From: Jonas Karlman Date: Thu, 18 Jan 2024 07:19:46 +0000 (+0000) Subject: rockchip: rk3328-rock-pi-e: Enable DM_ETH_PHY and PHY_REALTEK X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=33380a5a916092fcf76f43e06539159d1015d8b1;p=u-boot.git rockchip: rk3328-rock-pi-e: Enable DM_ETH_PHY and PHY_REALTEK Enable the DM_ETH_PHY and PHY_REALTEK now that the designware ethernet driver call eth_phy_set_mdio_bus() to assist with resetting the eth PHY during probe. Fixes ethernet on the v1.21 hw revision of Radxa ROCK Pi E: => mdio list ethernet@ff540000: 1 - RealTek RTL8211F <--> ethernet@ff540000 => net list eth0 : ethernet@ff540000 86:e0:c0:ea:fa:a9 active eth1 : ethernet@ff550000 86:e0:c0:ea:fa:a8 => dhcp Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.1.114 (1004 ms) Reported-by: Trevor Woerner Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- diff --git a/configs/rock-pi-e-rk3328_defconfig b/configs/rock-pi-e-rk3328_defconfig index c0375beffe..6dda900a9b 100644 --- a/configs/rock-pi-e-rk3328_defconfig +++ b/configs/rock-pi-e-rk3328_defconfig @@ -76,6 +76,8 @@ CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH_PHY=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y