From: Ramon Fried Date: Wed, 16 May 2018 09:13:39 +0000 (+0300) Subject: mach-snapdragon: Fix UART clock flow X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=640dc349422d1f228ef8d2bb35cd89b1663273f1;p=u-boot.git mach-snapdragon: Fix UART clock flow UART clock enabling flow was wrong. Changed the flow according to downstream implementation in LK. Signed-off-by: Ramon Fried --- diff --git a/arch/arm/mach-snapdragon/clock-apq8016.c b/arch/arm/mach-snapdragon/clock-apq8016.c index 9c0cc1c22c..6e4a0ccb90 100644 --- a/arch/arm/mach-snapdragon/clock-apq8016.c +++ b/arch/arm/mach-snapdragon/clock-apq8016.c @@ -17,7 +17,6 @@ /* GPLL0 clock control registers */ #define GPLL0_STATUS_ACTIVE BIT(17) -#define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0) static const struct bcr_regs sdc_regs[] = { { @@ -36,11 +35,17 @@ static const struct bcr_regs sdc_regs[] = { } }; -static struct gpll0_ctrl gpll0_ctrl = { +static struct pll_vote_clk gpll0_vote_clk = { .status = GPLL0_STATUS, .status_bit = GPLL0_STATUS_ACTIVE, .ena_vote = APCS_GPLL_ENA_VOTE, - .vote_bit = APCS_GPLL_ENA_VOTE_GPLL0, + .vote_bit = BIT(0), +}; + +static struct vote_clk gcc_blsp1_ahb_clk = { + .cbcr_reg = BLSP1_AHB_CBCR, + .ena_vote = APCS_CLOCK_BRANCH_ENA_VOTE, + .vote_bit = BIT(10), }; /* SDHCI */ @@ -55,7 +60,7 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) /* 800Mhz/div, gpll0 */ clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0, CFG_CLK_SRC_GPLL0); - clk_enable_gpll0(priv->base, &gpll0_ctrl); + clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot)); return rate; @@ -72,12 +77,16 @@ static const struct bcr_regs uart2_regs = { /* UART: 115200 */ static int clk_init_uart(struct msm_clk_priv *priv) { - /* Enable iface clk */ - clk_enable_cbc(priv->base + BLSP1_AHB_CBCR); + /* Enable AHB clock */ + clk_enable_vote_clk(priv->base, &gcc_blsp1_ahb_clk); + /* 7372800 uart block clock @ GPLL0 */ clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625, CFG_CLK_SRC_GPLL0); - clk_enable_gpll0(priv->base, &gpll0_ctrl); + + /* Vote for gpll0 clock */ + clk_enable_gpll0(priv->base, &gpll0_vote_clk); + /* Enable core clk */ clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR); diff --git a/arch/arm/mach-snapdragon/clock-apq8096.c b/arch/arm/mach-snapdragon/clock-apq8096.c index 008649a4c6..628c38785b 100644 --- a/arch/arm/mach-snapdragon/clock-apq8096.c +++ b/arch/arm/mach-snapdragon/clock-apq8096.c @@ -27,7 +27,7 @@ static const struct bcr_regs sdc_regs = { .D = SDCC2_D, }; -static const struct gpll0_ctrl gpll0_ctrl = { +static const struct pll_vote_clk gpll0_vote_clk = { .status = GPLL0_STATUS, .status_bit = GPLL0_STATUS_ACTIVE, .ena_vote = APCS_GPLL_ENA_VOTE, @@ -41,7 +41,7 @@ static int clk_init_sdc(struct msm_clk_priv *priv, uint rate) clk_enable_cbc(priv->base + SDCC2_AHB_CBCR); clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0, CFG_CLK_SRC_GPLL0); - clk_enable_gpll0(priv->base, &gpll0_ctrl); + clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC2_APPS_CBCR); return rate; diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.c b/arch/arm/mach-snapdragon/clock-snapdragon.c index f738f57043..85526186c6 100644 --- a/arch/arm/mach-snapdragon/clock-snapdragon.c +++ b/arch/arm/mach-snapdragon/clock-snapdragon.c @@ -30,7 +30,7 @@ void clk_enable_cbc(phys_addr_t cbcr) ; } -void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *gpll0) +void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0) { if (readl(base + gpll0->status) & gpll0->status_bit) return; /* clock already enabled */ @@ -41,6 +41,21 @@ void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *gpll0) ; } +#define BRANCH_ON_VAL (0) +#define BRANCH_NOC_FSM_ON_VAL BIT(29) +#define BRANCH_CHECK_MASK GENMASK(31, 28) + +void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk) +{ + u32 val; + + setbits_le32(base + vclk->ena_vote, vclk->vote_bit); + do { + val = readl(base + vclk->cbcr_reg); + val &= BRANCH_CHECK_MASK; + } while ((val != BRANCH_ON_VAL) && (val != BRANCH_NOC_FSM_ON_VAL)); +} + #define APPS_CMD_RGCR_UPDATE BIT(0) /* Update clock command via CMD_RGCR */ diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.h b/arch/arm/mach-snapdragon/clock-snapdragon.h index 2cff4f8a06..58fab40a2e 100644 --- a/arch/arm/mach-snapdragon/clock-snapdragon.h +++ b/arch/arm/mach-snapdragon/clock-snapdragon.h @@ -11,13 +11,18 @@ #define CFG_CLK_SRC_GPLL0 (1 << 8) #define CFG_CLK_SRC_MASK (7 << 8) -struct gpll0_ctrl { +struct pll_vote_clk { uintptr_t status; int status_bit; uintptr_t ena_vote; int vote_bit; }; +struct vote_clk { + uintptr_t cbcr_reg; + uintptr_t ena_vote; + int vote_bit; +}; struct bcr_regs { uintptr_t cfg_rcgr; uintptr_t cmd_rcgr; @@ -30,9 +35,10 @@ struct msm_clk_priv { phys_addr_t base; }; -void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *pll0); +void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0); void clk_bcr_update(phys_addr_t apps_cmd_rgcr); void clk_enable_cbc(phys_addr_t cbcr); +void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk); void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, int div, int m, int n, int source); diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h index ae784387fa..520e2e6bd7 100644 --- a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h +++ b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h @@ -13,6 +13,7 @@ /* Clocks: (from CLK_CTL_BASE) */ #define GPLL0_STATUS (0x2101C) #define APCS_GPLL_ENA_VOTE (0x45000) +#define APCS_CLOCK_BRANCH_ENA_VOTE (0x45004) #define SDCC_BCR(n) ((n * 0x1000) + 0x41000) #define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004)