From: Fabio Estevam Date: Wed, 23 Aug 2023 17:59:08 +0000 (-0300) Subject: thermal: imx_tmu: Fix the polling default X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=402b8106eca604d3e1c150fbde88064d5044cb7c;p=u-boot.git thermal: imx_tmu: Fix the polling default When the 'polling-delay' property is not passed via devicetree, pdata->polling_delay keeps at 0. This causes the imx_tmu driver to get stuck inside the busy while() loop when the CPU temperature is above the alert point. Fix this problem by passing a one second polling interval, which provides a proper delay to let the system to cool down and exit the while() loop when the temperature is below the alert point. Signed-off-by: Fabio Estevam --- diff --git a/drivers/thermal/imx_tmu.c b/drivers/thermal/imx_tmu.c index 97efc55044..d9a04eaf79 100644 --- a/drivers/thermal/imx_tmu.c +++ b/drivers/thermal/imx_tmu.c @@ -37,6 +37,7 @@ DECLARE_GLOBAL_DATA_PTR; #define TER_ADC_PD 0x40000000 #define TER_ALPF 0x3 +#define IMX_TMU_POLLING_DELAY_MS 1000 /* * i.MX TMU Registers */ @@ -574,6 +575,8 @@ static int imx_tmu_parse_fdt(struct udevice *dev) dev_dbg(dev, "%s\n", __func__); + pdata->polling_delay = IMX_TMU_POLLING_DELAY_MS; + if (pdata->zone_node) { pdata->regs = (union tmu_regs *)dev_read_addr_ptr(dev); @@ -602,7 +605,8 @@ static int imx_tmu_parse_fdt(struct udevice *dev) dev_dbg(dev, "args.args_count %d, id %d\n", args.args_count, pdata->id); - pdata->polling_delay = dev_read_u32_default(dev, "polling-delay", 1000); + pdata->polling_delay = dev_read_u32_default(dev, "polling-delay", + IMX_TMU_POLLING_DELAY_MS); trips_np = ofnode_path("/thermal-zones/cpu-thermal/trips"); ofnode_for_each_subnode(trips_np, trips_np) {