From: Andrew F. Davis Date: Wed, 14 Feb 2018 17:53:37 +0000 (-0600) Subject: ARM: Kconfig: Move TI_SECURE_DEVICE to a common area X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=5fbed8f2c63bde8a482ccba6bce6477346301cb4;p=u-boot.git ARM: Kconfig: Move TI_SECURE_DEVICE to a common area TI_SECURE_DEVICE is used by both OMAP2+ and Keystone2 family devices, and so when ARCH_OMAP2PLUS was used to gate off the OMAP2+ Kconfig Keystone2 family devices lost this config option. Move this option out of mach-omap2 Kconfig to a spot accessible by both families. We picked arch/arm/Kconfig over the TI specific board/ti/ location as this option is not specific to our boards but rather our architecture. Plus at some point this option can be changed to just SECURE_DEVICE, as having secure parts is not exclusive to TI and so other vendors can interpret this option as needed by their device configurations. Fixes: a93fbf4a7892 ("ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig") Signed-off-by: Andrew F. Davis Reviewed-by: Lokesh Vutla --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 77cb20090c..2c52ff025a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1190,6 +1190,16 @@ config ARCH_ASPEED endchoice +config TI_SECURE_DEVICE + bool "HS Device Type Support" + depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS + help + If a high secure (HS) device type is being used, this config + must be set. This option impacts various aspects of the + build system (to create signed boot images that can be + authenticated) and the code. See the doc/README.ti-secure + file for further details. + source "arch/arm/mach-aspeed/Kconfig" source "arch/arm/mach-at91/Kconfig" diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index abd1aa7fe1..62c25c4044 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -133,16 +133,6 @@ config SYS_MPUCLK help Defines the MPU clock speed (in MHz). -config TI_SECURE_DEVICE - bool "HS Device Type Support" - depends on OMAP54XX || AM43XX || AM33XX || ARCH_KEYSTONE - help - If a high secure (HS) device type is being used, this config - must be set. This option impacts various aspects of the - build system (to create signed boot images that can be - authenticated) and the code. See the doc/README.ti-secure - file for further details. - config TI_SECURE_EMIF_REGION_START hex "Reserved EMIF region start address" depends on TI_SECURE_DEVICE