From: Pali Rohár Date: Tue, 10 Jan 2023 21:55:21 +0000 (+0100) Subject: arm: mvebu: Add support for generating NAND kwbimage X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=67bd6158d49ffe62e610e2a2706720275dfe10cb;p=u-boot.git arm: mvebu: Add support for generating NAND kwbimage Add a new Kconfig option CONFIG_MVEBU_SPL_BOOT_DEVICE_NAND which instruct make to generate kwbimage with NAND header. This image is used for booting from NAND flash (either SPI or parallel). Support is very simple, SPL after finishes DDR training returns back to the BootROM (via CONFIG_SPL_BOOTROM_SUPPORT option) and BootROM then loads and executes U-Boot proper. To generate correct kwbimage NAND header, it is required to set following Kconfig options: CONFIG_SYS_NAND_PAGE_SIZE CONFIG_SYS_NAND_BLOCK_SIZE CONFIG_MVEBU_SPL_NAND_BADBLK_LOCATION They are used only by make / mkimage when generating final kwbimage. CONFIG_MVEBU_SPL_NAND_BADBLK_LOCATION is a new mvebu specific Kconfig option which is set into kwbimage NAND_BADBLK_LOCATION header field. Signed-off-by: Pali Rohár --- diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index a574062918..cf249580d1 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -339,6 +339,11 @@ config MVEBU_SPL_BOOT_DEVICE_SPI imply SPL_SPI select SPL_BOOTROM_SUPPORT +config MVEBU_SPL_BOOT_DEVICE_NAND + bool "NAND flash (SPI or parallel)" + select MTD_RAW_NAND + select SPL_BOOTROM_SUPPORT + config MVEBU_SPL_BOOT_DEVICE_MMC bool "SDIO/MMC card" imply ENV_IS_IN_MMC @@ -364,6 +369,14 @@ config MVEBU_SPL_BOOT_DEVICE_UART endchoice +config MVEBU_SPL_NAND_BADBLK_LOCATION + hex "NAND Bad block indicator location" + depends on MVEBU_SPL_BOOT_DEVICE_NAND + range 0x0 0x1 + help + Value 0x0 = SLC flash = BBI at page 0 or page 1 + Value 0x1 = MLC flash = BBI at last page in the block + config MVEBU_EFUSE bool "Enable eFuse support" depends on HAVE_MVEBU_EFUSE diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index a9f506cf2f..c5c7ab73f6 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -50,6 +50,9 @@ KWB_REPLACE += BOOT_FROM ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI),) KWB_CFG_BOOT_FROM=spi endif +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_NAND),) + KWB_CFG_BOOT_FROM=nand +endif ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),) KWB_CFG_BOOT_FROM=sdio endif @@ -60,6 +63,13 @@ ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_UART),) KWB_CFG_BOOT_FROM=uart endif +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_NAND),) +KWB_REPLACE += NAND_PAGE_SIZE NAND_BLKSZ NAND_BADBLK_LOCATION +KWB_CFG_NAND_PAGE_SIZE = $(CONFIG_SYS_NAND_PAGE_SIZE) +KWB_CFG_NAND_BLKSZ = $(CONFIG_SYS_NAND_BLOCK_SIZE) +KWB_CFG_NAND_BADBLK_LOCATION = $(CONFIG_MVEBU_SPL_NAND_BADBLK_LOCATION) +endif + ifneq ($(CONFIG_SECURED_MODE_IMAGE),) KWB_REPLACE += CSK_INDEX KWB_CFG_CSK_INDEX = $(CONFIG_SECURED_MODE_CSK_INDEX) diff --git a/arch/arm/mach-mvebu/kwbimage.cfg.in b/arch/arm/mach-mvebu/kwbimage.cfg.in index ccb0997581..90cf00c5b9 100644 --- a/arch/arm/mach-mvebu/kwbimage.cfg.in +++ b/arch/arm/mach-mvebu/kwbimage.cfg.in @@ -11,6 +11,11 @@ VERSION 1 # Boot Media configurations #@BOOT_FROM +# NAND configuration +#@NAND_PAGE_SIZE +#@NAND_BLKSZ +#@NAND_BADBLK_LOCATION + # Enable BootROM output via DEBUG flag on SoCs which require it #@DEBUG diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 5b35da45f5..5c7b0d9dcc 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -628,7 +628,8 @@ comment "Generic NAND options" config SYS_NAND_BLOCK_SIZE hex "NAND chip eraseblock size" - depends on ARCH_SUNXI || SPL_NAND_SUPPORT || TPL_NAND_SUPPORT + depends on ARCH_SUNXI || SPL_NAND_SUPPORT || TPL_NAND_SUPPORT || \ + MVEBU_SPL_BOOT_DEVICE_NAND depends on !NAND_MXS && !NAND_DENALI_DT && !NAND_LPC32XX_MLC && \ !NAND_FSL_IFC && !NAND_MT7621 help @@ -655,6 +656,7 @@ config SYS_NAND_PAGE_SIZE hex "NAND chip page size" depends on ARCH_SUNXI || NAND_OMAP_GPMC || NAND_LPC32XX_SLC || \ SPL_NAND_SIMPLE || (NAND_MXC && SPL_NAND_SUPPORT) || \ + MVEBU_SPL_BOOT_DEVICE_NAND || \ (NAND_ATMEL && SPL_NAND_SUPPORT) || SPL_GENERATE_ATMEL_PMECC_HEADER depends on !NAND_MXS && !NAND_DENALI_DT && !NAND_LPC32XX_MLC && !NAND_MT7621 help