From: Peng Fan Date: Tue, 26 Jul 2022 08:41:09 +0000 (+0800) Subject: arm: dts: Add i.MX93 SoC DTSi file X-Git-Url: http://git.dujemihanovic.xyz/html/static/git-favicon.png?a=commitdiff_plain;h=0da3d96e109b93a2e6248cbac25c177e03a6837e;p=u-boot.git arm: dts: Add i.MX93 SoC DTSi file Add the DTSi file and DT header files for i.MX93 SoC Signed-off-by: Ye Li Signed-off-by: Alice Guo Signed-off-by: Peng Fan --- diff --git a/arch/arm/dts/imx93.dtsi b/arch/arm/dts/imx93.dtsi new file mode 100644 index 0000000000..28026ccecc --- /dev/null +++ b/arch/arm/dts/imx93.dtsi @@ -0,0 +1,688 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 NXP + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "imx93-pinfunc.h" + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + ethernet0 = &fec; + ethernet1 = &eqos; + serial0 = &lpuart1; + serial1 = &lpuart2; + serial2 = &lpuart3; + serial3 = &lpuart4; + serial4 = &lpuart5; + serial5 = &lpuart6; + serial6 = &lpuart7; + serial7 = &lpuart8; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + i2c4 = &lpi2c5; + i2c5 = &lpi2c6; + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A55_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0>; + enable-method = "psci"; + #cooling-cells = <2>; + }; + + A55_1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + #cooling-cells = <2>; + }; + + }; + + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + clock-frequency = <24000000>; + arm,no-tick-in-suspend; + interrupt-parent = <&gic>; + }; + + gic: interrupt-controller@48000000 { + compatible = "arm,gic-v3"; + reg = <0 0x48000000 0 0x10000>, + <0 0x48040000 0 0xc0000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = ; + interrupt-parent = <&gic>; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x80000000>, + <0x28000000 0x0 0x28000000 0x10000000>; + + aips1: bus@44000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x44000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mu1: mailbox@44230000 { + compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; + reg = <0x44230000 0x10000>; + interrupts = ; + #mbox-cells = <2>; + status = "disabled"; + }; + + anomix_ns_gpr: blk-ctrl-anomix@42420000 { + compatible = "syscon"; + reg = <0x44210000 0x1000>; + }; + + system_counter: timer@44290000 { + compatible = "nxp,sysctr-timer"; + reg = <0x44290000 0x30000>; + interrupts = ; + clocks = <&osc_24m>; + clock-names = "per"; + }; + + i3c1: i3c-master@44330000 { + #address-cells = <3>; + #size-cells = <0>; + compatible = "fsl,imx93-i3c-master", "silvaco,i3c-master"; + reg = <0x44330000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_I3C1_GATE>, + <&clk IMX93_CLK_I3C1_GATE>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "pclk", "fast_clk", "slow_clk"; + status = "disabled"; + }; + + lpi2c1: i2c@44340000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x44340000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C1_GATE>, + <&clk IMX93_CLK_LPI2C1_GATE>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c2: i2c@44350000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x44350000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C2_GATE>, + <&clk IMX93_CLK_LPI2C2_GATE>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi1: spi@44360000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x44360000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPSPI1_GATE>, + <&clk IMX93_CLK_LPSPI1_GATE>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi2: spi@44370000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x44370000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPSPI2_GATE>, + <&clk IMX93_CLK_LPSPI2_GATE>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpuart1: serial@44380000 { + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x44380000 0x1000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPUART1_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart2: serial@44390000 { + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x44390000 0x1000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPUART2_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + iomuxc: pinctrl@443c0000 { + compatible = "fsl,imx93-iomuxc"; + reg = <0x443c0000 0x10000>; + }; + + clk: clock-controller@44450000 { + compatible = "fsl,imx93-ccm"; + reg = <0x44450000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>; + clock-names = "osc_32k", "osc_24m", "clk_ext1"; + assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>; + assigned-clock-rates = <393216000>; + status = "okay"; + }; + + anatop: anatop@44480000 { + compatible = "fsl,imx93-anatop", "syscon"; + reg = <0x44480000 0x10000>; + }; + + adc1: adc@44530000 { + compatible = "nxp,imx93-adc"; + reg = <0x44530000 0x10000>; + interrupts = , + , + , + ; + clocks = <&clk IMX93_CLK_ADC1_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + }; + + aips2: bus@42000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x42000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + wakeupmix_gpr: blk-ctrl-wakeupmix@42420000 { + compatible = "syscon"; + reg = <0x42420000 0x1000>; + }; + + mu2: mailbox@42440000 { + compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; + reg = <0x42440000 0x10000>; + interrupts = ; + #mbox-cells = <2>; + status = "disabled"; + }; + + wdog3: wdog@42490000 { + compatible = "fsl,imx93-wdt"; + reg = <0x42490000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_WDOG3_GATE>; + timeout-sec = <40>; + status = "disabled"; + }; + + tpm4: pwm@424f0000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x424f0000 0x1000>; + clocks = <&clk IMX93_CLK_TPM4_GATE>; + assigned-clocks = <&clk IMX93_CLK_TPM4>; + assigned-clock-parents = <&clk IMX93_CLK_24M>; + assigned-clock-rates = <24000000>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i3c2: i3c-master@42520000 { + #address-cells = <3>; + #size-cells = <0>; + compatible = "fsl,imx93-i3c-master", "silvaco,i3c-master"; + reg = <0x42520000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_I3C2_GATE>, + <&clk IMX93_CLK_I3C2_GATE>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "pclk", "fast_clk", "slow_clk"; + status = "disabled"; + }; + + lpi2c3: i2c@42530000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x42530000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C3_GATE>, + <&clk IMX93_CLK_LPI2C3_GATE>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c4: i2c@42540000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x42540000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C4_GATE>, + <&clk IMX93_CLK_LPI2C4_GATE>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi3: spi@42550000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x42550000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPSPI3_GATE>, + <&clk IMX93_CLK_LPSPI3_GATE>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi4: spi@42560000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x42560000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPSPI4_GATE>, + <&clk IMX93_CLK_LPSPI4_GATE>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpuart3: serial@42570000 { + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x42570000 0x1000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPUART3_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart4: serial@42580000 { + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x42580000 0x1000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPUART4_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart5: serial@42590000 { + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x42590000 0x1000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPUART5_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart6: serial@425a0000 { + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x425a0000 0x1000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPUART6_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + flexspi: spi@425e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,imx8mm-fspi"; + reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = ; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "fspi", "fspi_en"; + status = "disabled"; + }; + + lpuart7: serial@42690000 { + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x42690000 0x1000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPUART7_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart8: serial@426a0000 { + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x426a0000 0x1000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPUART8_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpi2c5: i2c@426b0000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426b0000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C5_GATE>, + <&clk IMX93_CLK_LPI2C5_GATE>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c6: i2c@426c0000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426c0000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C6_GATE>, + <&clk IMX93_CLK_LPI2C6_GATE>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + }; + + aips3: bus@42800000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x42800000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usdhc1: mmc@42850000 { + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x42850000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_USDHC1_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <8>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc2: mmc@42860000 { + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x42860000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_USDHC2_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + fec: ethernet@42890000 { + compatible = "fsl,imx93-fec", "fsl,imx8mp-fec", "fsl,imx8mq-fec"; + reg = <0x42890000 0x10000>; + interrupts = , + , + , + ; + clocks = <&clk IMX93_CLK_WAKEUP_AXI>, + <&clk IMX93_CLK_WAKEUP_AXI>, + <&clk IMX93_CLK_ENET_TIMER1>, + <&clk IMX93_CLK_ENET_REF>, + <&clk IMX93_CLK_ENET_REF_PHY>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>, + <&clk IMX93_CLK_ENET_REF>, + <&clk IMX93_CLK_ENET_REF_PHY>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <100000000>, <250000000>, <50000000>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + fsl,wakeup_irq = <2>; + status = "disabled"; + }; + + eqos: ethernet@428a0000 { + compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a"; + reg = <0x428a0000 0x10000>; + interrupts = , + ; + interrupt-names = "eth_wake_irq", "macirq"; + clocks = <&clk IMX93_CLK_WAKEUP_AXI>, + <&clk IMX93_CLK_WAKEUP_AXI>, + <&clk IMX93_CLK_ENET_TIMER2>, + <&clk IMX93_CLK_ENET>, + <&clk IMX93_CLK_WAKEUP_AXI>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; + assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>, + <&clk IMX93_CLK_ENET>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>; + assigned-clock-rates = <100000000>, <250000000>; + intf_mode = <&wakeupmix_gpr 0x28>; + clk_csr = <0>; + status = "disabled"; + }; + + usdhc3: mmc@428b0000 { + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x428b0000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_USDHC3_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + }; + + gpio2: gpio@43810000 { + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43810080 0x1000>, <0x43810040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = , + ; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 32 32>; + }; + + gpio3: gpio@43820000 { + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43820080 0x1000>, <0x43820040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = , + ; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 64 32>; + }; + + gpio4: gpio@43830000 { + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43830080 0x1000>, <0x43830040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = , + ; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 96 32>; + }; + + gpio1: gpio@47400000 { + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; + reg = <0x47400080 0x1000>, <0x47400040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = , + ; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 0 32>; + }; + + ocotp: efuse@47510000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx93-ocotp", "syscon"; + reg = <0x47510000 0x1000>; + status = "disabled"; + }; + + s4muap: s4muap@47520000 { + compatible = "fsl,imx93-mu-s4"; + reg = <0x47520000 0x10000>; + interrupts = , + ; + interrupt-names = "txirq", "rxirq"; + #mbox-cells = <2>; + status = "okay"; + }; + + sentnl_mu: sentnl-mu { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx-sentnl"; + mboxes = <&s4muap 0 0 &s4muap 1 0>; + mbox-names = "tx", "rx"; + fsl,sentnl_mu_id = <2>; + fsl,sentnl_mu_max_users = <4>; + status = "okay"; + dma-ranges = <0x80000000 0x80000000 0x20000000>; + }; + + ddr-pmu@4e300e00 { + compatible = "fsl,imx93-ddr-pmu"; + reg = <0x4e300dc0 0x200>; /* _dc0 ~ _eb8 */ + interrupts = ; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>; + clock-names = "main_clk"; + }; + + usbotg1: usb@4c100000 { + compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; + reg = <0x4c100000 0x200>; + interrupts = ; + clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>; + assigned-clock-parents = <&clk IMX93_CLK_HSIO>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + status = "disabled"; + }; + + usbmisc1: usbmisc@4c100200 { + compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x4c100200 0x200>; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>; + clock-names = "main_clk"; + }; + + usbotg2: usb@4c200000 { + compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; + reg = <0x4c200000 0x200>; + interrupts = ; + clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>; + clock-names = "usb2_ctrl_root_clk"; + assigned-clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>; + assigned-clock-parents = <&clk IMX93_CLK_HSIO>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + status = "disabled"; + }; + + usbmisc2: usbmisc@4c200200 { + compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x4c200200 0x200>; + }; + }; +}; diff --git a/include/dt-bindings/clock/imx93-clock.h b/include/dt-bindings/clock/imx93-clock.h new file mode 100644 index 0000000000..4ea6864b41 --- /dev/null +++ b/include/dt-bindings/clock/imx93-clock.h @@ -0,0 +1,203 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */ +/* + * Copyright 2021 NXP + */ + +#ifndef __DT_BINDINGS_CLOCK_IMX93_CLK_H +#define __DT_BINDINGS_CLOCK_IMX93_CLK_H + +#define IMX93_CLK_DUMMY 0 +#define IMX93_CLK_24M 1 +#define IMX93_CLK_EXT1 2 +#define IMX93_CLK_SYS_PLL_PFD0 3 +#define IMX93_CLK_SYS_PLL_PFD0_DIV2 4 +#define IMX93_CLK_SYS_PLL_PFD1 5 +#define IMX93_CLK_SYS_PLL_PFD1_DIV2 6 +#define IMX93_CLK_SYS_PLL_PFD2 7 +#define IMX93_CLK_SYS_PLL_PFD2_DIV2 8 +#define IMX93_CLK_AUDIO_PLL 9 +#define IMX93_CLK_VIDEO_PLL 10 +#define IMX93_CLK_A55_PERIPH 11 +#define IMX93_CLK_A55_MTR_BUS 12 +#define IMX93_CLK_A55 13 +#define IMX93_CLK_M33 14 +#define IMX93_CLK_BUS_WAKEUP 15 +#define IMX93_CLK_BUS_AON 16 +#define IMX93_CLK_WAKEUP_AXI 17 +#define IMX93_CLK_SWO_TRACE 18 +#define IMX93_CLK_M33_SYSTICK 19 +#define IMX93_CLK_FLEXIO1 20 +#define IMX93_CLK_FLEXIO2 21 +#define IMX93_CLK_LPIT1 22 +#define IMX93_CLK_LPIT2 23 +#define IMX93_CLK_LPTMR1 24 +#define IMX93_CLK_LPTMR2 25 +#define IMX93_CLK_TPM1 26 +#define IMX93_CLK_TPM2 27 +#define IMX93_CLK_TPM3 28 +#define IMX93_CLK_TPM4 29 +#define IMX93_CLK_TPM5 30 +#define IMX93_CLK_TPM6 31 +#define IMX93_CLK_FLEXSPI1 32 +#define IMX93_CLK_CAN1 33 +#define IMX93_CLK_CAN2 34 +#define IMX93_CLK_LPUART1 35 +#define IMX93_CLK_LPUART2 36 +#define IMX93_CLK_LPUART3 37 +#define IMX93_CLK_LPUART4 38 +#define IMX93_CLK_LPUART5 39 +#define IMX93_CLK_LPUART6 40 +#define IMX93_CLK_LPUART7 41 +#define IMX93_CLK_LPUART8 42 +#define IMX93_CLK_LPI2C1 43 +#define IMX93_CLK_LPI2C2 44 +#define IMX93_CLK_LPI2C3 45 +#define IMX93_CLK_LPI2C4 46 +#define IMX93_CLK_LPI2C5 47 +#define IMX93_CLK_LPI2C6 48 +#define IMX93_CLK_LPI2C7 49 +#define IMX93_CLK_LPI2C8 50 +#define IMX93_CLK_LPSPI1 51 +#define IMX93_CLK_LPSPI2 52 +#define IMX93_CLK_LPSPI3 53 +#define IMX93_CLK_LPSPI4 54 +#define IMX93_CLK_LPSPI5 55 +#define IMX93_CLK_LPSPI6 56 +#define IMX93_CLK_LPSPI7 57 +#define IMX93_CLK_LPSPI8 58 +#define IMX93_CLK_I3C1 59 +#define IMX93_CLK_I3C2 60 +#define IMX93_CLK_USDHC1 61 +#define IMX93_CLK_USDHC2 62 +#define IMX93_CLK_USDHC3 63 +#define IMX93_CLK_SAI1 64 +#define IMX93_CLK_SAI2 65 +#define IMX93_CLK_SAI3 66 +#define IMX93_CLK_CCM_CKO1 67 +#define IMX93_CLK_CCM_CKO2 68 +#define IMX93_CLK_CCM_CKO3 69 +#define IMX93_CLK_CCM_CKO4 70 +#define IMX93_CLK_HSIO 71 +#define IMX93_CLK_HSIO_USB_TEST_60M 72 +#define IMX93_CLK_HSIO_ACSCAN_80M 73 +#define IMX93_CLK_HSIO_ACSCAN_480M 74 +#define IMX93_CLK_ML_APB 75 +#define IMX93_CLK_ML 76 +#define IMX93_CLK_MEDIA_AXI 77 +#define IMX93_CLK_MEDIA_APB 78 +#define IMX93_CLK_MEDIA_LDB 79 +#define IMX93_CLK_MEDIA_DISP_PIX 80 +#define IMX93_CLK_CAM_PIX 81 +#define IMX93_CLK_MIPI_TEST_BYTE 82 +#define IMX93_CLK_MIPI_PHY_CFG 83 +#define IMX93_CLK_ADC 84 +#define IMX93_CLK_PDM 85 +#define IMX93_CLK_TSTMR1 86 +#define IMX93_CLK_TSTMR2 87 +#define IMX93_CLK_MQS1 88 +#define IMX93_CLK_MQS2 89 +#define IMX93_CLK_AUDIO_XCVR 90 +#define IMX93_CLK_SPDIF 91 +#define IMX93_CLK_ENET 92 +#define IMX93_CLK_ENET_TIMER1 93 +#define IMX93_CLK_ENET_TIMER2 94 +#define IMX93_CLK_ENET_REF 95 +#define IMX93_CLK_ENET_REF_PHY 96 +#define IMX93_CLK_I3C1_SLOW 97 +#define IMX93_CLK_I3C2_SLOW 98 +#define IMX93_CLK_USB_PHY_BURUNIN 99 +#define IMX93_CLK_PAL_CAME_SCAN 100 +#define IMX93_CLK_A55_GATE 101 +#define IMX93_CLK_CM33_GATE 102 +#define IMX93_CLK_ADC1_GATE 103 +#define IMX93_CLK_WDOG1_GATE 104 +#define IMX93_CLK_WDOG2_GATE 105 +#define IMX93_CLK_WDOG3_GATE 106 +#define IMX93_CLK_WDOG4_GATE 107 +#define IMX93_CLK_WDOG5_GATE 108 +#define IMX93_CLK_SEMA1_GATE 109 +#define IMX93_CLK_SEMA2_GATE 110 +#define IMX93_CLK_MU_A_GATE 111 +#define IMX93_CLK_MU_B_GATE 112 +#define IMX93_CLK_EDMA1_GATE 113 +#define IMX93_CLK_EDMA2_GATE 114 +#define IMX93_CLK_FLEXSPI1_GATE 115 +#define IMX93_CLK_GPIO1_GATE 116 +#define IMX93_CLK_GPIO2_GATE 117 +#define IMX93_CLK_GPIO3_GATE 118 +#define IMX93_CLK_GPIO4_GATE 119 +#define IMX93_CLK_FLEXIO1_GATE 120 +#define IMX93_CLK_FLEXIO2_GATE 121 +#define IMX93_CLK_LPIT1_GATE 122 +#define IMX93_CLK_LPIT2_GATE 123 +#define IMX93_CLK_LPTMR1_GATE 124 +#define IMX93_CLK_LPTMR2_GATE 125 +#define IMX93_CLK_TPM1_GATE 126 +#define IMX93_CLK_TPM2_GATE 127 +#define IMX93_CLK_TPM3_GATE 128 +#define IMX93_CLK_TPM4_GATE 129 +#define IMX93_CLK_TPM5_GATE 130 +#define IMX93_CLK_TPM6_GATE 131 +#define IMX93_CLK_CAN1_GATE 132 +#define IMX93_CLK_CAN2_GATE 133 +#define IMX93_CLK_LPUART1_GATE 134 +#define IMX93_CLK_LPUART2_GATE 135 +#define IMX93_CLK_LPUART3_GATE 136 +#define IMX93_CLK_LPUART4_GATE 137 +#define IMX93_CLK_LPUART5_GATE 138 +#define IMX93_CLK_LPUART6_GATE 139 +#define IMX93_CLK_LPUART7_GATE 140 +#define IMX93_CLK_LPUART8_GATE 141 +#define IMX93_CLK_LPI2C1_GATE 142 +#define IMX93_CLK_LPI2C2_GATE 143 +#define IMX93_CLK_LPI2C3_GATE 144 +#define IMX93_CLK_LPI2C4_GATE 145 +#define IMX93_CLK_LPI2C5_GATE 146 +#define IMX93_CLK_LPI2C6_GATE 147 +#define IMX93_CLK_LPI2C7_GATE 148 +#define IMX93_CLK_LPI2C8_GATE 149 +#define IMX93_CLK_LPSPI1_GATE 150 +#define IMX93_CLK_LPSPI2_GATE 151 +#define IMX93_CLK_LPSPI3_GATE 152 +#define IMX93_CLK_LPSPI4_GATE 153 +#define IMX93_CLK_LPSPI5_GATE 154 +#define IMX93_CLK_LPSPI6_GATE 155 +#define IMX93_CLK_LPSPI7_GATE 156 +#define IMX93_CLK_LPSPI8_GATE 157 +#define IMX93_CLK_I3C1_GATE 158 +#define IMX93_CLK_I3C2_GATE 159 +#define IMX93_CLK_USDHC1_GATE 160 +#define IMX93_CLK_USDHC2_GATE 161 +#define IMX93_CLK_USDHC3_GATE 162 +#define IMX93_CLK_SAI1_GATE 163 +#define IMX93_CLK_SAI2_GATE 164 +#define IMX93_CLK_SAI3_GATE 165 +#define IMX93_CLK_MIPI_CSI_GATE 166 +#define IMX93_CLK_MIPI_DSI_GATE 167 +#define IMX93_CLK_LVDS_GATE 168 +#define IMX93_CLK_LCDIF_GATE 169 +#define IMX93_CLK_PXP_GATE 170 +#define IMX93_CLK_ISI_GATE 171 +#define IMX93_CLK_NIC_MEDIA_GATE 172 +#define IMX93_CLK_USB_CONTROLLER_GATE 173 +#define IMX93_CLK_USB_TEST_60M_GATE 174 +#define IMX93_CLK_HSIO_TROUT_24M_GATE 175 +#define IMX93_CLK_PDM_GATE 176 +#define IMX93_CLK_MQS1_GATE 177 +#define IMX93_CLK_MQS2_GATE 178 +#define IMX93_CLK_AUD_XCVR_GATE 179 +#define IMX93_CLK_SPDIF_GATE 180 +#define IMX93_CLK_HSIO_32K_GATE 181 +#define IMX93_CLK_ENET1_GATE 182 +#define IMX93_CLK_ENET_QOS_GATE 183 +#define IMX93_CLK_SYS_CNT_GATE 184 +#define IMX93_CLK_TSTMR1_GATE 185 +#define IMX93_CLK_TSTMR2_GATE 186 +#define IMX93_CLK_TMC_GATE 187 +#define IMX93_CLK_PMRO_GATE 188 +#define IMX93_CLK_32K 189 +#define IMX93_CLK_SAI1_IPG 190 +#define IMX93_CLK_SAI2_IPG 191 +#define IMX93_CLK_SAI3_IPG 192 +#define IMX93_CLK_END 193 +#endif diff --git a/include/dt-bindings/power/imx93-power.h b/include/dt-bindings/power/imx93-power.h new file mode 100644 index 0000000000..4e27a2e280 --- /dev/null +++ b/include/dt-bindings/power/imx93-power.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2021 NXP + */ + +#ifndef __DT_BINDINGS_IMX93_POWER_H__ +#define __DT_BINDINGS_IMX93_POWER_H__ + +#define IMX93_POWER_DOMAIN_MLMIX 0 +#define IMX93_POWER_DOMAIN_MEDIAMIX 1 + +#endif