From: Madalin Bucur Date: Thu, 23 Apr 2020 13:25:18 +0000 (+0300) Subject: driver: net: fm: add DM MDIO support X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=20e0f629527f9cef0c2afb473f7978dc393f80ea;p=u-boot.git driver: net: fm: add DM MDIO support Allow the MDIO devices to be probed based on the device tree. Signed-off-by: Madalin Bucur Reviewed-by: Priyanka Jain --- diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c index c2ef1b4e73..4cbfbc70ab 100644 --- a/drivers/net/fm/memac_phy.c +++ b/drivers/net/fm/memac_phy.c @@ -22,6 +22,12 @@ #define memac_setbits_32(a, v) setbits_be32(a, v) #endif +#ifdef CONFIG_DM_ETH +struct fm_mdio_priv { + struct memac_mdio_controller *regs; +}; +#endif + static u32 memac_in_32(u32 *reg) { #ifdef CONFIG_SYS_MEMAC_LITTLE_ENDIAN @@ -39,10 +45,23 @@ static u32 memac_in_32(u32 *reg) int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, int regnum, u16 value) { + struct memac_mdio_controller *regs; u32 mdio_ctl; - struct memac_mdio_controller *regs = bus->priv; u32 c45 = 1; /* Default to 10G interface */ +#ifndef CONFIG_DM_ETH + regs = bus->priv; +#else + struct fm_mdio_priv *priv; + + if (!bus->priv) + return -EINVAL; + priv = dev_get_priv(bus->priv); + regs = priv->regs; + debug("memac_mdio_write(regs %p, port %d, dev %d, reg %d, val %#x)\n", + regs, port_addr, dev_addr, regnum, value); +#endif + if (dev_addr == MDIO_DEVAD_NONE) { c45 = 0; /* clause 22 */ dev_addr = regnum & 0x1f; @@ -84,13 +103,26 @@ int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, int regnum) { + struct memac_mdio_controller *regs; u32 mdio_ctl; - struct memac_mdio_controller *regs = bus->priv; u32 c45 = 1; +#ifndef CONFIG_DM_ETH + regs = bus->priv; +#else + struct fm_mdio_priv *priv; + + if (!bus->priv) + return -EINVAL; + priv = dev_get_priv(bus->priv); + regs = priv->regs; +#endif + if (dev_addr == MDIO_DEVAD_NONE) { +#ifndef CONFIG_DM_ETH if (!strcmp(bus->name, DEFAULT_FM_TGEC_MDIO_NAME)) return 0xffff; +#endif c45 = 0; /* clause 22 */ dev_addr = regnum & 0x1f; memac_clrbits_32(®s->mdio_stat, MDIO_STAT_ENC); @@ -133,6 +165,7 @@ int memac_mdio_reset(struct mii_dev *bus) return 0; } +#ifndef CONFIG_DM_ETH int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info) { struct mii_dev *bus = mdio_alloc(); @@ -167,3 +200,105 @@ int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info) return mdio_register(bus); } + +#else /* CONFIG_DM_ETH */ +#if defined(CONFIG_PHYLIB) && defined(CONFIG_DM_MDIO) +static int fm_mdio_read(struct udevice *dev, int addr, int devad, int reg) +{ + struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) : + NULL; + + if (pdata && pdata->mii_bus) + return memac_mdio_read(pdata->mii_bus, addr, devad, reg); + + return -1; +} + +static int fm_mdio_write(struct udevice *dev, int addr, int devad, int reg, + u16 val) +{ + struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) : + NULL; + + if (pdata && pdata->mii_bus) + return memac_mdio_write(pdata->mii_bus, addr, devad, reg, val); + + return -1; +} + +static int fm_mdio_reset(struct udevice *dev) +{ + struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) : + NULL; + + if (pdata && pdata->mii_bus) + return memac_mdio_reset(pdata->mii_bus); + + return -1; +} + +static const struct mdio_ops fm_mdio_ops = { + .read = fm_mdio_read, + .write = fm_mdio_write, + .reset = fm_mdio_reset, +}; + +static const struct udevice_id fm_mdio_ids[] = { + { .compatible = "fsl,fman-memac-mdio" }, + {} +}; + +static int fm_mdio_probe(struct udevice *dev) +{ + struct fm_mdio_priv *priv = (dev) ? dev_get_priv(dev) : NULL; + struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) : + NULL; + + if (!dev) { + printf("%s dev = NULL\n", __func__); + return -1; + } + if (!priv) { + printf("dev_get_priv(dev %p) = NULL\n", dev); + return -1; + } + priv->regs = (void *)(uintptr_t)dev_read_addr(dev); + debug("%s priv %p @ regs %p, pdata %p\n", __func__, + priv, priv->regs, pdata); + + /* + * On some platforms like B4860, default value of MDIO_CLK_DIV bits + * in mdio_stat(mdio_cfg) register generates MDIO clock too high + * (much higher than 2.5MHz), violating the IEEE specs. + * On other platforms like T1040, default value of MDIO_CLK_DIV bits + * is zero, so MDIO clock is disabled. + * So, for proper functioning of MDIO, MDIO_CLK_DIV bits needs to + * be properly initialized. + * The default NEG bit should be '1' as per FMANv3 RM, but on platforms + * like T2080QDS, this bit default is '0', which leads to MDIO failure + * on XAUI PHY, so set this bit definitely. + */ + if (priv && priv->regs && priv->regs->mdio_stat) + memac_setbits_32(&priv->regs->mdio_stat, + MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG); + + return 0; +} + +static int fm_mdio_remove(struct udevice *dev) +{ + return 0; +} + +U_BOOT_DRIVER(fman_mdio) = { + .name = "fman_mdio", + .id = UCLASS_MDIO, + .of_match = fm_mdio_ids, + .probe = fm_mdio_probe, + .remove = fm_mdio_remove, + .ops = &fm_mdio_ops, + .priv_auto_alloc_size = sizeof(struct fm_mdio_priv), + .platdata_auto_alloc_size = sizeof(struct mdio_perdev_priv), +}; +#endif /* CONFIG_PHYLIB && CONFIG_DM_MDIO */ +#endif /* CONFIG_DM_ETH */