From: Rabeeh Khoury Date: Thu, 25 Oct 2018 17:37:47 +0000 (+0300) Subject: ARM: mvebu: dts: add Clearfog GT-8K X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=5bbf36af7ff6f4ff77d903320e95e5628c68884d;p=u-boot.git ARM: mvebu: dts: add Clearfog GT-8K The SolidRun Clearfog GT-8K is based on Armada 8040. https://wiki.solid-run.com/doku.php?id=products:a8040:clearfoggt8k The config file is identical to the Macchiatobin one (mvebu_mcbin-88f8040_defconfig) with only the default device-tree changed. Signed-off-by: Rabeeh Khoury Signed-off-by: Baruch Siach Signed-off-by: Stefan Roese --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7ed222db86..84b7e5335c 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-7040-db-nand.dtb \ armada-8040-db.dtb \ armada-8040-mcbin.dtb \ + armada-8040-clearfog-gt-8k.dtb \ armada-xp-gp.dtb \ armada-xp-maxbcm.dtb \ armada-xp-synology-ds414.dtb \ diff --git a/arch/arm/dts/armada-8040-clearfog-gt-8k.dts b/arch/arm/dts/armada-8040-clearfog-gt-8k.dts new file mode 100644 index 0000000000..498105f25f --- /dev/null +++ b/arch/arm/dts/armada-8040-clearfog-gt-8k.dts @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 SolidRun ltd + */ + +#include "armada-8040.dtsi" + +/ { + model = "ClearFog-GT-8K"; + compatible = "solidrun,clearfog-gt-8k", + "marvell,armada8040"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + i2c0 = &cpm_i2c0; + i2c1 = &cpm_i2c1; + spi0 = &cps_spi1; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + simple-bus { + compatible = "simple-bus"; + + reg_usb3h0_vbus: usb3-vbus0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&cpm_xhci_vbus_pins>; + regulator-name = "reg-usb3h0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <300000>; + shutdown-delay-us = <500000>; + regulator-force-boot-off; + gpio = <&cpm_gpio1 15 GPIO_ACTIVE_LOW>; /* GPIO[47] */ + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&ap_pinctl { + /* + * MPP Bus: + * eMMC [0-10] + * UART0 [11,19] + */ + /* 0 1 2 3 4 5 6 7 8 9 */ + pin-func = < 1 1 1 1 1 1 1 1 1 1 + 1 3 0 0 0 0 0 0 0 3 >; +}; + +/* on-board eMMC */ +&ap_sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&ap_emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpm_pinctl { + /* + * MPP Bus: + * [0-31] = 0xff: Keep default CP0_shared_pins: + * [11] CLKOUT_MPP_11 (out) + * [23] LINK_RD_IN_CP2CP (in) + * [25] CLKOUT_MPP_25 (out) + * [29] AVS_FB_IN_CP2CP (in) + * [32, 33, 34] pci0/1/2 reset + * [35-38] CP0 I2C1 and I2C0 + * [39] GPIO reset button + * [40,41] LED0 and LED1 + * [43] 1512 phy reset + * [47] USB VBUS EN (active low) + * [48] FAN PWM + * [49] SFP+ present signal + * [50] TPM interrupt + * [51] WLAN0 disable + * [52] WLAN1 disable + * [53] LTE disable + * [54] NFC reset + * [55] Micro SD card detect + * [56-61] Micro SD + */ + /* 0 1 2 3 4 5 6 7 8 9 */ + pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff + 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff + 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff + 0xff 0 0 0 0 2 2 2 2 0 + 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0xe 0xe 0xe 0xe + 0xe 0xe 0 >; + + cpm_xhci_vbus_pins: cpm-xhci-vbus-pins { + marvell,pins = < 47 >; + marvell,function = <0>; + }; + + cps_1g_phy_reset: cps-1g-phy-reset { + marvell,pins = < 43 >; + marvell,function = <0>; + }; +}; + +/* uSD slot */ +&cpm_sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&cpm_sdhci_pins>; + bus-width = <4>; + status = "okay"; +}; + +&cpm_pcie0 { + num-lanes = <1>; + status = "okay"; +}; + +&cpm_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&cpm_i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&cpm_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&cpm_i2c1_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&cpm_sata0 { + status = "okay"; +}; + +&cpm_comphy { + /* + * CP0 Serdes Configuration: + * Lane 0: PCIe0 (x1) + * Lane 1: Not connected + * Lane 2: SFI (10G) + * Lane 3: Not connected + * Lane 4: USB 3.0 host port1 (can be PCIe) + * Lane 5: Not connected + */ + phy0 { + phy-type = ; + }; + phy1 { + phy-type = ; + }; + phy2 { + phy-type = ; + }; + phy3 { + phy-type = ; + }; + phy4 { + phy-type = ; + }; + phy5 { + phy-type = ; + }; +}; + +&cpm_ethernet { + pinctrl-names = "default"; + status = "okay"; +}; + +/* 10G SFI SFP */ +&cpm_eth0 { + status = "okay"; + phy-mode = "sfi"; +}; + +&cps_sata0 { + status = "okay"; +}; + +&cps_usb3_0 { + vbus-supply = <®_usb3h0_vbus>; + status = "okay"; +}; + +&cps_utmi0 { + status = "okay"; +}; + +&cps_pinctl { + /* + * MPP Bus: + * [0-5] TDM + * [6] VHV Enable + * [7] CP1 SPI0 CSn1 (FXS) + * [8] CP1 SPI0 CSn0 (TPM) + * [9.11]CP1 SPI0 MOSI/MISO/CLK + * [13] CP1 SPI1 MISO (TDM and SPI ROM shared) + * [14] CP1 SPI1 CS0n (64Mb SPI ROM) + * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared) + * [16] CP1 SPI1 CLK (TDM and SPI ROM shared) + * [24] Topaz switch reset + * [26] Buzzer + * [27] CP1 SMI MDIO + * [28] CP1 SMI MDC + * [29] CP0 10G SFP TX Disable + * [30] WPS button + * [31] Front panel button + * [32-62] = 0xff: Keep default CP1_shared_pins: + */ + /* 0 1 2 3 4 5 6 7 8 9 */ + pin-func = < 0x4 0x4 0x4 0x4 0x4 0x4 0x0 0x4 0x4 0x4 + 0x4 0x4 0x0 0x3 0x3 0x3 0x3 0xff 0xff 0xff + 0xff 0xff 0xff 0xff 0x0 0xff 0x0 0x8 0x8 0x0 + 0x0 0x0 0x0 0xff 0xff 0xff 0xff 0xff 0xff 0xff + 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff + 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff + 0xff 0xff 0xff>; +}; + +&cps_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cps_spi1_pins>; + status = "okay"; + + spi-flash@0 { + compatible = "jedec,spi-nor", "spi-flash"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Filesystem"; + reg = <0x200000 0xce0000>; + }; + }; + }; +}; + +&cps_comphy { + /* + * CP1 Serdes Configuration: + * Lane 0: SATA 1 (RX swapped). Can be PCIe0 + * Lane 1: Not used + * Lane 2: USB HOST 0 + * Lane 3: SGMII1 - Connected to 1512 port + * Lane 4: Not used + * Lane 5: SGMII2 - Connected to Topaz switch + */ + phy0 { + phy-type = ; + phy-invert = ; + }; + phy1 { + phy-type = ; + }; + phy2 { + phy-type = ; + }; + phy3 { + phy-type = ; + phy-speed = ; + }; + phy4 { + phy-type = ; + }; + phy5 { + phy-type = ; + phy-speed = ; + }; +}; + +&cps_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cps_ethernet { + pinctrl-names = "default"; + pinctrl-0 = <&cps_1g_phy_reset>; + status = "okay"; +}; + +/* 1G SGMII */ +&cps_eth1 { + status = "okay"; + phy-mode = "sgmii"; + phy = <&phy0>; + phy-reset-gpios = <&cpm_gpio1 11 GPIO_ACTIVE_LOW>; +}; + +/* 2.5G to Topaz switch */ +&cps_eth2 { + status = "okay"; + phy-mode = "sgmii"; + phy-speed = <2500>; + phy-reset-gpios = <&cps_gpio0 24 GPIO_ACTIVE_LOW>; +}; diff --git a/configs/clearfog_gt_8k_defconfig b/configs/clearfog_gt_8k_defconfig new file mode 100644 index 0000000000..6cd1f89b23 --- /dev/null +++ b/configs/clearfog_gt_8k_defconfig @@ -0,0 +1,75 @@ +CONFIG_ARM=y +CONFIG_ARCH_MVEBU=y +CONFIG_SYS_TEXT_BASE=0x00000000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_MVEBU_ARMADA_8K=y +CONFIG_DEBUG_UART_BASE=0xf0512000 +CONFIG_DEBUG_UART_CLOCK=200000000 +CONFIG_DEFAULT_DEVICE_TREE="armada-8040-clearfog-gt-8k" +CONFIG_SMBIOS_PRODUCT_NAME="" +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_NR_DRAM_BANKS=1 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_ARCH_EARLY_INIT_R=y +CONFIG_BOARD_EARLY_INIT_F=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_MVEBU_BUBT=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_MAC_PARTITION=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_AHCI_MVEBU=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_XENON=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHYLIB=y +CONFIG_PHY_GIGE=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCIE_DW_MVEBU=y +CONFIG_MVEBU_COMPHY_SUPPORT=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_ARMADA_8K=y +CONFIG_DM_REGULATOR_FIXED=y +# CONFIG_SPL_SERIAL_PRESENT is not set +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_SYS_NS16550=y +CONFIG_KIRKWOOD_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_SMBIOS_MANUFACTURER=""