From: Suman Anna Date: Tue, 18 Aug 2020 19:09:43 +0000 (-0500) Subject: env: ti: j721e-evm: Update R5 SPL rproc env variables for J7200 X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=615d10f736e850c073a17b2f64fd08c7f5b32fe2;p=u-boot.git env: ti: j721e-evm: Update R5 SPL rproc env variables for J7200 The R5 SPL on J7200 SoCs will be limited to booting just the MCU R5FSS0 R5F core in LockStep-mode at present, so add the two required environment variables 'addr_mcur5f0_0load' and 'name_mcur5f0_0fw' that are needed by the R5 SPL early-boot logic. The firmware name used is also different from that on J721E SoCs. Signed-off-by: Suman Anna --- diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index 9988c43641..1b47e18b2f 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -84,11 +84,17 @@ "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" #ifdef CONFIG_SYS_K3_SPL_ATF +#if defined(CONFIG_TARGET_J721E_R5_EVM) #define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \ "addr_mainr5f0_0load=0x88000000\0" \ "name_mainr5f0_0fw=/lib/firmware/j7-main-r5f0_0-fw\0" \ "addr_mcur5f0_0load=0x89000000\0" \ "name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0" +#elif defined(CONFIG_TARGET_J7200_R5_EVM) +#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \ + "addr_mcur5f0_0load=0x89000000\0" \ + "name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0" +#endif /* CONFIG_TARGET_J721E_R5_EVM */ #else #define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC "" #endif /* CONFIG_SYS_K3_SPL_ATF */