From: Marek Vasut Date: Sun, 17 Sep 2023 11:49:30 +0000 (+0200) Subject: ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs on Salvator... X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=2d22cb34136cf6558e034a46a0bffd846a6fe596;p=u-boot.git ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs on Salvator-X boards Add compatible values to Ethernet PHY subnodes representing Micrel KSZ9031 PHYs on R-Car Gen3 Salvator-X boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. This is a fix for missed addition of these properties on Salvator-X boards. Ported from Linux kernel commit 722d55f3a9bd810f3a1a31916cc74e2915a994ce . Signed-off-by: Marek Vasut --- diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi index 98bbcafc8c..23fdd1115b 100644 --- a/arch/arm/dts/salvator-common.dtsi +++ b/arch/arm/dts/salvator-common.dtsi @@ -328,6 +328,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>;