a selector between 0:GMII and 1:MII. As STM32MP13xx + * supports only MII, ETH_SELMII is not present. + */ + if (!is_mp13) /* Select MII mode on STM32MP15xx */ + value |= SYSCFG_PMCSETR_ETH_SELMII; + break; + case PHY_INTERFACE_MODE_GMII: /* STM32MP15xx only */ + dev_dbg(dev, "PHY_INTERFACE_MODE_GMII\n"); + value = FIELD_PREP(SYSCFG_PMCSETR_ETH_SEL_MASK, + SYSCFG_PMCSETR_ETH_SEL_GMII_MII); + /* + * If eth_clk_sel is set, use internal ETH_CLKx clock from RCC, + * otherwise use external clock from IO pin (requires matching + * GPIO block AF setting of that pin). + */ + if (eth_clk_sel || ext_phyclk) + value |= SYSCFG_PMCSETR_ETH_CLK_SEL; + break; + case PHY_INTERFACE_MODE_RMII: + dev_dbg(dev, "PHY_INTERFACE_MODE_RMII\n"); + value = FIELD_PREP(SYSCFG_PMCSETR_ETH_SEL_MASK, + SYSCFG_PMCSETR_ETH_SEL_RMII); + /* + * If eth_ref_clk_sel is set, use internal clock from RCC, + * otherwise use external clock from ETHn_RX_CLK/ETHn_REF_CLK + * IO pin (requires matching GPIO block AF setting of that + * pin). + */ + if (eth_ref_clk_sel || ext_phyclk) + value |= SYSCFG_PMCSETR_ETH_REF_CLK_SEL; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + dev_dbg(dev, "PHY_INTERFACE_MODE_RGMII\n"); + value = FIELD_PREP(SYSCFG_PMCSETR_ETH_SEL_MASK, + SYSCFG_PMCSETR_ETH_SEL_RGMII); + /* + * If eth_clk_sel is set, use internal ETH_CLKx clock from RCC, + * otherwise use external clock from ETHx_CLK125 pin (requires + * matching GPIO block AF setting of that pin). + */ + if (eth_clk_sel || ext_phyclk) + value |= SYSCFG_PMCSETR_ETH_CLK_SEL; + break; + default: + dev_dbg(dev, "Do not manage %d interface\n", + interface_type); + /* Do not manage others interfaces */ + return -EINVAL; + } + + /* Shift value at correct ethernet MAC offset in SYSCFG_PMCSETR */ + value <<= ffs(regmap_mask) - ffs(SYSCFG_PMCSETR_ETH1_MASK); + + /* Update PMCCLRR (clear register) */ + regmap_write(regmap, is_mp13 ? + SYSCFG_PMCCLRR_MP13 : SYSCFG_PMCCLRR_MP15, + regmap_mask); + + return regmap_update_bits(regmap, SYSCFG_PMCSETR, regmap_mask, value); + } + + static int eqos_probe_resources_stm32(struct udevice *dev) + { + struct eqos_priv *eqos = dev_get_priv(dev); + phy_interface_t interface; + int ret; + + dev_dbg(dev, "%s:\n", __func__); + + interface = eqos->config->interface(dev); + + if (interface == PHY_INTERFACE_MODE_NA) { + dev_err(dev, "Invalid PHY interface\n"); + return -EINVAL; + } + + ret = eqos_probe_syscfg_stm32(dev, interface); + if (ret) + return -EINVAL; + + ret = clk_get_by_name(dev, "stmmaceth", &eqos->clk_master_bus); + if (ret) { + dev_err(dev, "clk_get_by_name(master_bus) failed: %d\n", ret); + goto err_probe; + } + + ret = clk_get_by_name(dev, "mac-clk-rx", &eqos->clk_rx); + if (ret) { + dev_err(dev, "clk_get_by_name(rx) failed: %d\n", ret); + goto err_probe; + } + + ret = clk_get_by_name(dev, "mac-clk-tx", &eqos->clk_tx); + if (ret) { + dev_err(dev, "clk_get_by_name(tx) failed: %d\n", ret); + goto err_probe; + } + + /* Get ETH_CLK clocks (optional) */ + ret = clk_get_by_name(dev, "eth-ck", &eqos->clk_ck); + if (ret) + dev_warn(dev, "No phy clock provided %d\n", ret); + + dev_dbg(dev, "%s: OK\n", __func__); + + return 0; + + err_probe: + + dev_dbg(dev, "%s: returns %d\n", __func__, ret); + + return ret; + } + + static int eqos_remove_resources_stm32(struct udevice *dev) + { + dev_dbg(dev, "%s:\n", __func__); + + return 0; + } + + static struct eqos_ops eqos_stm32_ops = { + .eqos_inval_desc = eqos_inval_desc_generic, + .eqos_flush_desc = eqos_flush_desc_generic, + .eqos_inval_buffer = eqos_inval_buffer_generic, + .eqos_flush_buffer = eqos_flush_buffer_generic, + .eqos_probe_resources = eqos_probe_resources_stm32, + .eqos_remove_resources = eqos_remove_resources_stm32, + .eqos_stop_resets = eqos_null_ops, + .eqos_start_resets = eqos_null_ops, + .eqos_stop_clks = eqos_stop_clks_stm32, + .eqos_start_clks = eqos_start_clks_stm32, + .eqos_calibrate_pads = eqos_null_ops, + .eqos_disable_calibration = eqos_null_ops, + .eqos_set_tx_clk_speed = eqos_null_ops, + .eqos_get_enetaddr = eqos_null_ops, + .eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_stm32 + }; + + struct eqos_config __maybe_unused eqos_stm32mp13_config = { + .reg_access_always_ok = false, + .mdio_wait = 10000, + .swr_wait = 50, + .config_mac = EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_DCB, + .config_mac_mdio = EQOS_MAC_MDIO_ADDRESS_CR_250_300, + .axi_bus_width = EQOS_AXI_WIDTH_32, + .interface = dev_read_phy_mode, + .ops = &eqos_stm32_ops + }; + + struct eqos_config __maybe_unused eqos_stm32mp15_config = { + .reg_access_always_ok = false, + .mdio_wait = 10000, + .swr_wait = 50, + .config_mac = EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_AV, + .config_mac_mdio = EQOS_MAC_MDIO_ADDRESS_CR_250_300, + .axi_bus_width = EQOS_AXI_WIDTH_64, + .interface = dev_read_phy_mode, + .ops = &eqos_stm32_ops + };