From: Andreas Bießmann Date: Tue, 2 Apr 2013 06:05:58 +0000 (+0000) Subject: tricorder: enable hw assisted BCH8 in SPL and u-boot X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=616cf60ee0886eaf7d60b9204f762391a1e9ae52;p=u-boot.git tricorder: enable hw assisted BCH8 in SPL and u-boot Signed-off-by: Andreas Bießmann Cc: Tom Rini Cc: Thomas Weber Cc: Ilya Yanok Cc: Scott Wood --- diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index ebd7a257f3..4c75cc52f3 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -125,6 +125,8 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ +#define CONFIG_NAND_OMAP_BCH8 +#define CONFIG_BCH /* commands to include */ #include @@ -290,7 +292,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (55 * 1024) /* 7 KB for stack */ #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ @@ -303,11 +305,14 @@ #define CONFIG_SYS_NAND_OOBSIZE 64 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13} +#define CONFIG_SYS_NAND_ECCPOS {12, 13, 14, 15, 16, 17, 18, 19, 20,\ + 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\ + 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46,\ + 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,\ + 60, 61, 62, 63} #define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_ECCBYTES 13 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE