From: Venkatesh Yadav Abbarapu Date: Fri, 20 Sep 2024 04:16:49 +0000 (+0530) Subject: ufs: add support for DesignWare Controller X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=4b0ea24b42012b7c046ef253cc3eeee248da5358;p=u-boot.git ufs: add support for DesignWare Controller This patch has the goal to add support for DesignWare UFS Controller specific operations. This is based on linux kernel commit: "drivers/scsi/ufs/ufshcd-dwc.c: ufs: add support for DesignWare Controller" (sha1: 4b9ffb5a353bdee49f1f477ffe2b95ab3f9cbc0c) It is ported from linux kernel 6.11-rc1. Signed-off-by: Venkatesh Yadav Abbarapu Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240920041651.18173-2-venkatesh.abbarapu@amd.com Signed-off-by: Neil Armstrong --- diff --git a/drivers/ufs/ufshcd-dwc.c b/drivers/ufs/ufshcd-dwc.c new file mode 100644 index 0000000000..3f62e59a06 --- /dev/null +++ b/drivers/ufs/ufshcd-dwc.c @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS Host driver for Synopsys Designware Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ufs.h" +#include "ufshci-dwc.h" +#include "ufshcd-dwc.h" + +int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba, + const struct ufshcd_dme_attr_val *v, int n) +{ + int ret = 0; + int attr_node = 0; + + for (attr_node = 0; attr_node < n; attr_node++) { + ret = ufshcd_dme_set_attr(hba, v[attr_node].attr_sel, + ATTR_SET_NOR, v[attr_node].mib_val, v[attr_node].peer); + if (ret) + return ret; + } + + return 0; +} + +/** + * ufshcd_dwc_program_clk_div() - program clock divider. + * @hba: Private Structure pointer + * @divider_val: clock divider value to be programmed + * + */ +static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val) +{ + ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV); +} + +/** + * ufshcd_dwc_link_is_up() - check if link is up. + * @hba: private structure pointer + * + * Return: 0 on success, non-zero value on failure. + */ +static int ufshcd_dwc_link_is_up(struct ufs_hba *hba) +{ + int dme_result = 0; + + ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result); + + if (dme_result == UFSHCD_LINK_IS_UP) + return 0; + + return 1; +} + +/** + * ufshcd_dwc_connection_setup() - configure unipro attributes. + * @hba: pointer to drivers private data + * + * This function configures both the local side (host) and the peer side + * (device) unipro attributes to establish the connection to application/ + * cport. + * This function is not required if the hardware is properly configured to + * have this connection setup on reset. But invoking this function does no + * harm and should be fine even working with any ufs device. + * + * Return: 0 on success non-zero value on failure. + */ +static int ufshcd_dwc_connection_setup(struct ufs_hba *hba) +{ + static const struct ufshcd_dme_attr_val setup_attrs[] = { + { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_LOCAL }, + { UIC_ARG_MIB(N_DEVICEID), 0, DME_LOCAL }, + { UIC_ARG_MIB(N_DEVICEID_VALID), 0, DME_LOCAL }, + { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_LOCAL }, + { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_LOCAL }, + { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_LOCAL }, + { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_LOCAL }, + { UIC_ARG_MIB(T_CPORTMODE), 1, DME_LOCAL }, + { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_LOCAL }, + { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_PEER }, + { UIC_ARG_MIB(N_DEVICEID), 1, DME_PEER }, + { UIC_ARG_MIB(N_DEVICEID_VALID), 1, DME_PEER }, + { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_PEER }, + { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_PEER }, + { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_PEER }, + { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_PEER }, + { UIC_ARG_MIB(T_CPORTMODE), 1, DME_PEER }, + { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_PEER } + }; + return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs)); +} + +/** + * ufshcd_dwc_link_startup_notify() - program clock divider. + * @hba: private structure pointer + * @status: Callback notify status + * + * Return: 0 on success, non-zero value on failure. + */ +int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status) +{ + int err = 0; + + if (status == PRE_CHANGE) { + ufshcd_dwc_program_clk_div(hba, DWC_UFS_REG_HCLKDIV_DIV_125); + } else { /* POST_CHANGE */ + err = ufshcd_dwc_link_is_up(hba); + if (err) { + dev_err(hba->dev, "Link is not up\n"); + return err; + } + + err = ufshcd_dwc_connection_setup(hba); + if (err) + dev_err(hba->dev, "Connection setup failed (%d)\n", + err); + } + + return err; +} diff --git a/drivers/ufs/ufshcd-dwc.h b/drivers/ufs/ufshcd-dwc.h new file mode 100644 index 0000000000..d997045d3c --- /dev/null +++ b/drivers/ufs/ufshcd-dwc.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * UFS Host driver for Synopsys Designware Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto + */ + +#ifndef _UFSHCD_DWC_H +#define _UFSHCD_DWC_H + +struct ufshcd_dme_attr_val { + u32 attr_sel; + u32 mib_val; + u8 peer; +}; + +int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status); +int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba, + const struct ufshcd_dme_attr_val *v, int n); +#endif /* End of Header */ diff --git a/drivers/ufs/ufshci-dwc.h b/drivers/ufs/ufshci-dwc.h new file mode 100644 index 0000000000..9e24c230c6 --- /dev/null +++ b/drivers/ufs/ufshci-dwc.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * UFS Host driver for Synopsys Designware Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto + */ + +#ifndef _UFSHCI_DWC_H +#define _UFSHCI_DWC_H + +/* DWC HC UFSHCI specific Registers */ +enum dwc_specific_registers { + DWC_UFS_REG_HCLKDIV = 0xFC, +}; + +/* Clock Divider Values: Hex equivalent of frequency in MHz */ +enum clk_div_values { + DWC_UFS_REG_HCLKDIV_DIV_62_5 = 0x3e, + DWC_UFS_REG_HCLKDIV_DIV_125 = 0x7d, + DWC_UFS_REG_HCLKDIV_DIV_200 = 0xc8, +}; + +/* Selector Index */ +enum selector_index { + SELIND_LN0_TX = 0x00, + SELIND_LN1_TX = 0x01, + SELIND_LN0_RX = 0x04, + SELIND_LN1_RX = 0x05, +}; +#endif