From: Sean Anderson <sean.anderson@seco.com>
Date: Fri, 5 Feb 2021 14:39:01 +0000 (-0500)
Subject: doc: Rename k210 partitions anchor
X-Git-Tag: v2025.01-rc5-pxa1908~1986^2~4
X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=1500c79dc3b1c67c492abec14badbb8efc576478;p=u-boot.git

doc: Rename k210 partitions anchor

This anchor is only for the k210 partition layout, so rename it
appropriately. This keeps it from conflicting with the (to be added)
anchor for U-Boot partitions in general.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---

diff --git a/doc/board/sipeed/maix.rst b/doc/board/sipeed/maix.rst
index bf945b3458..ef79297ef0 100644
--- a/doc/board/sipeed/maix.rst
+++ b/doc/board/sipeed/maix.rst
@@ -258,7 +258,7 @@ SPI Flash
 """""""""
 
 To load an image off of SPI flash, first set up a partition as described in
-:ref:`partitions`. Then, use ``mtd`` to load that partition
+:ref:`k210_partitions`. Then, use ``mtd`` to load that partition
 
 .. code-block:: none
 
@@ -401,7 +401,7 @@ Sipeed MAIX boards typically provide around 16 MiB of SPI NOR flash. U-Boot is
 stored in the first 1 MiB or so of this flash. U-Boot's environment is stored at
 the end of flash.
 
-.. _partitions:
+.. _k210_partitions:
 
 Partitions
 """"""""""