From: Simon Glass Date: Wed, 8 Apr 2020 22:57:24 +0000 (-0600) Subject: tpm: cr50: Use the correct GPIO binding X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=32e8ee004a3dad1a9cc06bd3ac44d8ba562afc3e;p=u-boot.git tpm: cr50: Use the correct GPIO binding This device should use ready-gpios rather than ready-gpio. Fix it. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- diff --git a/arch/x86/dts/chromebook_coral.dts b/arch/x86/dts/chromebook_coral.dts index af52e11c89..d48ef3573e 100644 --- a/arch/x86/dts/chromebook_coral.dts +++ b/arch/x86/dts/chromebook_coral.dts @@ -292,7 +292,7 @@ reg = <0x50>; compatible = "google,cr50"; u-boot,i2c-offset-len = <0>; - ready-gpio = <&gpio_n 28 GPIO_ACTIVE_LOW>; + ready-gpios = <&gpio_n 28 GPIO_ACTIVE_LOW>; interrupts-extended = <&acpi_gpe 0x3c 0>; }; }; diff --git a/doc/device-tree-bindings/gpio/intel,apl-gpio.txt b/doc/device-tree-bindings/gpio/intel,apl-gpio.txt index cf0659b70e..8422ff63ab 100644 --- a/doc/device-tree-bindings/gpio/intel,apl-gpio.txt +++ b/doc/device-tree-bindings/gpio/intel,apl-gpio.txt @@ -47,7 +47,7 @@ Example: reg = <0x50>; compatible = "google,cr50"; u-boot,i2c-offset-len = <0>; - ready-gpio = <&gpio_n GPIO_28 GPIO_ACTIVE_LOW>; + ready-gpios = <&gpio_n GPIO_28 GPIO_ACTIVE_LOW>; }; }; diff --git a/doc/device-tree-bindings/interrupt-controller/intel,acpi-gpe.txt b/doc/device-tree-bindings/interrupt-controller/intel,acpi-gpe.txt index d9252bf29f..2fe02d8a22 100644 --- a/doc/device-tree-bindings/interrupt-controller/intel,acpi-gpe.txt +++ b/doc/device-tree-bindings/interrupt-controller/intel,acpi-gpe.txt @@ -25,6 +25,6 @@ Example: tpm@50 { reg = <0x50>; compatible = "google,cr50"; - ready-gpio = <&gpio_n 0x1c GPIO_ACTIVE_LOW>; + ready-gpios = <&gpio_n 0x1c GPIO_ACTIVE_LOW>; interrupts-extended = <&acpi_gpe 0x3c 0>; }; diff --git a/drivers/tpm/cr50_i2c.c b/drivers/tpm/cr50_i2c.c index c1d2d2fa38..b67051af26 100644 --- a/drivers/tpm/cr50_i2c.c +++ b/drivers/tpm/cr50_i2c.c @@ -607,7 +607,7 @@ static int cr50_i2c_ofdata_to_platdata(struct udevice *dev) priv->irq = irq; priv->use_irq = true; } else { - ret = gpio_request_by_name(dev, "ready-gpio", 0, + ret = gpio_request_by_name(dev, "ready-gpios", 0, &priv->ready_gpio, GPIOD_IS_IN); if (ret) { log_warning("Cr50 does not have an ready GPIO/interrupt (err=%d)\n",