From: Tim Harvey Date: Tue, 8 Mar 2022 00:24:03 +0000 (-0800) Subject: board: gateworks: gw_ventana: move ft_early_fixups out of common X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=6bec6c169ff5f5c00e58d451c6afa90f89dc6903;p=u-boot.git board: gateworks: gw_ventana: move ft_early_fixups out of common DM is not used for the SPL and a generic DT is used in the SPL which requires no fixups. Remove the call in the SPL and move the function into the U-Boot code. Signed-off-by: Tim Harvey --- diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 725f948b87..414406461e 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -1209,154 +1209,6 @@ void setup_iomux_gpio(int board, struct ventana_board_info *info) } } -#include -#define WDOG1_ADDR 0x20bc000 -#define WDOG2_ADDR 0x20c0000 -#define GPIO3_ADDR 0x20a4000 -#define USDHC3_ADDR 0x2198000 - -static void ft_board_wdog_fixup(void *blob, phys_addr_t addr) -{ - int off = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", addr); - - if (off) { - fdt_delprop(blob, off, "ext-reset-output"); - fdt_delprop(blob, off, "fsl,ext-reset-output"); - } -} - -void ft_early_fixup(void *blob, int board_type) -{ - struct ventana_board_info *info = &ventana_info; - char rev = 0; - int i; - - /* determine board revision */ - for (i = sizeof(ventana_info.model) - 1; i > 0; i--) { - if (ventana_info.model[i] >= 'A') { - rev = ventana_info.model[i]; - break; - } - } - - /* - * Board model specific fixups - */ - switch (board_type) { - case GW51xx: - /* - * disable wdog node for GW51xx-A/B to work around - * errata causing wdog timer to be unreliable. - */ - if (rev >= 'A' && rev < 'C') { - i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", - WDOG1_ADDR); - if (i) - fdt_status_disabled(blob, i); - } - - /* GW51xx-E adds WDOG1_B external reset */ - if (rev < 'E') - ft_board_wdog_fixup(blob, WDOG1_ADDR); - break; - - case GW52xx: - /* GW522x Uses GPIO3_IO23 instead of GPIO1_IO29 */ - if (info->model[4] == '2') { - u32 handle = 0; - u32 *range = NULL; - - i = fdt_node_offset_by_compatible(blob, -1, - "fsl,imx6q-pcie"); - if (i) - range = (u32 *)fdt_getprop(blob, i, - "reset-gpio", NULL); - - if (range) { - i = fdt_node_offset_by_compat_reg(blob, - "fsl,imx6q-gpio", GPIO3_ADDR); - if (i) - handle = fdt_get_phandle(blob, i); - if (handle) { - range[0] = cpu_to_fdt32(handle); - range[1] = cpu_to_fdt32(23); - } - } - - /* these have broken usd_vsel */ - if (strstr((const char *)info->model, "SP318-B") || - strstr((const char *)info->model, "SP331-B")) - gpio_cfg[board_type].usd_vsel = 0; - - /* GW522x-B adds WDOG1_B external reset */ - if (rev < 'B') - ft_board_wdog_fixup(blob, WDOG1_ADDR); - } - - /* GW520x-E adds WDOG1_B external reset */ - else if (info->model[4] == '0' && rev < 'E') - ft_board_wdog_fixup(blob, WDOG1_ADDR); - break; - - case GW53xx: - /* GW53xx-E adds WDOG1_B external reset */ - if (rev < 'E') - ft_board_wdog_fixup(blob, WDOG1_ADDR); - - /* GW53xx-G has an adv7280 instead of an adv7180 */ - else if (rev > 'F') { - i = fdt_node_offset_by_compatible(blob, -1, "adi,adv7180"); - if (i) { - fdt_setprop_string(blob, i, "compatible", "adi,adv7280"); - fdt_setprop_empty(blob, i, "adv,force-bt656-4"); - } - } - break; - - case GW54xx: - /* - * disable serial2 node for GW54xx for compatibility with older - * 3.10.x kernel that improperly had this node enabled in the DT - */ - fdt_set_status_by_alias(blob, "serial2", FDT_STATUS_DISABLED); - - /* GW54xx-E adds WDOG2_B external reset */ - if (rev < 'E') - ft_board_wdog_fixup(blob, WDOG2_ADDR); - - /* GW54xx-G has an adv7280 instead of an adv7180 */ - else if (rev > 'F') { - i = fdt_node_offset_by_compatible(blob, -1, "adi,adv7180"); - if (i) { - fdt_setprop_string(blob, i, "compatible", "adi,adv7280"); - fdt_setprop_empty(blob, i, "adv,force-bt656-4"); - } - } - break; - - case GW551x: - /* GW551x-C adds WDOG1_B external reset */ - if (rev < 'C') - ft_board_wdog_fixup(blob, WDOG1_ADDR); - break; - case GW5901: - case GW5902: - /* GW5901/GW5901 revB adds WDOG1_B as an external reset */ - if (rev < 'B') - ft_board_wdog_fixup(blob, WDOG1_ADDR); - break; - } - - /* remove no-1-8-v if UHS-I support is present */ - if (gpio_cfg[board_type].usd_vsel) { - debug("Enabling UHS-I support\n"); - i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-usdhc", - USDHC3_ADDR); - if (i) - fdt_delprop(blob, i, "no-1-8-v"); - } -} - #ifdef CONFIG_FSL_ESDHC_IMX static struct fsl_esdhc_cfg usdhc_cfg[2]; diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h index a03663487f..7a60db7385 100644 --- a/board/gateworks/gw_ventana/common.h +++ b/board/gateworks/gw_ventana/common.h @@ -81,7 +81,5 @@ extern struct ventana gpio_cfg[GW_UNKNOWN]; /* configure gpio iomux/defaults */ void setup_iomux_gpio(int board, struct ventana_board_info *); -/* early model/revision ft fixups */ -void ft_early_fixup(void *fdt, int board_type); #endif /* #ifndef _GWVENTANA_COMMON_H_ */ diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 9b8f7b5177..8748878eb3 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1017,6 +1017,152 @@ void ft_board_pci_fixup(void *blob, struct bd_info *bd) } #endif /* if defined(CONFIG_CMD_PCI) */ +#define WDOG1_ADDR 0x20bc000 +#define WDOG2_ADDR 0x20c0000 +#define GPIO3_ADDR 0x20a4000 +#define USDHC3_ADDR 0x2198000 +static void ft_board_wdog_fixup(void *blob, phys_addr_t addr) +{ + int off = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", addr); + + if (off) { + fdt_delprop(blob, off, "ext-reset-output"); + fdt_delprop(blob, off, "fsl,ext-reset-output"); + } +} + +void ft_early_fixup(void *blob, int board_type) +{ + struct ventana_board_info *info = &ventana_info; + char rev = 0; + int i; + + /* determine board revision */ + for (i = sizeof(ventana_info.model) - 1; i > 0; i--) { + if (ventana_info.model[i] >= 'A') { + rev = ventana_info.model[i]; + break; + } + } + + /* + * Board model specific fixups + */ + switch (board_type) { + case GW51xx: + /* + * disable wdog node for GW51xx-A/B to work around + * errata causing wdog timer to be unreliable. + */ + if (rev >= 'A' && rev < 'C') { + i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", + WDOG1_ADDR); + if (i) + fdt_status_disabled(blob, i); + } + + /* GW51xx-E adds WDOG1_B external reset */ + if (rev < 'E') + ft_board_wdog_fixup(blob, WDOG1_ADDR); + break; + + case GW52xx: + /* GW522x Uses GPIO3_IO23 instead of GPIO1_IO29 */ + if (info->model[4] == '2') { + u32 handle = 0; + u32 *range = NULL; + + i = fdt_node_offset_by_compatible(blob, -1, + "fsl,imx6q-pcie"); + if (i) + range = (u32 *)fdt_getprop(blob, i, + "reset-gpio", NULL); + + if (range) { + i = fdt_node_offset_by_compat_reg(blob, + "fsl,imx6q-gpio", GPIO3_ADDR); + if (i) + handle = fdt_get_phandle(blob, i); + if (handle) { + range[0] = cpu_to_fdt32(handle); + range[1] = cpu_to_fdt32(23); + } + } + + /* these have broken usd_vsel */ + if (strstr((const char *)info->model, "SP318-B") || + strstr((const char *)info->model, "SP331-B")) + gpio_cfg[board_type].usd_vsel = 0; + + /* GW522x-B adds WDOG1_B external reset */ + if (rev < 'B') + ft_board_wdog_fixup(blob, WDOG1_ADDR); + } + + /* GW520x-E adds WDOG1_B external reset */ + else if (info->model[4] == '0' && rev < 'E') + ft_board_wdog_fixup(blob, WDOG1_ADDR); + break; + + case GW53xx: + /* GW53xx-E adds WDOG1_B external reset */ + if (rev < 'E') + ft_board_wdog_fixup(blob, WDOG1_ADDR); + + /* GW53xx-G has an adv7280 instead of an adv7180 */ + else if (rev > 'F') { + i = fdt_node_offset_by_compatible(blob, -1, "adi,adv7180"); + if (i) { + fdt_setprop_string(blob, i, "compatible", "adi,adv7280"); + fdt_setprop_empty(blob, i, "adv,force-bt656-4"); + } + } + break; + + case GW54xx: + /* + * disable serial2 node for GW54xx for compatibility with older + * 3.10.x kernel that improperly had this node enabled in the DT + */ + fdt_set_status_by_alias(blob, "serial2", FDT_STATUS_DISABLED); + + /* GW54xx-E adds WDOG2_B external reset */ + if (rev < 'E') + ft_board_wdog_fixup(blob, WDOG2_ADDR); + + /* GW54xx-G has an adv7280 instead of an adv7180 */ + else if (rev > 'F') { + i = fdt_node_offset_by_compatible(blob, -1, "adi,adv7180"); + if (i) { + fdt_setprop_string(blob, i, "compatible", "adi,adv7280"); + fdt_setprop_empty(blob, i, "adv,force-bt656-4"); + } + } + break; + + case GW551x: + /* GW551x-C adds WDOG1_B external reset */ + if (rev < 'C') + ft_board_wdog_fixup(blob, WDOG1_ADDR); + break; + case GW5901: + case GW5902: + /* GW5901/GW5901 revB adds WDOG1_B as an external reset */ + if (rev < 'B') + ft_board_wdog_fixup(blob, WDOG1_ADDR); + break; + } + + /* remove no-1-8-v if UHS-I support is present */ + if (gpio_cfg[board_type].usd_vsel) { + debug("Enabling UHS-I support\n"); + i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-usdhc", + USDHC3_ADDR); + if (i) + fdt_delprop(blob, i, "no-1-8-v"); + } +} + /* * called prior to booting kernel or by 'fdt boardsetup' command * diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index 2d6ef30b9b..3149e88315 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -1062,8 +1062,3 @@ int spl_start_uboot(void) return ret; } #endif - -void spl_perform_fixups(struct spl_image_info *spl_image) -{ - ft_early_fixup(spl_image->fdt_addr, board_type); -}