From: Michal Simek Date: Tue, 24 Aug 2021 12:56:47 +0000 (+0200) Subject: xilinx: zynqmp: Enable stack relocation to DDR X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=229cb5c6ba3469cbc4a0bcc69389fe61c51fd3b4;p=u-boot.git xilinx: zynqmp: Enable stack relocation to DDR There is no space in OCM for SPL stack because the space in OCM is occupied by TF-A. That's why move relocate stack to DDR to 0x18000000 address and also enable SPL_SIZE_LIMIT not to be more then 0xfffea000 which is default address for TFA. It is good to summarize current DDR usage in SPL flow. 0-0x80000 is used for BSS (CONFIG_SPL_BSS_START_ADDR, CONFIG_SPL_BSS_MAX_SIZE) 0x100000 is used for DTB passing address (CONFIG_XILINX_OF_BOARD_DTB_ADDR) 0x17fffe70 - CONFIG_SPL_STACK_R_ADDR - is used for GD 0x18000000 is used for SPL stack (CONFIG_SPL_STACK_R_ADDR) 0x20000000-0x21000000 is used for SPL malloc area (CONFIG_SYS_SPL_MALLOC_START, CONFIG_SYS_SPL_MALLOC_SIZE) Signed-off-by: Michal Simek --- diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index f516ab62d3..7ccce6f541 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -8,6 +8,9 @@ CONFIG_SYS_MEMTEST_END=0x00001000 CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC" +CONFIG_SPL_STACK_R_ADDR=0x18000000 +CONFIG_SPL_SIZE_LIMIT=0x2a000 +CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0 CONFIG_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y @@ -26,6 +29,7 @@ CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run scsi_init;usb start" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_STACK_R=y CONFIG_SPL_FPGA=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y